Introduction
Thank you for your choosing the new tablet pc.
This guide serves to enable users to get to know and
familiar with our product as soon as possible. Here we
have made a brief introduction to the key layout and
definitions in figures and words.
Disclaimer: These specifications are for reference
only and shall not constitute any commitment in any
way. Concerning the product improvement, we shall
reserve the right to change the product specifications
without further notice.
1.This production is suitable for use in non-tropic areas
below 2,000 meters, and the mark in the nameplate
indicates the product is suitable for use in non-tropic
areas.
2. Prevent the tablet pc from falling to the ground or
being strongly impacted otherwise.
3. Do not use it in the long term in any environment
where the air is too cold, too hot (<35℃), too humid or with
too much dust. Do not expose the tablet pc to sunlight.
4. Avoid using it in the strong magnetic and strong static
environment as much as possible.
5. Once any water or other liquid splashes onto the
tablet pc, close it immediately and do not use it until it
dries out.
6. Do not clean the tablet pc with any detergent
containing chemical element or other liquid to avoid
causing damage due to corrosion and becoming damp. If
cleaning is really necessary, clean it with dry soft cloth
tissue paper.
7. Our company shall not bear any and all
responsibilities for loss or deletion of material inside the
machine caused due to abnormal software and hardware
operation, maintenance or any other accident.
8. Please back up your important material at any time to
avoid loss.
9. Please do not disassemble the tablet pc by yourself;
otherwise you will lose the right to warranty.
10. Replacement with incorrect type batteries may
cause explosion. Make sure to use original batteries.
Detach the tablet by lifting one corner to release it from
the keyboard to function as a tablet.
Introduction to Desktop
1. Windows 8.1 start image: On the start screen, you
can see many programs fixed in the image. These
application programs are displayed in the form of
“magnet”. As long as you click them, you can easily visit
them.
You need to log on your Microsoft account before the
application program completely runs.
In the start screen, slide upward
from the bottom of the screen to
visit all application program
(APPS) interfaces.
3.Introduction to app Interface
Besides the application programs already fixed on
the start screen, you can also start other application
programs in all application programs, such as other
software application programs attached to the tablet
pc.
If you want to fix more application programs on the
start interface, see the operation in the figure below, (1)
lightly touch, press and hold the application program
magnet for about one second and then let go, and
select (2) to fix to the start screen.
Conversely, if you want to cancel or delete a certain
application in the start screen, (1) lightly touch, press
and hold the application program magnet for about one
second and then let it go and run, and select (2)
attribute column to cancel the programs such as
fixation and deletion and then it can be completed.
external screen or printer with the device connected to
the tablet pc.
Can let you set up the table pc.
Settings
Search menu Share menu
Device Menu Set up Menu
5.Dual-Screen Application
On my computer in (Figure 1), slide it inward from the
left side of the screen, drag it and hold. Let go when
seeing double interfaces appear.
In (Figure 2), press the partition button on the middle
partition line and drag right and left to partition the
display proportion of the double screens.
Method for quick setup:
Click the “Setup” button in “Charm” setup, and select
“Change computer setup”. Select “User” on the left and
click “Create local account” in “Your account” on the
right side. After inputting the password of Complete
Windows Live Id Account, input username, password,
confirm password and password prompt.
Your device supports most of the common audio and
video file formats, except a few special formats. We
suggest that you download a third-party player to play
those exceptional files.
Important Statements
All contents and services obtained through your device
shall belong to a third party under the protection of
copyright, patent, trademark or other intellectual
properties, and shall be used for your personal noncommercial purposes only. You are not allowed to use any
content or service in any way without the authorization of
the content or service provider.
In no case shall we be held liable for any direct, indirect
or accidental loss or damage caused by your accessing
any content, service, information or third-party software
through your device.
Third-party services are subject to change, deletion or
may stop without prior notice. We shall not imply or
assure that all services and contents will be kept available
at all time.
We shall not be responsible for providing any related
customer service for any third-party service or content.
Please refer your questions and service requests directly
to the relevant content or service provider.
Please remember to backup the data when using your
device. We shall not be held liable for any personal data
loss or damage caused by software or hardware
misoperation, product repair, battery replacement or any
other unexpected situations, or for any other indirect loss
arising thereof. Any misunderstandings in relation to this
Manual shall be beyond our control. Consequently, we
shall not bear any liability for any accidental loss caused
by the use of this Manual or for any third-party claim
caused by the use of your device.
Your pad is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions can help you comply with the terms
of repair kits, to extend the life of your pad.
1) Place the mobile pad and its parts and components
out of reach of small children.
2) Keep the pad dry. Rain, humidity and all types of
liquids which contain minerals will corrode electronic
circuits.
3) Don’t touch the pad with wet hands when charging, it
will cause electric shock or damage the pad.
4) Avoid placing the device in high temperature
environment. High temperatures will shorten the life of
electronic devices, damage batteries, and warp or melt
certain plastics. Avoid placing the device in significantly
low temperature environments. When the temperature
rises, the pad will produce water vapor that may damage
electronic circuit.
5) Avoid placing the pad in dusty or dirty places,
otherwise parts may be damaged.
6) To avoid damage to the pad, do not place it near a lit
cigarette, an open flame or any other heat source.
7) Do not open the device, non-professional approach
will cause damage to the pad.
8) Do not shake the pad or throw it from high places.
handling the pad roughly can damage internal circuit
boards.
9) Do not paint the pad, as paint will block headphones,
microphones or other removable parts, and cause the
10) Use clean, soft, dry cloth to clean the camera and
light sensor lenses. Do not use of harmful chemicals,
cleaning agents or cleaning fluids to clean the pad.
11) If mobile pad, battery, charger, or mobile pad
accessories are defective, send to the nearest qualified
service center for inspection.
12) If necessary, Service Centre staff will assist you
and will arrange for pad repairs.
13) To prevent possible hearing damage, do not listen
at high volume levels for long periods
Caution:
Use the Mobile pad in an environment with temperature
between -5℃ and 35℃ , For the following equipment:
Mobile pad is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
The earphones should be used carefully.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
The product shall only be connected to a USB interface
of version USB 2.0 or higher. The connection to a power
USB is prohibited.
Adapter shall be installed near the equipment and shall
be easily accessible.
The device complies with RF specifications when the
device used at 0 mm form your body.
Risk of explosion if battery Is replaced by an incorrect
type.
Dispose of used batteries according to the instructions.
The plug considered a disconnect device of adapter.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
2. Information to user:
Any Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
This pad meets the government's requirements for
exposure to radio waves. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons
regardless of age or health.
FCC RF Exposure Information and Statement The SAR
limit of USA (FCC) is 1.6 W/kg averaged over one gram of
tissue. Device types: Y11B (FCC ID: 2ACZD-Y11B) has
also been tested against this SAR limit. SAR information
on this and other pad can be viewed on-line at
http://www.fcc.gov/oet/ea/fccid/. Please use the device
FCC ID number for search. This device was tested for
typical body-worn operations with the back of the handset
kept 5mm from the body. To maintain compliance with
FCC RF exposure requirements, use accessories that
maintain a 1.5cm separation distance between the user's
body. The use of belt clips, holsters and similar
accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy
these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
22
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.