Page 1
Users' Guide
Thanks for purchasing Haier mobile phones, which are a combination of the
essence of high technologies, stylish designs and a plenty of functions.
They are expected to bring endless funs to your life.
Before the use of Haier mobile phones, please read this users' guide and
keep it carefully for further reference.
This guide serves as an operation guide instead of a quality guarantee.
Haier Group Company of Qingdao reserves all the rights to interpret typing
errors in this guide, inconsistency with the latest materials and upgrading of
soft wares and make changes at any time. Such changes will directly be
edited into the new edition of users' guide without further notice.
This users' guide is edited and printed by Haier Group Company of Qingdao.
All rights reserved!
To be held responsible for reprint!
Page 2
1.8 Memory Status ...............................20
1.9My Number .......................................20
2. Messages......................................... 20
2.1 Write Message................................ 20
2.2 Inbox.............................................. 20
2.3 Outbox........................................... 21
2.4 Sent Messages...............................22
2.5 Templates...................................... 23
2.6 MSG Settings................................ 23
2.7 Erase Message.............................. 23
2.8 Memory Status............................... 24
2.9 Voice Mail...................................... 24
3. Call History .................................... 24
3.1 Missed Call.................................... 25
3.2 Received Call ................................25
3.3 Dialled Call.....................................25
3.4 Erase Lists..................................... 25
3.5 Call Timers .................................... 25
4. Profiles............................................ 26 .
Mobile Phone Introductions ................10
CONTENTS
Important Notes.....................................1
FCC SAR..............................................2
1.1 Keypad............................................11
1.2 Idle Mode Screen............................. 12
1.3 Install Battery and UIM Card............. 13
1.4 Charge Battery.................................14
1.5 Switch On / Off ................................15
1.6 Dial a Number..................................16 ....
. Menu Introduction..............................17
1.7 During a Phone Call......................... 16
1. Names...............................................17
1.1 List Contacts ...................................18
1.2 Add New ........................................ 18 .
1.3 Find Name ......................................19
1.4 Multicopy....................................... 19
1.5 Groups ...........................................19
1.6 Erase All Contacts...........................20
1.7 Speed Dial......................................20
Page 3
7.4 Voice Memo....................................31
7.5 Calculator ......................................32
7.6 World Clock................................... 33
7.7 Stop Watch....................................33
7.8 Games...........................................33
8. Haier Feature...................................33
8.1 Menu Items Lock Code....................33
8.2 Incoming Call Guard.......................34
9. TATA Zone.......................................34
9.1 Mobile Web...................................34
9.2 UIM Tools......................................35
10. My Media......................................35
4.1 Normal...........................................26
4.2 Silent ............................................26
4.3 Outdoor .........................................26
4.4 Car ............................................... 27
4.5 Meeting .......................................... 27
5. Settings ............................................27
5.1 Display...........................................28
5.2 Security..........................................28
5.3 Phone Info...................................... 29
6. Call Setup .........................................29
6.1 Answer Call .................................... 29
6.2 Auto Answer....................................29
Input Method...................................35
Maintenances and Repairs ...............36
Troubleshooting..............................39
6.3 Call Waiting....................................29
6.4 Call Forwarding...............................29
6.5 Voice Privacy................................. 29
7. Tools ...............................................30
7.1 Schedule....................................... 30
7.2 To Do List........................................30
7.3 Alarm Clock....................................30
Page 4
Follow the special rules of relative places.
Please switch off your phone where the use
of mobile phones is forbidden or may cause
interference or dangers (for example, in the
hospital).
.
Careful Use
Use your phone normally (near your ears).
Do not touch the wire without reason after
switching off your phone.
Emergency Calls
You can dial emergency calls anytime, even
the PIN/PUK or UIM card is locked. Input
local emergency number and press send key.
The Emergency call number are 100/101/102.
Important notes
Please follow the following rules before you
dangers or make you violate laws
Follow traffic regulations
Do not use the mobile phone without hand-
use the phone. Otherwise, it may result in
free settings while driving. Please stop your
Switch off your phone at filling stations
car before you want to use your phone.
Do not use your phone at filling stations or
the areas with inflammables and explosive
Switch off your phone on the plane
products or chemicals.
Mobile phones will cause interference. Using
mobile phones on the plane is both a danger
Switch off your phone in the hospital
and a violation of laws.
Switch off your phone when you are close to
medical equipments and follow all the
Special provisions
existing provisions.
1
Page 5
2
Page 6
3
Page 7
4
Page 8
5
Page 9
6
Page 10
This device is not intended for use while being worn on the body.
7
Page 11
.
Page 12
While there may be differences between the SAR levels of
various phones and at various positions. they all meet the
government requirement for safe exposure. The FCC has
granted and Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under
the display Grant section of http://www.fcc.gov/oetfccid after
searching on additional information on Specific Absorption
Rates (SAR) can be found on the Cellular
Telecomunications Industry Ass0-ciation (CTIA) web-site at
http://www.wow-com.com.
* In the United States and Canada,the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged
over on e gram of tissue. The standard incorporates a sub-
stantial margin of safety to give additional protection for the
public and to account for any variations in measurements.
9
Page 13
Receiver
Display
Up Key
Names Key
Right Key
i
Power /Hang up Key
Down Key
Keypad
10
Charging connector
Front Open View
OK Key
Antenna
. Mobile phone introductions
Menu Key
Volume Keys Up
Left Key
Send Key
Volume Keys Down
Microphone
Front close picture
Page 14
In idle mode:
Up key: Press this key, you can entry the
Recent Calls list.
