Fuzzy Computerized Automatic
Washing Machine
This manual is for
XQS60-78H
User's manual
User's manual
Please read this manual
carefully before using.
Retain it for future reference.
W
0030804888A
CONTENTS
Names of the parts.................................................................1
Safety precautions .................................................................2
Installation and adjustment ....................................................4
Install the water inlet hose.......................................................6
Preparation before washing ...................................................8
Put in the laundries .................................................................9
Put in the detergent ................................................................9
Use the operation buttons .......................................................10
Close the top lid .......................................................................14
Finish washing .........................................................................14
Disposal after washing .............................................................15
Trouble shooting Answer to question......................................16
Packing list Specification........................................................17
Description of heating function
1. Heating function can be selected for "STANDARD", "QUICK", "JEAN"
and " POSTHASTE" programs, but it's unavailable for
"RINSE "process.
2. If heating function is selected, for water levels
water reaches the set level, and begins to wash when the set temperature is
reached; for water levels
continues water supply and gently agitates while heating to the set temperature,
then it begins STANDARD washing; for water levels above
water reaching level
until level
then it begins to wash while water supply is resuming, (the hot water
temperature then is good for detergent active enzyme function and for the
clothes to be in an optimum detergent concentration with a good washing effect.
The subsequent washing while water supply can facilitate dirt flushing and
removing), water supply stops when reaching the set level, then it continues to
wash STANDARDly. For high water levels, only the water amount below level
"6" can be heated to the set temperature, then it washes and supplements water
to the set level
3. This washing machine provides 3 temperature selections of 20 , 30 and
40 .
"6", water supply stops and it continues heating to the set temperature,
"3"-"6", it begins to heat upon water reaching level "2", it
"2", it begins to heat, meanwhile water supply continues
"1"or "2", it begins to heat after
"6", the cycle is: after
Names of the parts
Adjustable leg film
Top lid handle
Round cover
Attachment block
(2 pieces)
Pulsator
Water inlet valve
Water absorption
cushion
Handle
Power cord
Drain hose
Back cover
Top lid component
Inner cover component
Detergent box
liquid whitener inlet
Control panel
Outer tub cover
Balance ring
Lint Filter
Inner tub
Front control board
Cabinet
Base frame
Adjustable leg
Fixed leg (3 pieces)
Meaning and description of the symbols
Warning sign
Forbidden sign
Contents marked with that symbol are related to the safety
of the product and the personal safety of the users. Please
operate in strict conformity to the contents, otherwise it may
cause damage of the machine or injure the personal safety
of the user.
Contents marked with that symbol are actions forbidden to
perform. Performing of those actions may result in damage
of the machine or injure the personal safety of the user.
Safety precautions
Please plug the plug on special 220V AC receptacle.
Be sure to use single-phase three pins receptacle.
Ensure the earthing prong of the power receptacle is
earthed reliably. Use leakage protector if possible.
Do not bend, stretch, twist, bind the power cord by force, or reform it.
Do not press or clamp it with heavy items. If the power cord and power
plug are bad, or the receptacle is loose, be sure to have it replaced by
the technicians of our special shop or our agent, or the after-sales service
department to avoid any risk. Keep the prong of the power plug clean. If
dust is found on the power plug, please wipe it off with dry cloth.
In case the washing machine is installed on ground
with carpet, be careful not to block the ventilation hole
with carpet.
Soft items
The ventilation
holes at the bottom
In normal usage of the washing machine, the power
plug shall be ready to be pulled or plugged with hang.
Be sure to pull the plug off and close the water faucet
when occurring power failure, delivering the maching,
setting the machine idle or cleaning the machine, do
not plug or pull the power plug with wet hand.
Do not use water with temperature higher than 50
Do not put the machine at damp place like the
bathroom. Never wash it with water. Do not
put wet laundries on the front control panel board.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose, do not use
the plug any more.
.
Do not wash water-proof laundry like the raincoat,
bike-covers, down textiles etc. To avoid abnormal
vibrations in spinning and damages to the laundries-
Safety precautions
Do not put hand into the rotating tub. It is dangerous
even if the rotation speed is slow. Take special care of
the children. Keep children away from the washing
machine to avoid them climbing on.
Do not put any hot or heavy items (such as the
kettle with hot water) on the washing machine.
The handicapped or children without care shall not
use the machine.
Do not decompose, repair or alter the machine by
yourself.
