Halo XT1000 User Manual
Laser Range Finder
User’s Manual Model # XT1000
INCLUDED ITEMS
1) Laser Range Finder Unit
2) Carrying Case
3) Lanyard
4) Lens Cloth
5) Product Information Guide
6) CR2 Battery
Laser Range Finder
User’s Manual Model # XT1000
page 2
GETTING STARTED
page 3
1
To open the battery compartment
cover on the back of the unit pull
up the Tab and turn it to the left, according to the compartment door.
The arrows will match up and the
cover can now be removed.
2
Once the battery compartment
cover is removed insert a CR2
battery with the plus (+) facing down.
+
-
page 4
3
To close the battery compart-
ment cover align the arrows (the
tabs can only go in one way) then
push down and turn it to the right,
according to the compartment door.
4
Install lanyard strap, Turn unit over to
the bottom side and insert one end of
the lanyard thru the hole. Push “long” end of
lanyard thru the small loop and pull taught.
page 5
5
Locate and press the Power button
briefly to turn the unit on. 6
The LCD will show one of 4 images,
depending on what setting was on
when last powered off.
Displays shown are in NormalDistance Mode
Power Button
M
Loading...