1.1 Keypad
Power /hang up key
The red key on top right corner of the keypad
Left key: Press the key to active the Contacts
list.
Right key: Press the key to entry the
is power key. Press and hold the key can
switch on/off the mobile phone. Pressing the
key can end a call during a phone call or
Message menu directly.
reject to answer a phone call. Pressing the
Down key: Press the key to enter the Profiles
directly.
key in the menu can also return to the idle
mode.
i
Enter key
Send key
Pressing the key in idle mode can e
Nter WAP menu. Almost time pressing the
The green key on top left corner of the keypad
is send key. You can dial or answer a call with
key in menu mode can confirm the selected
option or enter the next menu.
Pressing the key in idle mode can enter menu
Left/ right Soft key
the key.
Left/right soft keys are used to carry out the
option directly.
corresponding operation of last line on
Number key
display screen, in accordance with the
Pressing these key can input numbers(idle
mode) or some characters(text editing mode).
In idle mode ,"#" key can use to switching
# key:
Up/down/left/right key
procedure are adopted to acquire different
functions.
The navigation keys can control the cursor
from meeting mode to normal mode.
directions.
11
Page 15
you can make a phone call after the
12
the missed calls and their
has been activated.
Volume side key
You can adjust microphone's volume using
side keys directly during a call. You can
Composed of two parts. The left part indicates
that the mobile phone is duly registered to a
Network
1.2 Idle mode screen
adjust key tone volume in idle mode.
network. The right part shows the signal
strength.
Explanations of icons
Battery icon
Idle mode
Idle mode screen events
Display electric charges of the battery. The
more bars it displays, the more remaining
The mobile phone enters idle mode without
any operations after the phone is switched on.
charges it has.
You can view the current time and date in idle
mode. You can dial a number by pressing
Message
key if you input a telephone number.
number is dialed.
Calling:
The icon is displayed when a new message
arrives. The icon disappears when you read
all the unread messages.
numbers will be shown on the screen in idle
Missed calls:
mode. Press missed call key to view them
one by one.
Alarm clock
That indicates function that the alarm clock
Page 16
Take out the battery
New messages
When a new message arrives, the screen will
prompt it in idle mode. Press navigation key
to read the message and then press key
for options operation. Press the key to
1.3 Install battery and UIM card
return to the idle mode.
Install UIM card
Purchase a UIM card from network operator.
aim the protruding part at the bottom of the
Install the battery
battery at the groove of phone.
UIM card can be used in any a CDMA phone.
Your number and information will not change.
phone and press down the lock until it is
locked.
Make sure to switch off your phone before
Take out the battery
Your phone number and registration
information are stored in your UIM card. Your
push the top part of the battery to the
take out the battery.
Switch off the phone, push up the lock at the
Make the metal face of the UIM card down
and put it conferring the bevel of the card.
bottom of the battery to uplift the top of the
battery and separate with the main machine.
Cover the sheet metal used for fixing and
take out the battery after switch off your
Take out UIM card
install the battery.
Install the battery
13
Page 17
Connect the charger with power supply.
1.4 Charge battery
The scrolling of the electric quantity bar
Insert the plug of the charger into charging
connector of the bottom of the phone.
When the battery level full and stop scroll-
indicates that the phone begins to charge.
ing to displays charging finishes.
Disconnect the charger and the phone after
the charging of the phone. Take out charger
from supply socket.
UIM
CARD
UIM
14
CARD
uncover the sheet metal and take out the
phone.
UIM card.
UIM
UIM
CARD
Installing the UIM card
CARD
Take out the UIM card
install the battery.
Page 18
Input PIN code (supplied by network oper-
setting.
Do not touch the wire in unnecessary
in security, will be shown on the screen to
Press OK, and after a short time, your mo-
replace the number you input.)
bile phone will confirm its correctness and
begin to register on the network. Once the
network name is shown on the screen, you
can dial or answer a call. If no network name
is shown on the screen, you need to register
ator which can be revised. In order to keep it
again.
Input wrong PIN code
If you make a wrong input, you can press rig-
ht soft key to reenter numbers. Three conti-
nuous wrong inputs of PIN code will lock the
UIM card. If this circumstance appears, ple-
ase contact the UIM card suppliers.
Note:
conditions after the phone is turned on.
Notes:
1. Press and hold the buttons of both sides of
the charger after the charging to plug out the
charger.
2. We suggest you to charge the battery fully
when you use the phone for the first time. It
takes about 3 hours for full charging.
3. Do not pull out the plug of the charger duri-
ng the charging to avoid harming of the phone
1.5 Switch on/off
and charger.
Pressing and holding can switch on/off
the phone.
If you have set PIN code, please enter PIN
when switch on your phone.
Input PIN code
You can set protection code (PIN CODE) in
order to prevent random using of your phone
by others. Each time you restart your phone,
the phone will ask you to input PIN code after
15
Page 19
3 press up/down keys of navigation key to
view the telephone numbers and display the
needed names and numbers.
4 press to dial the displayed numbers.
Make an international calls
press country code
input district code (usually no 0 in the front)
press to dial
and telephone number
1.7 During a phone call
Pressing menu key can:
Contact
Messages
Mute
16
Start Recording
Otherwise, it will affect the call quality and
you can only use the function only after the
make the phone consume so more energy.