Do not wash laundry with volatile materials
(such as thinner, petrol etc.).
Benzene
Keep the machine away from direct sunlight and
heat source like the heater.
Please keep the lint filter in good condition, and
install it to proper position during washing. If the
lint filter is lost or damaged, please contact the local
after-sales service department of our company.
The front cover of lint filter
dismantle
The back cover of lint filter
install
To protect your laundries and washing machine,
please take out all of the coins, buttons, sand, hairpin
and other foreign materials before washing.
Please check if the water faucet is open, and if the
connection of the water inlet pipe is proper.
It is suggested to use foamless washing powder.
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the inner cover component
1.Open the top lid of the washing machine.
2.Put the inner cover component on the outer tub cover, aiming the inner cover
shaft to the installation hole of the corresponding outer tub cover shaft groove.
3.Firstly insert the inner cover shaft of one side into the corresponding outer tub
cover shaft groove, then push the another inner cover shaft into the corresponding outer
tub cover shaft groove. Please install to designated position to guarantee there are no
dropping or abnormal sound in opening and closing of the inner cover, and the operation
shall be smooth. Do not dismount the inner cover component after washing.
Outer tub cover
Outer tub cover shaft groove
Inner cover shaft
Left hand
Right hand
Inner cover component
Figure 1
Figure 2
Install the bottom plate
After opening the package, please lean the washing machine gently down on soft items (like
towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with eight screws
by a cross screw driver, then lift the machine up gently. See to the figure:
Front
Back
Bottom plate
Screw
Soft items
Adjust the Installation position
The largest allowable slope of the shank base of the machine is 1 . The slanting or rough ground will result in
unstable running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is
horizontal.
Adjust the adjustable leg:
1 .To twist the adjustable leg, please first lift up the
side of the leg slightly, loosen the adjustable nut,
and twist the leg.
2 . After adjustment, fasten the nut.
High
FastenLoosen
Low
The adjustable nut
The adjustable feet
Usage the drain hose
The drainage shall be smooth with the drain hose.
The height of the drain hose shall be less than
10cm, or the drainage will not be smooth, and cost
such long time that the machine may stop at mid
way.
Do not step on or press the drain hose.
<10cm
If the drain hose is too long, cut it at mid point. To make
smooth drainage, cut the front end of the hose slantingly.
If extra drain hose is needed, please make separate
purchase. The inner diameter of the extra hose shall
not less than 30mm, and the length shall not exceed
1.5m.
> 30mm
<1.5m
If the extra hose is too long, cut
it either at A or at B point.
B
A
A
Install the water inlet hose
Confirm the water faucet
water faucet, suitable water faucet, not suitable
The exit end face of the faucet
It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage.
Connection between the water inlet hose jointer
and the water faucet
1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the
water inlet hose component. See to Figure 1.
2 Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet.
See to Figure 2. (If the faucet is too large and the jointer can not be set on the water faucet, please loosen
the four screws and take out the bushing in the jointer. The front end of the faucet must be smooth,
otherwise it may leak water. See to Figure 3.)
water inlet hose jointer
Slider
Screw
Lock level
water inlet hose
Screw knife
Figure 1
Sign plate
Figure 2
3.Fasten the four screws evenly. See to Figure 4.
4 Take off the nameplate. Twist the fastening nut as per the indication of the figure
to seal up the exit end face of the faucet. See to Figure 5.
remark: Before installation, the threading is 4mmabove the upper surface of the nut.
After installation, the threading is 2mm above the upper surface of the nut..(see to figure 6)
About 4mm before twisting
About less than 2mm after twisting
Screw nut
Figure 4
Figure 5
Figure 6
Bushing
Figure 3
Connection between the water inlet hose and the washer
1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
jointer of the
water inlet valve
nut of the water
inlet hose
water absorption
cushion.
Connection between the jointer of the water inlet hose
and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Locking level
the jointer of the
water inlet hose
Slider
Check the connection between the jointer of the water inlet
hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept
on the faucet to prevent damaging the fixing screw.
Locking level
Slider
1 Preparation before washing
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3.Put down the drain hose.
Pay attention to followings before washing the laundries
Confirm if there's
special requirement
for the laundries.
a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries with infest color from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
please apply detergent in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals directly into the washing machine.
Clear the pocket.
Take out the coins ,
sand,hairpins etc.
Fasten the buttons
and zippers.
The quantity of the
laundries shall not
exceed the rated
value. The big
laundries like the
jeans shall be put
in loosely.
