Haier Telecom 1005HG M180 User Manual

Safety Instructions
These instructions are intended for safe and effective use of your phone. Please follow these guidelines. Failure to do so might cause the product to malfunction or even become a potential hazard to your health.
Do not use your mobile phone while driving. Park the car before
Turn off your phone when refueling. Do not use your phone near a gas station, flammable, or chemical substances. Warning! It may explode when exposed to fire.
Do not use your phone during a flight, it is dangerous.
Do not use your phone near medical equipments like pacemaker and hearing aids without requesting permission from the physician or medical staff.
Radio signals may affect the performance of the phone.
Do not touch any exposed parts of the antenna during a call;
otherwise it will affect the call reception and waste battery power.
Do not attempt to disassemble or modify the phone by yourself.
Only authorized personnel should perform this service.
When you connect accessories to your phone, please read the safety guidelines carefully. Do not use unauthorized products or accessories with phone.
Please use only the original accessories or products that are
authorized by our company.
Keep out of children's reach.
- 1 -
Phone Overview (Picture for reference only)
Left Soft key
Answer/Dial key
Description of Keys
Key Description
Left Soft key
Right Soft key
Activates/selects the menu function at the left bottom side of the LCD screen.
Activates/selects the Contacts menu function at the right bottom side of the
Right Soft key
End/Power key
Navigation key
Answer/Dial key
End/Power key
Navigation key
LCD screen.
Dial and answer calls. In standby mode, press to view recently dialed calls.
Ends or reject calls; Power on/Power off; In the menu programming, press to return to standby mode.
In standby mode, press; Left – Calendar Right – Create Message Down – Contact list. Long press up torch on/off
- 2 -
Getting Started
Inserting SIM card and Battery
WARNING!
Keep SIM Card out of children's reach. Any abrasions or bend might easily cause damage. Please take extra care. Make sure the phone is power off when you remove the SIM Card.
Remove the battery cover by sliding it downward.
Insert the SIM Card into the SIM card slot as per figure on
slot.
Place the battery into the phone. Make sure that the charge
pins are in contact with the battery terminals.
Slide the battery cover until it locks into place.
Taking out the battery
Remove the battery cover. Insert your fingernail at the bottom slot of the battery compartment and then pull out the battery.
Charging the Battery
Insert the connector of the charger into the top-left side of the
phone (Note: Ensure that the charger connector is plugged in).
Plug the charger into the AC wall outlet. When the power turns on, “Charging…” will be displayed on the
LCD screen, and the battery indicator will start scrolling. It will
only stop when the battery is fully charged. If a battery is
completely discharged, it may take a few minutes before the
charge indicator appears on the LCD screen.
- 3 -
After charging is completed, disconnect charger from phone
and the socket of the alternating current.
Notice:
When charging, please place the phone in an environment that
has a normal room temperature and good ventilation. It is
recommended to charge the phone in an environment with a
temperature that ranges from 5℃~40℃. Please ensure to use
only the charger offered by the manufacturer. Using
unauthorized charger may cause danger and violate the
authorization of the phone and the guarantee.
When the phone automatically turns off or indicates the alarm
information of power shortage, please charge the battery on
time.
The duration time of the standby and conversation of the
phone offered by manufacturer is based on ideal working
environment. It may vary according to the network condition,
working environment, and application methods.
Warnings!
Do not take the battery out when it is being charged.
To ensure best performance, please use original
accessories.
Using any unauthorized accessories may affect your
mobile phone’s performance. Personal data and settings in your phone and SIM card may be lost when you take out the battery.
Security number
PIN
PIN (Personal Identity Number), usually provided to a SIM Card by the network operator. If you enter the wrong PIN three times in a row, it will be locked. You need to enter your PUK (Personal Unblocking Key) number to
- 4 -
unlock. Please contact your network operator for more details.
PIN2
PIN2 is provided to some SIM. If you enter the wrong PIN for another three times in a row, it will be locked. You need to enter your PUK2 to unlock. This PUK2 may be different from previous PUK. Thus, please contact your network operator for more information.
PUK
PUK (Personal Unblocking Key) is used to unblock the PIN. PUK is provided to a SIM card. If you lose or forget the password, contact your network operator.
Phone code
Protects your phone against unauthorized usage. You can turn on the Phone code for your personal security use.
General Features
Turn on the phone
1. Press and hold (End key) to turn on the phone. The LCD screen will turn on.
2. If SIM card is not properly installed, a warning prompt will
appear on the screen. Press and hold and re-install the SIM card properly.
3. If you have set a phone password, you will be asked to enter your
password.
4. If your SIM card is protected by PIN, the phone will instruct you
to enter the PIN number.
(End key) to turn off,
5. You will be asked to enter the PUK number if SIM card is locked.
6. The phone will search for network automatically once turned on.
Warning! If the phone has found an authorized network operator, the name of the network and signal intensity will be displayed.
- 5 -
Loading...
+ 10 hidden pages