1.6 Dial a number
input district code and telephone number
network name is shown on the screen.
or mobile phone number, press to dial.
Pressing can end a call.
Endacall
You can press twice to redial the number
Redial a number
you dial last time.
The mobile phone can store 30 latest call lo-
gs (incomings or outgoings). In order to red-
ial one of the numbers, you can do as the
followings:
1 if characters are shown on the screen pres-
ses to return to the idle mode.
2 press to display the latest call list.
Page 20
You can revise, copy, erase, sent
message and voice dialing for
List
1
recorded.
Add a new name to the Contacts
List.
Add
new
Contacts
2
To search according to name.
Find
name
3
Allows you to copy items in the
mobile phone to UIM card or to
Multi-
copy
4
mobile phone memory.
To set names in different groups.
Groups
5
Allows you to erase all items in
mobile phone and UIM card
Erase
all con-
6
memory.
tacts
Your mobile phone can store the most
98 items in its memory for easy/quik dial.
Speed
dial
7
Allows you inquire the capacity
of UIM card and phonebook, incl-
uding used number and total
Memo-
ry stat-
us
8
This service allows you to set
and view the UIM number.
capacity
My Nu-
mber
9
: Only when an effective UIM card is
MENU INTRODUCTIONS
NOTE
inserted can you normally use the menus be-
low. If there is no UIM card in your phone, th-
en enter limited idle mode after the
phone is turned on, the words please insert
a UIM ca-rd will be shown on the screen.
Press the key in idle mode to access the
main menu. The main menu consists of 9
icons. You can select the icons with the
direction keys of navigation key. Select any
one of the icons and press OK to enter
submenu.
youcanalsodirectlypress1to9to
Note:
select a menu in the main menu.
1. Names
Allows you to store the often-used numbers
into UIM card or the mobile phone and at the
same time supply you with search, add group,
store, and erase and memory capacity.
17
Page 21
selected item.
18
allows you send message to
you can copy all UIM card memory
Erase: you can erase
Copy:
entries to phone memory and vice versa.
Contacts
1.1List
You can use this function to search records to
dial directly, and to execute erase, copy, IP
Send message:
When viewing details of submenus, to access
the following functions:
dial, send message, edit and erase operation.
Press key to enter View all function. If
you need to browse phonebook information,
selected number.
input the alignment characters (e.g. a, b),
your mobile phone will attempt to match the
you can revise the recorded name,
Revise:
characters with names in your Phonebook.
number, group, security, email, network and
street address and remarks.
If you search the stored phone numbers, pre-
ferred number display in the screen and you
1.2Add New
can press key to call this number.
With the Add New function, you can add pho-
ne number, email address, street address,
When viewing all submenus, press key
(Option) to access the following functions:
network address and remark.
Your phone can memory 200 phone number
.the UIM card memory be dependent on the
You can search details of the select-
Details:
ed list, such as name, number and remark inf-
ormation (e-mail or fax information). (If the
network service providers.
Press key (select) enter the add function.
There are one name, five numbers, two add-
allows you edit the selected option na-
Edit:
phone number too long, it will be displayed
completely)
resses of email and streets, two network
me, number, group, security and remark me-
ssages (e.g. email or fax).
Page 22
You can change a gro-
Note: in the selecting option of the popup me-
addresses and one remark message in your
nu, through press left soft key to select multi-
phone. There are including one name and a
records, then press left soft key to copy these
selected records in the popup menu.
number in UIM card.
Then to select add in a list into UIM card or
There are six groups (including two redirect-
1.5 Groups
press # key to change input methods
phone.
Notice:
ion group Videlicet group 1and groups 2),
Press 'option' key you may enter the following
during input name.
1.3 Find Name
allows you search the needed
menus:
numbers or other information in the group,
View groups:
To find name required.
1. Input the name or the first character requ-
ired.
press key to manage your groups after
searching.
Change group name:
2. In according to the requirement press up/-
down key to search the needed calls.
1.4. MultiCopy
To customize specific ringers
up name into a found name.
Group ringers:
With the copy function, allows you copy ite-
ms in the mobile phone entries in UIM card
for Incoming Calls.
You can allocate numbers to specific groups
you can copy all of the UIM card
memory to phone memory and vice versa.
All Copy:
for your phone conserved. But you don't allo-
cate numbers for the UIM card recorded.
memory entries to phone memory and vice
versa.
If there are few same name of the recorded in
You can select one or
Copy one by one:
your phone, and allocate either of the groups,
more of the recorded list to copy it.
19
Page 23
call.
Default Speed Dial Number:
1# 1500-Voice Mail;
2# 1590-Fundoo Calling;
3# 121-Customer Care;
4# 197-Directory Assistance.
Allows you inquire the status of the UI-M card
and phonebook, including used number and
1.8Memory status
total memories.
This function allows you to set and view this
1.9My number
UIM card number.
Your mobile phone supports to obtain the cor-
rect Service Centre access number for SMS
2Message
and the correct network settings for information.
Supply you with message services. You can
edit, send, receive and send message.
2.1 Write Message
20
The SMS message length is 160 charact-
Note:
the group information may be losing efficacy
during incoming call. You can use two ways to
prevent it:
1. Erase the same number thereof haven't
allocated group.
