Halex Madison II, Q-3200, Q-22, 69901 Owner's Manual And Instructions

#69901

Madison II

ELEC TR ON IC D AR TB OARD

Owner’s Manual

And Game Instructions

Halex Electronic Dartboard _ 2

LIMITED-1 YEAR WARRANTY

This Halex product is warranted to be free from defects in workmanship
or materials at the time of purchase for a period of 1 (one) year.

Should any evidence of defects appear within the limited warranty period
after the date of purchase, Regent Sports will either send replacement
parts or advise another course of action. A list of replaceable parts can
be found on the parts order page of this manual. Parts not listed on this
order form are not replaceable. This warranty covers normal consumer
use and does not cover failures, which result from alterations, accidents,
misuse, abuse, or neglect.

For prompt warranty service and special offers, please register your
Halex product. Please be sure to visit our website to order additional
parts not covered under the warranty, as well as on-line instruction
manuals and new product information.

A purchase receipt or other proof of date of purchase will be required

before warranty service is performed. Requests for warranty service can

be provided by e-mailing the Customer Service Department

10:30AM to 6:30 PM, EST. (Dec. through Feb.)
10:30 AM to 5:00 PM, EST. (March through November)

This warranty gives you specific legal rights and you may have other
rights, which vary, from state to state.

• 1 Electronic Dartboard in • Owner’s Manual
molded cabinet • 12 Darts (unassembled)

• A/C Adapter • Soft tip replacement pack

If you are missing a part or have any questions, please call our Customer Service

P

Halex Electronic Dartboard _ 3

Setup / Mounting Instructions

Choose a location to hang the dartboard where there is about 10 feet of open space in
front of the board. The “toe-line” should be 7’ 9 1/4” from the face of the dartboard. Since
this dartboard is powered with an AC adapter, you may want to mount it close to an electric
outlet for convenience.

The mounting holes on this dartboard set are 16” apart so it can be mounted securely on
wall studs in your home. Locate a wall stud and place a mark 79 3/4” from the floor.
Measure 16” from your first mark (staying level with the first mark) and place the second
mark on the wall, which should be over another wall stud (refer to diagram on next page).

Screw 2 mounting screws in the center of the studs using the marks you made as guides.
Be sure the screws are level to ensure an accurate playing surface. If not mounting into
studs, be sure to use drywall anchors or other securing hardware appropriate to the wall
you are using.

Mount the dartboard on the wall by lining up the hang holes on the back with the screws
(see diagram below). It may be necessary to adjust the screws until the board fits snugly
against the wall. If you want to mount the dartboard even more securely to the wall, you
can fasten four screws through the holes located in the catch ring area (the area outside
the scoring segments).

Hang Hole

Hang Hole

Back of Dart Board

 16” 

Halex Electronic Dartboard _ 4

Mounting Instructions (continued)

Center of bullseye should be 5’ 8” from the ground.

Plug the A/C adapter into the wall outlet and into the jack at the bottom right of the
dartboard and you’re ready to play.

X

X

79 ¾”

Wall Studs

7’ 9 ¼”

Toe
Line

5’ 8” from Floor
to center of
Bullseye

Dartboard

Halex Electronic Dartboard _ 5

Dartboard Functions

POWER button - Located on the lower right corner of the dartboard (when doors are

open). Be sure the AC Adapter is plugged into the jack on the right side of the dartboard.
Press the POWER button to turn game on or off.

GAME GUARD button – Press to activate Game Guard Feature

SOUND button – Press continually to set desired volume level or mute.

DOUBLE/MISS button - This button is used to activate the Double In/Double Out and

Master Out options for the “01” games. This function is only active when selecting 301,
401, etc. games. The MISS feature is active during play of any game. Press button to
register a “missed” dart. Player can press when dart lands outside target area so computer
registers a thrown dart.

DART-OUT/SCORE button - The dart-out feature is active only during the “01” games
(301, 401, etc.). When a player’s score falls below 160, he/she can press the DART OUT
button to get a suggestion from the dartboard as to the 3 darts needed to finish the game.
Note: doubles and triples are indicated with 2 and 3 dashes to the left of the number
respectively. The SCORE feature allows player to access score not current on display.

BOUNCE OUT button - Decide before play if you want to count darts that do not remain in
board (“bounce-outs”) or not. If not, simply press the BOUNCE OUT button immediately
after a bounce out occurs to deduct the score that registers.

CYBERMATCH button – Press to activate Cybermatch feature where you can play
against the computer. Press continually to cycle through the 5 different skill levels. See
page 7 for detailed instructions.

