Halo 2800 User Manual

StarLight 2800

OPERATING INSTRUCTIONS

3

4

2

5

1

1. Input port: 5V/1000mA

2. Output port: 5V/1000mA

3. Power Switch

4. Indicator display

5. Flashlight

Included items:

-HALO StarLight 2800 charger unit

-1 USB retractable cable with two micro USB ends

-2 connector tips (30 pin and mini USB)

-Carrying pouch

-Operating Instructions

LED Power Indicator
During recharging: Red
Fully charged: LED turns o
Unit will shine blue while the unit is charging an
electronic device

Getting Started

Charge the HALO StarLight Power Charger until the
LED Power Indicator turns blue. This may take up to
6 hours and will uctuate depending on the
charging power source.

Step 1: Charge the HALO Pocket Power StarLight 2800

TM

Important: Charge your HALO Pocket Power Starlight

TM

2800 the initial time for a full 6 hours before regular
use. After the initial charge, normal charging will take
5-6 hours.

Charging your HALO Pocket Power Starlight 2800:

Using the supplied USB charging cable, plug the micro
USB tip into HALO Pocket Power Starlight 2800 input

TM

port (shown above). Next plug the USB connector to a
computer or an AC power source with a USB 5V
output.