2. You can use the same number to record the
same groups.
1.6 Erase all contacts
This feature allows a complete erase of all
contacts either in UIM card memory or Phone
memory; the information thus deleted is un-
recoverable. If you set protection code, before
you clear all the records each time, you need to
input the protection code.
1.7 Speed Dial
Your mobile phone can store more than 98
items in its memory. To use speed dial function
in the idle menu, press the number 2 for two
seconds and the mobile phone will display up
to 99 items of in a speed dial list, select a
number, and then press Send Key to make the
Page 24
Press key insert this quick text into the
send message text interface.
2.1.3 Sent to many
To sent this message to multiuser.
Select
Press key to enter choice number
l
Press key (option) display option as
interface.
following:
Select All
l
Press key to validate and making tick
in all edit interface.
Cancel all
l
Press key to validate then the tick in
all edit interface all be canceled.
Send
l
Press key to confirm the number which
send this message. (After finished, your
phone will ask if you want to store it in outbox.
You can set it in SMS menu.)
Press key return to the previous menu.
2.1.4Save
ers.There s a popup message to prompt the
length is over 160 characters Text is Full.
Allows you write text letter, the number at the
top right corner show character number for
enable input. Press number key to input letter
you need. Press key (option) as following
actions:
You can send a message.
2.1.1 Send
Pressing to select object you want to ins-
ert your SMS message.
Press number key input phone number or pr-
ess key to select phone number from the
Press key confirm the message, and th-
phonebook.
en select to send it.
You can insert templates when composing an
SMS message.
2.1.2 Templates
Press key to select the quick text you
needed.
21
Page 25
22
to call the sender of the selected
key to send the message.
Call back:
message.
You can save the contents of edited to outbox.
2.2Inbox
2.2.1 Inbox
If you want to dial the sender's number, pres-
When you receive a new message, the new
s key and dial directly.
message-prompting icon will be displayed on
Move the selected message to the
Copy:
phone box.
the screen, to view messages in the Inbox.
Press up/down key to scroll and then choose
If you locked the sms ,then
Lock/Unlock:
If you want to save the message in the phone
box, press key to move to the phone box.
either SMS messages to view. While you view
the message press to enter the following
options:
when you select erase all the messages
function in UIM card or phone , this sms won't
be erased.
you can reply the selected message.
If you wand to reply the message, press
key to entry the Edit Interface.
Reply:
To save the number of the
Save address:
Press key to send the message after fini-
shed it.
Ifthereisanyurlinthesms,
To erase the selected message.
Erase:
Connect to URL:
sender.
to forward the selected and edited
message.
If you wand to forward the message, press
Forward:
you can get to the accordance WAP site with
this function.
2.3 Outbox
key to entry the edit interface.
Press key to select send option to enter
text interface.
Input the desired phone number then press
Page 26
edited and only either Chinese or English
display. Press key scroll to the desired
me-ssage and press key to access the
following:
Add new: you can edit text then save it.
Send: you can send the selected text. The
details are as same the 2.1.1 list.
When the quick text cannot be edited, you
can select add and send option.
Press key to display the following option:
Allows you select Auto save or no save option.
If you select 'auto save' option, you can save
the send message or unsend message at the
memory space is not be full state.
With the function allow you to select general
or emergency.
Allow you select turn on or off.,
2.6 MSG settings
2.6.1 Auto save
2.6.2 Priority
You can choose on or off to set the status of
2.6.3 Delivery reports
2.3.1 Outbox
Your mobile phone will store messages in
outbox list. Select a message, press key
to scroll the desired option press to view
the details of the messages and press to
open a message and to enter the following
2.4 Sent Messages
options as the 2.2.1: forward, save address,
copy to phone box and erase.
To save the message from UIM card to the p-
hone box, the saved all messages are displ-
ayed in phone box. Press key to scroll to
the desired message, and press key to
view the details of the messages. Press
key to appear the menu as same as the 2.2.1
following the option: forward, call, save
number and erase.
2.5 Templates
Allows you to set the no. more then 20 quick
texts, 11 texts can not be edited and Chinese
23
or English displays, the other 9 texts can be
Page 27
Dialing the callback number or the
24
to erase the selected voice mail.
2.7.3 Sent Messages
Erase the entire messages in the sent mess-
age folder.
message you sent, if you select turn on, the
information that you have successfully sent
the message is displayed through network.
2.7.4 Delete One by One
Notice: the network determines whither this
Erase the messages one by one.
function is affective or not.
2.7.5 Erase all
To erase messages in the mobile phone and
You can select storage device in which the
2.6.4 Storage Device
2.8 Memory Status
UIM card folder.
sms can be stored in UIM card or phone
device.
Display memory status in detail as total sms
store capacity and free sms store capacity
which in phone device and UIM card device.
You can erase message stored in the inbox,
outbox and phone box folder. To erase the
2.7 Erase message
2.8 Voice mail
The network determines whither this function
entire message or erase the entire message
stored in the phone and UIM card text.
is affective or not.
Press key to view details of the voice mail.
Press key to open the following option
menu:
Call:
Press key to view the following option:
Erase the entire messages in the inbox folder.
2.7.1 Inbox
Erase:
voice mail number.
You can erase the entire messages in the out-
2.7.2 Outbox
box folder.
Page 28
and view this saved number and also to send
the message and dialing to the selected
number.
