Halo Htoc User Manual

3 IN 1 CABLE

CHARGE INSTRUCTIONS

1. Plug the USB end directly into any USB port.

2. To charge Apple devices, attach the lighting tip over the
Micro USB tip. Plug the lightning tip into your Apple device
to begin charging.

3. To charge Android devices, plug the Micro USB adapter
located underneath the lightning tip into your device to
begin charging.

4. To charge USB-C compatible devices, connect the USB-C
connector to the micro USB connector and plug into your
device to begin charging.

SYNC INSTRUCTIONS

1. Plug the USB end directly into any USB port.

2. To sync Apple devices, attach the lighting tip over the Micro
USB tip. Plug the lightning tip into your Apple device to
begin syncing.

3. To sync Android devices, plug the Micro USB adapter
located underneath the lightning tip into your device to
begin syncing.

4. To sync USB-C compatible devices, connect the USB-C
connector to the micro USB connector and plug into your
device to begin syncing.

MADE FOR IPOD/IPHONE/IPAD

The HALO 3 IN 1 CABLE is Apple certied. “Made for iPod,”
“Made for iPhone,” and “Made for iPad” means that an
electronic accessory has been designed to connect
specically to iPod, iPhone, or iPad, respectively, and has
been certied by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with
iPod, iPhone, or iPad may aect wireless performance. AirPlay,
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and
Retina are trademarks of Apple Inc., registered in the U.S. and
other countries. iPad Air, iPad mini, and Lightning is a
trademarks of Apple Inc.

MAINTENANCE AND CARE

● Do not get your HALO 3 IN 1 CABLE wet or store in extreme