1x4 HDMI Splitter Over HDBaseT
User Manual
SP14HA10RK
Full 3D Pass-through
Support IR Control
Ultra HD 4K X 2K
100M Extension
INTRODUCTION
•1 x HDMI 1 by 4 Splitter over HDBaseT unit
•1 x 12V DC power supply
•1 x User Manual
•HDMI, HDCP 1.2 and DVI compliant
•Support full 3D pass-through
•Support 4k x 2k high resolution
•Super IR control system, IR transport channel can be forward or backward
per your installation
•Extend to 100M over HDBaseT technology
•Access to Ethernet through LAN ports
•Support CEC bypass
•External and internal EDID settings
FEATURES
PACKAGE CONTENTS
With advanced HDBaseT technology, this 1 x 4 HDMI Splitter allows you
to extend 3D TV over 100M away from the source using cost-effective
Cat5e/6/7 cables. One input HDMI signal can be split to four 8-RJ45
Ethernet signal sink devices simultaneously without any signal loss. It
supports 4K x 2K high resolutions. Furthermore, it allows you to access
to Ethernet through the two LAN ports active connection on the device.
The splitter is with super IR control function. With the optional IR blaster
and receiver, you can control your device from the display.
This 1x4 HDMI Splitter over HDBaseT offers solutions for Home Theater,
AV installation data center, information distribution, conference room
presentation, school and corporate training environments.
PANEL DESCRIPTION
Front Panel
Rear Panel
1 IR OUTPUT
2 HDMI OUTPUT LED
3 RESET BUTTON
4 HDMI INPUT LED
5 POWER SWITCH BUTTON
1 HDMI INPUT
2 HDBaseT OUTPUT
3 LAN PORT
4 POWER SUPPLY INPUT
1
1 2 3 4
2 3 4 5
HDMI Input
HDMI Output
HDMI In HDBase-T Out1 HDBase-T Out2
DC 5V
NETWORK
100Base-T 1 100Base-T 2
HDBase-T Out3 HDBase-T Out4
HDMI
1 to 4
IR
L2 L1 Input Reset
L4 L3
ON
OFF
INSTALLATION
CONNECTION DIAGRAM
DC 5V
08：08
PLAY
DC 5V
DC 5V
HDBase-T 100Base-T
100Base-T
HDMI IN
HDCPLinkModePower
IR-RXIR-TX
DC 5V
DC 5V
HDBase-T 100Base-T
100Base-T
HDMI IN
HDCPLinkModePower
IR-RXIR-TX
Router
HDMI
1 to 4
IR
Output3Output4 Input Power Reset
Output1Output2
HDMI Input
HDMI Output
HDMI In HDBase-T Out1HDBase-T Out2
DC 5V
NETWORK
100Base-T 1 100Base-T 2
HDBase-T Out3HDBase-T Out4
DC 5V
DC 5V
HDBase-T 100Base-T
100Base-T
HDMI IN
HDCPLinkModePower
IR-RXIR-TX
DC 5V
DC 5V
HDBase-T 100Base-T
100Base-T
HDMI IN
HDCPLinkModePower
IR-RXIR-TX
•Connect HDMI input port to the signal source equipment such as DVD
player.
•Connect each HDBaseT output port to the HDMI to Cat5e/6/7 receiver
with Cat5e/6/7 cables to extend the signal up to 100m.
•Connect to IR output with the IR blaster cable (not included in the package)
for IR signal transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
•Connect to the IR receiver cable (not included in the package) for IR
signal reception. Make sure that the remote being used is in direct
line-of-sight of the IR receiver.
•Connect the LAN ports with Cat5e/6/7 cable to your router. The two LAN
ports in this system act as a single network switch. When one of the ports
is connected to the network, the other one will provide a live network
connection.
•Plug the 12V DC power supply into the unit and connect the adaptor to
AC outlet.
Input Port
Output Port
Bandwidth
Output Resolution
Operating Temperature
Deep Color
Chassis
Dimension
Weight
Power Supply
SPECIFICATION
1xHDMI(Female connector)
4xHDBaseT(Cat5e/6/7), 2xLAN Ports
1xIR Channel
10.2Gbps
480i~1080P@50/60,1080P@24/50/60,
VGA~UXGA,4K x2K@30
-15℃~55℃/5°F~131°F
36bit
Metal
276mm(L)x156mm(W)x30mm(H)
2000g
DC 12V
Please read the following safety precautions carefully before you unpack
and install this equipment.
1.Do not expose the unit to rain, moisture or any other dripping liquids. And
keep it away from any wet locations such as fishing tanks, vases.
2.Do not install the unit close to fire or any other heat sources.
3.Keep the unit in dry and ventilated area. Do not install in bookcase,
cabinet or any other confined space.
4.Stop using the unit during thundering or lightening storms.
5.Avoid the power cable to be stepped on or pinched. Position the unit
carefully to avoid damage or accident.
6.Clean the unit only with dry cloth.
7.Only use accessories specified by the manufacturer.
8.Unplug the equipment when unused for a long period of time.
9.Do not try to open any non-serviceable parts. Contact your authorized
servicing center and personnel.
SAFETY PRECAUTIONS
Tel:+86 769 81877098
Fax:+86 769 81877138
Email:chinasales@hailink.cn
Http:www.hailink.cn
Danger Electric
Shock Risk
Keep Dry
Keep Away
from Heat
Loading...