Please refer to the submenu of the recent
calls.
Details: You can save the number to the
The recent calls submenu
phone or view the details of the phone num-
l
ber.
Send message: you can send a message
l
to the phone number.
Delete: erase the selected text.
Delete All: erase all the dialed call lists.
ll3.4 Erase lists
With the function you can erase all the recor-
ded in the missed calls, received calls and
dialed calls option.
3.5 Call timers
Allows you view the latest call time and to vi-
ew total time of all the dialed outgoing calls
and the incoming calls. Allow you clear the
call-timer.
3 call History
With this function list you can select the recent
calls menu, you can view 30 number in the mi-
ssed, received call, and dialed call menus.
Also, you can view displayed of each call
3.1 Missed Call
times.
With the function, you can view the current mi-
ssed calls (no more than 30 messages). You
can save and view this saved number and also
to send the message and dialing to the select-
ed number.
3.2 Received call
Please refer to the submenu of the recent calls.
This function allows you to preview the 30 mo-
st recent incoming numbers, you can save and
view this saved number and also to send the
message and dialing to the selected number.
3.3 Dialled call
Please refer to the submenu of the recent calls.
This function allows you to preview the 30
most recent outgoing numbers, you can save
25
Page 29
ringtone when outside or driving). Each pro-
files has a factory default, however you can
adjust each profile to suit your requirements.
Press key (function list) in idle mode
The profiles available are:
Select profile: you can the profile to available
are normal.
4.1 Normal
Edit profile: in according to the ambient envir-
onment, you can personal setting the profile
mode.
4.2 Silent
Select profile: if you locate the needing quiet
environment, you can active the silent option
of the profile.
Edit profile: in according to the quiet enviro-
nment, you can personal setting the profile
mode.
Select profile: if you are away from home, ac-
4.3 Outdoor
tive t to available outdoor mode
Edit profile: you can create the personal set-
26
3.5.1 Last call
Your phone displays the last call times.
Display the time used by the last call.
3.5.2 Received call
Display the time used by the last call.
3.5.3 Dialed calls
Display total time used by all outgoing calls
3.5.4 Total call duration
since the timer was reset.
Showing total time of duration all incoming calls
3.5.5 Timer reset
and outgoing calls.
This function clears all call history and resets
the history timers
4 Profiles
The profiles function provides a quick and
convenient way to reset your mobile phone
setting for a particular environment (e.g. to
set your mobile to not ring when you are in a
meeting, or increase the volume of the
Page 30
number setting under the phonebook groups
setting state.
ting under outdoor menu. Volume of the
default setting is the maximum ring volume.
Allow you to setting the ringer format when a
Message Alerts
Select profile: if you are driving, you can set
4.4 Car
new sms incoming: ringer, vibration and
silence.
to the car mode immediately.
Edit profile: in according to the outside envi-
You can select different new SMS ringer for-
SMS ringer
ronment, you can personal setting the profile
mode.
mat.
Volume
Select profile: if you hold a meeting, you can
4.5 Meeting
Allow you to adjust the volume of the ringer,
microphone, and key tone.
set to a meeting mode of the profile.
Edit profile: in according to the meeting envi-
Allow you to select the key tone mode: normal
Key tone
ronment, you can personal setting the profile
mode. The default setting is the vibrate mode.
alerts
(the prolonged sound and the brevi sound are
fixed.), long (when you are pressing the key,
the key tone is until un-pressing).
Personal setting as following:
The incoming call ringer modes have: ringer,
Call mode:
You can on or off the alerts mode (service ch-
ange, minute beep, call connect, dropped call,
fail on outgoing, power on/ off tone, low battery
Allows you set the incoming call ringer for no
Call ringer
alert!)
group's number. The ringer of the group's
Alerts
vibration, vibration then ring, simultaneous,
and silence mode.
27
Page 31
the PIN. If the incorrect PIN is entered 10 ti-
mes consecutively the UIM card will be
discarded as useless.
You can edit the banner in idle
In addition to the UIM card security function,
5.2.1 Lock phone
you can set up your mobile phone to request
that the phone PIN number is required and
set whether use or no.
allow you to select the wall-
You can revise the phone PIN number
5.2.2 Change code
you can select different
Allows you restore your phone to the factory
5.2.3 Reset to default
allow you to select key-
estate.
You can set up your mobile phone to request
that the UIM card PIN number is required wh-
5.2.4 PIN management
Allows you set the displ-
you can adjust LCD contrast
en your mobile phone is turned on. You must
enter the UIM lock password to use your mo-
If you set PIN number, you must
bile phone.
Enable PIN:
input the PIN number and the screen will ind-
28
icate 'enter PIN'.
5. Settings
5.1 Display
5.1.1Banner:
5.1.2Backlight:
mode.
This function allows you to set up the timer
and, as well as, adjust the backlight settings.
5.1.3 Screens:.5.1.4 Menu style:
paper pictures
style of the function.
5.1.5 Theme colors
pad background light color.
5.1.6 Language
5.1.7 Contrast
ayed languages.
5.2 Security
from 0~9 level.
If the incorrect PIN1or PIN2 is entered three
times consecutively, the UIM card will be
locked and a PUK1 or PUK2 number
(Personal Unlock Key) is required to reset
Page 32
the calling will auto
Close the auto answer function.
with the function
after selecting the function.
