Hallowell HC121212-1DP-MB User Manual
CUBIX™ MODULAR LOCKER
ASSEMBLY INSTRUCTIONS
General Instructions
1. Check material received against the packing list. Check the number of packages received and then check the
contents of each package.
2. Check the material received for damage. If damage has occurred, secure a “damage notation” from the carrier
3. Identify each part as it is unpacked and put like parts together as close as possible to the working area where they are
to be assembled.
4. Be careful to use the correct hardware as specified in the assembly instructions.
CAUTION
In the interest of safety, all lockers must be securely anchored to the floor and/or wall. For safety, handle all components
carefully and wear work gloves when assembling lockers. Install all units plumb and tighten all hardware securely. Retain
instructions for future reference.
866-566-0500
info@Hallowell-List.com
www.Hallowell-List.com
ITEM
NO.
1
2
PART NUMBER
HCFS1212/18
HCSP1212/18
DESCRIPTION
TOP/BOTTOM
SIDE PANEL
QTY.
2
2
REV.
A
REVISIONS
DESCRIPTION
RV101P WAS MBT400 & N104
DATE
3/24/2017
BY
ROW
3
4
5
6
7
8
9
10
11
12
13
14
HCLF12-1FP
KBLP100
LKD1272-
6DP/PL/SVP
HCHF12-1
HCBP1212
KBLH101P
NPH100
MBT200
N201
N110
RV101P
TCS100
LATCH FRAME
DOOR PULL
DOOR
HINGE FRAME
BACK PANEL
LATCH
NUMBER PLATE
BOLT
NUT
DOME NUT
PLASTIC RIVET
SCREW
1
1
1
1
1
1
1
20
18
2
2
3
A
12
678
3
4
5
A
10
THIS DRAWING AND THE INFORMATION ON IT IS THE CONFIDENTIAL PROPERTY OF HALLOWELL. AND SHALL NOT BE COPIED OR DISCLOSED TO OTHERS WITHOUT WRITTEN
PERMISSION. ONLY HALLOWELL RESERVES THE RIGHT TO ALTER ANY DESIGN. ANY UNAUTHORIZED MODIFICATIONS RELEASES HALLOWELL FROM ALL LIABILITIES.
11
12 13
14
TOLERANCES
UNLESS OTHERWISE
SPECIFIED
INCHES
XX. ± .010
XXX. ± .005
FRACTIONAL
X/X. ± 1/64
ANGULAR
± 1/2°
UNLESS OTHERWISE
SPECIFIED ALL
DIMENSIONS ARE IN
INCHES. METRIC
DIMENSIONS WILL BE
WITHIN [XX]
9
2823 W. ORANGE AVE. Tel (866) 566-0500
APOPKA, FLORIDA 32703 Fax (407) 464-3610
DRAWN BY
JIL
CHECKED BY
APPROVED BY
RAM
www.Hallowell-List.com
DATE
1/16/2013
DATE
DATE
3/24/17
DESCRIPTION
SHEET
SCALE
:
1
CUBIX LOCKER
HC12(12/18)12
DRAWING NO.
SA1566
OF
PART NO.
1
REV.
A
Loading...