PLAYER/PAGE button - This button is used at the start of each game to select the
number of players you want to play the game. In addition, this button allows players to see
other player scores of not on active display. This dartboard keeps track of scores for up to
8 players.

GAME button - Press to page through the on-screen game menu and select game.

SELECT button - Press to select various difficulty settings for games. Many games

contain several difficulty options that can be accessed by pressing this button. Refer to
Game Menu on page 23 for complete list of games.

START/HOLD button - This multi-function button is used to:

• START the game when all options have been selected.

• HOLD to put dartboard in HOLD status between rounds to allow player to
remove darts from the target area.

RESET button – Press to clear display and reset dartboard to opening sound.

Halex Electronic Dartboard _ 6

Electronic Dartboard Operation

1. Press the POWER switch to activate dartboard. A short musical introduction is played
as the display goes through power-up test.

2. Press GAME button until desired game is displayed (see Game Menu on

page 23).

3. Press DOUBLE button (optional) to select starting and/or ending on doubles or

Master Out (used only in 301 - 901 games). This is explained in the game rules
section.

4. Press PLAYER button to select the number of players (1, 2, ... 8). The

default setting is 2 players.

5. Press START/HOLD button (red) to activate game and begin play.

6. Throw darts

• The dart indicator display is located above the numbers in the LED displays.

The lights indicate the number of darts thrown in the round.

• When all 3 darts have been thrown, a voice command will indicate

“Remove Darts” and the score will flash. The darts can now be removed
without affecting the electronic scoring. When all darts are removed from
the playing surface press the START button to go to next player. Voice
command will indicate which player is up. Also, the player indicator lights
will illuminate to show which player’s turn it is.

Display Protective Film

This electronic dartboard may have a clear film over the entire display area and over the
button area to prevent scratching during shipping. It is recommended that you remove this
film so display is easier to read. To remove, simply lift edge, peel off, and discard.

Game Guard Feature

After the START button has been pressed and play has begun, the GAME GUARD feature
can be activated. When the button is pressed, all of the keys will ‘lock’. When Game
Guard is active, a misguided dart hitting a button will not affecting your game. To
deactivate the Game Guard, simply press the button again and the keys will unlock.

Halex Electronic Dartboard _ 7

CyberMatch Feature

This exciting feature allows single player to play against the computer at one of five
different levels of skill! Only 1 player can compete against the CyberMatch competitor
at a time. The CyberMatch feature adds a level of competition to normally routine practice
sessions.

To activate the CyberMatch opponent:

1. Select the Game you wish to play

2. Press CYBERMATCH button
Select CyberMatch opponent skill level by pressing the CYBERMATCH button
continually (voice command will indicate level):

Level 1 (C1) Professional
Level 2 (C2) Expert
Level 3 (C3) Advanced
Level 4 (C4) Intermediate
Level 5 (C5) Beginner

3. Press START to begin play

When play begins:

The ‘human’ player throws first. After 3 darts are thrown, go to the board to take darts
out and press START to change to the next player (CyberMatch). Watch as the
CyberMatch opponent’s dart scores are registered on the display. After the
CyberMatch opponent completes his round, the board will automatically reset for the
“human” player. Play continues until one player wins. Good luck!

Caring for your Electronic Dartboard

1. Never use metal tipped darts on this dartboard. Metal tipped darts will seriously
damage the circuitry and electronic operation of this dartboard.

2. Do not use excessive force when throwing darts. Throwing darts too hard will

cause frequent tip breakage and cause excess wear on the board.

3. Turn darts clockwise as you pull them from the board. This makes it easier to

remove darts and extends the life of the tips.

4. If you need to replace your AC adapter, use only a genuine Halex AC adapter

(available directly from Halex) for this dartboard. Use of a non-Halex AC adapter
may cause electrical shock, fire, and damage to the electronic circuits and will void
your warranty.

5. Do not spill liquids on the dartboard. Do not use spray cleaners, cleaners that

contain ammonia or other harsh chemicals, as they may cause damage.

Cybermatch
Skill Levels

Halex Electronic Dartboard _ 8

Accessory Storage

Dart holders and spare tip compartments are located on the inside doors. The spare tip
compartments open for easy access. Refer to diagram below.

Game Rules

Your electronic dartboard is loaded with games and options. The rules for each game are
detailed below in the order they appear on the LED display when paging through the
games. An illustration of the LED displays is indicated next to the game description for
your reference. Please note the characters may appear slightly different than illustrated
here.

Dart Holders

Accessory Tray