6.2 Auto answer
6.2.1 Off:
If you close the security option,
Disable PIN:
you must entry the PIN number and the
screen will indicate 'are closed'.
answer when the incoming call display after 3
seconds.
6.2.2 After 3 seconds:
allows you change PIN
Change PIN:
number.(changing under the PIN activated
mode)
you can auto answer call and record during
calling.
6.2.3 Answering Machine:
5.3 Phone info.
Allows you search software version of the
mobile phone when the software be
Activate and deactivate the call waiting
function.
6.3 Call waiting
upgraded.
6.4 Call forwarding
6 Call setup
The function supplies you with sets related to
Open or close the call forwarding function. In
according to the requirements to select
6.1 Answer call
calls.
different call record type.
6.5 Voice privacy
Flip on can answer a call
6.1.1 Flip open:
without pressing answering key after
The function allows you set the voice privacy
mode in enhanced.
: press and hold the keys ex-
6.1.2 Any key
selecting the function.
cept power key and side key can answer a
press to answer a call
6.1.3 Send only:
call after selecting the function.
29
Page 33
key to select one record and then press-
Key to enter the menu item. Enter:
30
7.1.2 List All
Entering the schedule, you can see all the re-
7 Tools
7.1 Schedule
cords.(according to the time sequence) Press
This function only can be used when the
system time has been set.
observing the content in the record. Erase:
deleting the current record. If erase all the
When you entering the schedule interface,
there will appear a calendar. The first row of
the calendar shows the year and the month;
records, the interface will return to the calen-
dar interface.
the second row of the calendar shows days
from Sunday to Saturday in order; in the
7.1.3 Erase All
middle is the calendar watch; the number in
7.2 Todolist
All records can be erased.
the small black square is the current
selective date; the row next to the last shows
This function can do the searching process
(this part is consisted of three things things of
remain to be done, things of have been done,
7.1.1 Add New
the selective month and day in lunar calendar.
You can add leading information to the
all things), add new process (this part can be
set priority), and batch deletion.
calendar. Inputting the information ( 36
English letters) to the phone and then add
7.3 Alarm Clock
This function can be used only the system ti-
alarm clock time and ring tone, at last press
the entering key. This process is done. If the
me has been set.
installment is well done, there will appear a
This function supports three alarm clocks an-
clew save success ; otherwise the clew
d a quick speed alarm clock.
will be failure .
Page 34
(the starting and the stopping time of the rec-
Add: when record a new item, the interf-
ord and the length of the record)
l
Erase: erase the selective records.
ace shows the remaining times of the record.
l
Erase All: erase all the records that
recorded under the non-call condition.
l
7.4.2 Voice List
This function allows audio record during call-
ing. The mobile can save 10 records. Each
record can last 30 seconds at best. If the rec-
ord time is beyond 30 seconds, the record
process will stop automatically.
Play: the item which recorded under the
Supportive operations:
non-call condition, the play interface shows
the remaining times of the record.
l
View: view the information of the records
(the starting and the stopping time of the
l
Erase: erase the selective records.
record and the length of the record)
l
;
Erase All: erase all the records which
l
Entering the alarm clock setup, press key
to choose between turn on and turn
off . Press different times to confirm
different tasks, at last set the alarm tone.
Press left soft key to clew success save .
The quick speed alarm clock can set different
alarm times after 30 minutes , after
one hour , after three hours . The alarm
cannot be used when the mobile is power off.
7.4 Voice Memo
7.4.1 Memo List
The record function can be used under the
Play: play the item that recorded under
non-call condition. This mobile can save 10
record items at best. Each record can last 30
seconds at best. If the record time is beyond
30 seconds, the record process will stop
automatically.
Supportive operations:
l
the non-call condition the play interface sho-
View: view the information of the records
ws the remaining times of the record.
l
31
Page 35
32
non-call condition. Three records can be
recorded while making a call.
savedatbest,whichusedasanswersofthe
Methods of add a record while making a
automatic record machine. Each record
should last 30 seconds at best. If the record
call
1. While making a call, press the record key
time is beyond 30 seconds, the recording
process will stop automatically.
Supportive operations:
in order to record a new item. The interface
of the mobile shows recording . Press
the record key again to stop recording.
Record: record the items under the non-
call condition, the record interface shows the
l
2. While you make a call press the left soft key
to select starting record on the sub-menu.
Stop: stop recording under the non-call
remaining time.
l
Then begin recording new item and the inter-
face shows recording . Meanwhile re-
Play: if select one record, it will play the
condition.
record automatically.
l
cording changed to stop recording on
the sub-menu., use stop recording to stop
this process.
This function includes four calculation func-
tions, videlicet addition (+), subtraction (-),
machine, the machine will record the
multiplication ( ), and division ( ).
message. The length of the message should
be controlled within 30 seconds. If the record
7.5 Calculator
3. Getting reply from the automatic record
Press number key to input the number. If you
want to cancel this calculation process,
time exceeds 30 seconds, the machine will
stop automatically.
please press key.
Notice: for the limited degree of accuracy,
This function supports recording under the
7.4.3 Answering Record
Page 36
If you have saved the former game record,
you can choose start game or resume game ,
results made by this calculator only used as
reference.
7.6 World Clock
or select game to start it again.
1. Start Game
You can look over different times of different
2. Resume Game
3. Select Games
cities in the world.
Press key to look over the time.
