Haier US Appliance Solutions 12WA19 Users Manual

GE
Li
nk
Connected LED bulb
1 LED bulb A19
Soft white Indoor light bulb Dimmable via the app
Control your lighting from anywhere
Remotely operate individuallights or groups
Automate lighting to fit your schedule
Sync with other smart products
Dim or highlight for the perfect setting
+ WINK APP SEAL +
App Store/Google Play logos so they know both versions are available
.Z
igbee-compatible hub required lo connecl
ghling facts
Li
Per bulb
Brightness 800 lumens Estimated yearly energy cost $1.45 Based on 3 hrs/day ,11Ø/kWh. Cost depends on rates and use.
Li
fe 10 years
Based on 3
Li
ght appearance
Warm ←(2700K)
hours/day
Cool
Distributed by Quirky ,Inc. 606 W.28th S
New York ,NY 10001
t.
Made in China.
TWIST IN
1.
Install your GE Link light bulbs
2.
Plug the Link hub or other Zigbee-compatible hub into an AC outlet (sold separately)
3.
Download and launch the Wink app on your mobile device
4.
Follow the instructions on the Wink app to con nect and control your lighting
TURN ON
NEED HELP?
Call GE customer servlce at 1-800-XXX-XXXX
Based on 3 hours use per day ** Compares one 14 watt LED (1100 lumens) which provides nearly the same light output as one 75 watt incandescent (1170 lumens) . Electricity cost savings based on using the bulb for 15 11rþ per kilowatt hour compared to twenty 75 watt incandescent bulbs (rated life 750 hrs)
000 hr rates life at
BALANCE OF WARRANTY :
Limited Warranty : Guaranteed to last 5 years based on rated life at 3 hours per day at 120V. If this bulb does not last fo r 5 years (based on 3 hours per day 17 days per
week) return bulb proof of purchase and your name and address to GE Lighting
Product Service Dept 1975 Noble Road,Cleveland Ohio 44112. GE will replace your bulb. BULB REPLACEMENT IS GE'S SOLE WARRANTY OBLlGATION ,AND INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED. Some states do not allow the exclusion or limited incidental or consequential damages ,so the above excluslon may not apply to you. This warranty gives you specific legal rights and you
rig
may also have other
hts which vary from location to location.
Minimum starting temperature -20o C
Loading...
+ 2 hidden pages