Halo 8400 User Manual

8400

Operating Instructions

Contents

Introduction 1

Operating Instructions 2-5

Demonstrations 6-8

Storing/Handling/Cleaning 9

Safety Precautions 9-10

Specifications 10

FCC Compliance Statement 11-12

Limited Warranty 12-14

Contact Information 14

To contact us, email us at support@halo2cloud.com

or call 888-907-6274

What’s Included With Your HALO Pocket Power 8400

IN 5V/1A

OUT 5V/2A MAX

OUT 5V/1A

1. Power button (turn ON/OFF)

2. LED battery indicator lights

3. Micro USB input port (5V/1A)

4. Standard USB output port (5V/1A)

5. Standard USB output port (5V/2A)

6. Standard USB to Micro USB Cable

Included Items:

- HALO Pocket Power 8400

- Standard USB to Micro USB Cable

- Carrying Pouch

- Operating Instructions

Operating Instructions Getting Started

Quickly press and release the power button to determine if your HALO charger is full. The LED battery indicator will display four solid blue lights when fully charged. Charge your HALO charger until all four LED lights on the front of your charger turn solid blue (no lights should be flashing).

Check Your HALO Charger’s Battery Level

Indicator Lights How To Read Amount of Charge

One solid light 0%-25%

Two solid lights 26%-50%

Three solid lights 51%-75%

Four solid lights 76%-100%

Reading Your LED Battery Indicator While Charging Your HALO Charger

Indicator Lights How To Read Amount of Charge

First light blinking 0%-25%

First light solid, 26%-50%

second light blinking

First two lights solid, 51%-75%

third light blinking

First three lights solid, 76%-99%

fourth blinking

All four lights solid 100% fully charged

Turning your HALO Pocket Power 8400 ON/OFF

To turn on, press the power button, and the LED lights on the side of your HALO charger will illuminate. Press and hold the power button for three seconds to turn off. Your HALO charger is also equipped with an auto on/off feature. Your charger will automatically turn on and begin charging when an electronic device is plugged in and will automatically shut off after 30 seconds if not in use.

Charging your HALO Pocket Power 8400

To recharge your HALO charger, using the provided Standard USB to Micro USB cable, plug the Micro USB tip into the charger’s 5V/1A Micro Input port. Next, connect the USB end of the Standard USB to Micro USB cable into the Standard USB port on your computer or into an AC wall adapter that accepts a Standard USB connection. Your HALO charger will automatically begin charging. Charge your HALO charger for a full six hours. See Demonstration 1 on Page 6 for more information.

Charging An Electronic Device Using 5V/1A Output Port

For personal electronic devices with a Micro USB port, plug the Micro USB tip of the Standard USB to Micro USB cable into your electronic device. Next, plug the Standard USB end of the Standard USB to Micro USB cable into your HALO charger’s 5V/1A Output port. Your HALO charger is also compatible with the charging cable provided with your personal electronic device. To use, plug the Standard USB end of the cable into your HALO charger’s 5V/1A USB output port.

Charging An Electronic Device Using 5V/2A Output Port

The 5V/2A port will charge the same devices as the 5V/1A port but at a faster speed. The 5V/2A port is recommended when charging tablets and other larger electronic devices. Repeat the steps above under “Charging An Electronic Device Using 5V/1A OUT Port” for Micro USB port devices, but instead, plug the Standard USB end of the Standard USB to Micro USB cable into your HALO charger’s 5V/2A OUT port. Your HALO charger is also compatible with the charging cable provided with your personal electronic device. To use, plug the Standard USB end of the cable into your HALO charger’s 5V/1A USB output port.

Charging Two Electronic Devices

You can simultaneously charge two devices by using both the 5V/1A Output port and the 5V/2A Output port on your HALO charger. You will need to use both the provided Standard USB to Micro USB cable and the cable that came with your personal electronic device to use both Output ports at the same time.

Intelligent Recognition

Your HALO charger is programmed with an intelligent recognition system to achieve higher compatibility for charging different mobile phones. If it does not charge when connected to your mobile phone, please restart your HALO charger.

+ 11 hidden pages