4. Instructions
Using up (2), down (4), left (4), right (6),
those four keys to move the red square to
select the chess. If theAchessman jumps
Press key to save the current city time for
the next search in convenience.
Press key to exit this menu.
7.7 Stop watch
over the B chessman, the former chess eats
Entering the stopwatch interface, press
over the latter one. Only chess can jump in
one process. At last only chess left on the
key to start timing and press key to record
one item. 9 items can be saved at best. Press
chessboard is winning.
8 Haier Feature
key to stop timing.
Press key to look over the former records.
8.1 Menu items Lock Code
Timing again: press key to clear the time.
You can protect important information in the
mobile from being seen by others or deleting
When start timing again, the former record
will be erased.
accidentally. The information includes
message, telephone book, call record, voice
memo, alarm clock and schedule. You can set
Notice: For the limited degree of accuracy,
this function only used for reference.
7.8 Games
Kong Ming
33
Page 37
list. After using the call guard function,
inputting the numbers and then the mobile
will only answer the numbers on the white list
automatically.
8.2.3 Guard Setting
This function can unlock the black list, white
list and close the two lists. Those three things
are not available in the same time; only one
thing can be used in one time.
This function is a kind of network value added
service of CDMA. Press enter key to come
9 TataZone
into the sub-menu of this function under the
alert condition.
Press key allows entering the mobile web
9.1 Mobile Web
in the idle mode. When the mobile connecting
to the Internet the mobile interface will show
the homepage. You can press down key,
enter key or left and right key to scan the
34
the password for those functions at one time
or set the password only for some of the
functions.
If you use the password for some of the
functions, you should input the correct
password when you using those functions,
otherwise you do not have the right to use
those functions.
This kind of function supplies a simple way to
8.2 Incoming Call Guard
protect you from the annoying telephone.
Notice: only your mobile can show the
incoming numbers, can this function be used.
8.2.1 Black List
There are ten groups of numbers on the black
list. After using the call guard function,
inputting the numbers and then the mobile
will reject the numbers on the black list
automatically.
There are ten groups of numbers on the white
8.2.2 White List
Page 38
There are 5 input methods:
1.Number (123): to provide input number.
every time when you log on the
page. Press key to end the operation.
Internet, the interface will show the page of
Notice:
2.Character (abc/ABC): Press the demanded
number key, one times press to input a
character, twice press quickly to display the
second character, by analogy to finished the
the former time.
Only your R-UIM card supports this kind of
function, you can use it. Different UIM cards
9.2 UIM Tools
text.
3.Zien:Allows you use eZi English input
method .
are vary in menu name and content.
The data of pictures and ringing tones
10 My Media
4.ZiEn: Allows you use eZi English input
downloaded by WAP is saved under this list.
method, The first character of every word is
capital.
The downloading pictures and ringing tones
can be used as background picture under
Note: If you press the key , you find nothing but
a " "display at last line on screen. Don't warry
alert condition and incoming ringing tone.
about this, it's just a page down mark. When
you press the "down key" the input character
will display at the last line on screen.
Input method
This mobile phone used the eZi input method.
When using your mobile phone there will be
This is a copy and paster function for your
input method.
5.
many times that you will need to input text
e.g. sending messages, entering names into
The copy step described as:When reaching
at a readable txt page, you can switching to
35
the Phonebook, editing the greetings
message, editing Browser settings, etc.
Page 39
36
of the symbols cannot be showed in one scr-
pasting mode using "#" key, there will be a
een page, press up/down key to turn pages.
cursor on the text.Move to the strat point
,press "1" and continue move the cursor to
Maintenances and repairs
Your mobile is in fine designing and
the end point you wanted,at this time, the
choiced text will display as a particular color,
elaborate manufacture. Please use your
phone carefully and maintain it. The
following suggestions can help you extend
press "2" then end copy process.
The paste step described as:When reaching
at a writeable text page such as writing sms
Put your phone and the fittings in the place
the useful life of your phone:
status,pressing "#".
Mode switch
Keep your phone dry. Mineral substance
where children cannot reach.
#
Under the input mode press key enter to
switch the input mode.
contained in rain, moisture and liquid will
Notice: When you are in the Chinese input
erode the electric circuit of your phone.
mode, editor will save the last input method
and dusty place.
Do not put your phone at dirty, disordered
Do not use or store your phone in high te-
mperature place. High temperature will sho-
mode, when you enter editor your phone will
auto select the last input mode.
Under EN input mode, press 1 you can
Input symbol
rten the life of electronic components, dam-
age the phone and distort or dissolve the pl-
switch to the symbol mode. You can press
number left of symbol, then the phone will
astic parts of the phone.
auto return the last mode. If the total number
Page 40
all guarantees null and void.
Haier phone can use the following fittings:
To activate earphone mode.
To match the volume of earphone with that of
If you connect the earphone with the phone:
Earphones (nonstandard collocation)
Increase or decrease the volume through up
mobile phone.
and down side key during call.
If you plug out the earphone from the phone,
the phone will return to normal mode
automatically.
Charger:
Insert charger, the background light is on and
send out prompting sound. The phone enters
into charging mode automatically.
Plug out the charger, the background light is
on and the phone returns to normal mode
automatically.
You can charger a battery both in on/off mode.
Connect the power source with one side of
Table mode charger:
Do not use or store your phone in low tem-
perature place. When it comes back to nor-
mal temperature, the moisture will coagulate
in the phone and cause the damages of circ-
Do not open your phone by yourself, as
uit board.
non-professional disposal may damage the
Please avoid throwing; knocking and shak-
phone.
ing your phone, improper external frce may
Do not use chemical solvents or detergent
result in the damage of inner crcuit.
to clean your phone. Please use cotton mat-
erial with water or soap water to clean the
Please use or purchase Haier fittings.
outer shell of mobile phone.
Please contact professional maintenance
personnel to repair your phone if your phone
and its fittings are in trouble.
Use the batteries and fittings manufactured
by Haier Company. The use of other fittings
may cause dangerous accidents and make
37
Page 41
to the mobile phone.
* Do not allow metal objects (such as keys in
your pocket) to short circuit the battery con-
tacts.
* Do not deform or open the battery.
38
* Avoid exposure to moisture or fire.
the original traveling charger. Inserting it into
span of table mode charger that it connects
with the plug of mobile phone, the green light
of the indicator light is on; put battery into ta-
ble mode charger, the red light of indicator
light is on, it is charging normal; after definite
time the green light is on show the battery co-
mpletely.
Batteries
* Use the batteries specified by the manufact-
ures. The standard collocation of the phone is
600mAh lithium-polymer battery whose wai-
ting time is 70-90 hrs and call time is 160-180
hrs, The 880mAh lithium-polymer battery wh-
ose waiting time is 120-140 hrs and call time
is 190-210 hrs (waiting time and call time will
vary with the network environments). The use
of other chargers may cause dangerous acc-
idents and make all guarantees null and void.
You will mobile phone responsible for main-
tain when damages are induce by applying
other batteries specified by the manufactures
Page 42
Hang up and
ing your phone
here
ce nearby.
redial.
1. Imperfect functi-
on line of network
Echo or
noise
operator.
2. Imperfect local
Try to avoid us-
4.Electromagnetic
interference sour-
line in some calling
areas.
1. Waiting time an-
Waiting ti-
Power off in we-
ek signal place.
d network's oper-
ator system is co-
me beco-
nnected. The sa-
mes short.
me mobile phone
is used in different
Make a call at a
fixed place as
possible as you
networks.
2. The user's mov-
ing make the freq-
uent switchover
can.
3.Battery waste.
between areas.
Change battery.
Battery function
will fall after a pe-
riod of using.
Trouble shooting
If there are troubles when using your phone,
please refer to the following table. If there are
still questions, please dial Haier service tele-
phone to solve.
Means of settle-
ment
Trouble reasons
Abnor-
mal cir-
cumst-
Please move near
1.Using mobile ph-
Bad si-
ance
the window if you
are in a building,
one in bad signal
area, such as near
gnals
or drop
and move to a wild
place if the signal
is weak.
the high building or
in the basement.
the line
Trytoavoid
2. In call rush hou-
r. The line is stuff-
make a call.
ed so you cannot
Ask network oper-
ator supply servic-
3 keep away from
base station of ne-
e map.
twork operator.
39
Page 43
Check the se-
40
-
rvice area of
network oper-
ator.
Move near the
window or se-
lect another
service netw-
ork
Contact netw-
ork operator.
Power off fix-
Dial later
ed dial or call
restriction
Contact net-
work operator
Be not in service
area
No netw-
ork servi-
ce
Move to a nice
signal area or
power off tem-
4. The mobile pho-
ne will launch con-
tinuously and sea-
Weak signal
porarily.
rch base station
when not receive
signals. Mass con-
suming of electric
Cannot
quantity shorten
the waiting time.
The service is not
available
send me-
ssages
Charger the bat-
tery or install the
battery correctly.
1. No battery or the
battery is not inst-
The pho-
ne cannot
The fixed dial or
call restrictions
The tele-1.
phone c-
Press the power
alled well.
2. Time of pressing
be started
has been set
annot be
keyabout2sec-
onds to power on.
the power key is
not long enough.
3. Not choose se-
2. Be in peak hours
of using network
dialed
out
Send to network
operator for
examination.
1. Damaged UIM
card
The UIM
card is n-
nd the phone nu-
mber
Reinsert UIM
2. UIM card is not
ot availa-
ble
Input wrong PIN
Wrong
card correctly.
installed well
code three times
PIN code
Wipe the touchi-
ng point with a
3. Unclean UIM
card contact.
clean cloth.
Page 44
Move to outdo-
ors or the plac-
es with good
1. You are in weak
signal area
2. You are in unst-
Displayi-
ng calling
ending or
Change a new
battery or char-
ger
signal.
3. You are in bad
quality signal area
eady signal area
cannot
startac-
all or ret-
urn to idle
Adjust charging
environment
mode
Check if the ch-
arger contact
directly
has connected
well.
Wait for a mom-
ent or pull out
the plug and try
Contact network
again.
operator.
Charger the
battery.
Install the battery
correctly and re-
start the phone.
1. The battery or
charger has been
The batt-
ery can-
2.The phone temp-
erature is below
5 orabove40 .
damaged.
not be
charged
or do not
display
3. Bad contact
the char-
ging
4. Not enough cha-
rger last time
The network oper-
ator does not sup-
Some fu-
nctions
ply this function.
1. No electrical vo-
Power off
cannot be
set
2. Bad contact be-
ltage
automat-
ically
tween battery and
the phone
41
Loading...