When the pulsator is
running ,the buttons of
the laundries may cause
noise. For the sake of
discretion ,please put
the laundries with
buttons into other
laundries.
2 Put in the laundries
The capacity of washing of the machine refer to
the largest weight of the standard laundries under
dry condition that can be washed in one time.
Laundries quantity in one washing cycle shall
be lower than the rated capacity. The largest
capacity of this machine is 6.0 kg.
The thickness ,size , type of the cloth will influence
the actual washing capacity. It is suitable to put in
reasonable amount of laundries and the laundries
can be turned round in washing for one time
washing.
Do not select the higher than "4" water level for
laundries less than 1.0kg ,so as to avoid splashing
of water.
3 Put in the detergent
Access for detergent and washing powder
Access for softener
Detergent box
How to use the whitener
Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.
Avoid using whitener on laundries with colour or
pattern as they are prone to lose colour.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and
quantity of the whitener.
For powder whitener, please dissolve it before use.
How to use the washing powder
Directly dissolved in the machine (not applicable for fuzzy program and reserve wash)
1.Fill small quantity of water.
2.Add the powder Run for 30 seconds to dissolve it completely.
3.Put in the laundry. Select suitable water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 and a container.
2.Add the powder while stirring to fully dissolve it In selecting
The super quick program, it is suggested to adopt liquid detergent instead of washing powder to guarantee the washing effect.
The powder is more prone to pollute the laundry than the detergent. Therefore please use it with suitable quantity.
It is suggested not to use high sudsing detergent.
Washing powder with poor quality or long time storage maybe caked. Please pay attention to cleaning the detergent box in time.
Put the washing powder and softener into the detergent box
directly as Indicated in the left figure.
After that, please close the detergent box. Refer to the following
list for the usage of the detergent :the standard dosage of the
detergent and the water quantity.
How to use softener
See to the manual of softener for the usage
and dosage. When adding softener into the
softener inlet of washing powder box, note
that it shall not exceed the lower side of the cap.
Do not leave the softener for long period after
adding it into the box. Otherwise it may be
solidified and block the inlet.
As the softener is easy to solidify, please clean
the box frequently. (You shall clean it each time
you use reserve function).
Before use softener, you must select to sterilize
function.
4 Use the operation buttons
Description of the function of buttons
Mode and meaning of the indicators
Flashing: indicate the running program
On: indicate the program about to run, or indicate the
selected mode
Digital tube
During sensing, it displays
During operation of programs, it displays the remained time
(minute) or remained times of the corresponding procedure
Minutes
Minutes
Times
SOAK
WASH
RINSE
Minutes
SPIN
SOAK button
Push the SOAK button to set
the soak procedure.
During STANDARD and
JEAN programs, push the
SOAK button to set different
soak time (10,20,30,40 minutes)
During FIBER and
COTTON programs, push
the soak button to select soak
procedure, but the soak time
cannot change.
During QUICK
, POSTHASTE , WOOLLEN ,
and SILK programs, push the
SOAK button, the machine
have no reaction.
WASH button
Push the WASH button to set
the wash procedure.
During STANDARD and
JEAN programs, push the
wash button to set different
wash time (from 0 to 25 minutes)
During FIBER , COTTON
WOOLLEN , and SILK
programs, push the WASH
button to select wash
procedure, but the wash time
cannot change.
During QUICK
, POSTHASTE , programs,
push the wash button the
machine have no reaction.
RINSE button
Push the RINSE button to set the rinse
and disinfect procedure.
During STANDARD and JEAN
programs, push the RINSE button to set
different rinse times ( 0, 1, 2, 3, 4times).
During FIBER , COTTON ,
WOOLLEN and SILK programs, push
the RINSE button to select rinse
procedure, but the rinse times cannot
change.
During QUICK , POSTHASTE
programs, push the RINSE button, the
machine have no reaction.
During STANDARD program, the machine
is set to save water program. If you push
the rinse button before starting operation, it
will change to water storage rinse program.
SPIN button
Push the SPIN button to set
the spin procedure.
During STANDARD and
JEAN programs, push the
SPIN button to set different
spin time (from 0 to 9 minutes)
During FIBER , COTTON ,
WOOLLEN and SILK
programs, push the SPIN
button to select spin procedure,
but the spin time cannot change.
During QUICK ,
POSTHASTE , programs,
push the SPIN button, the
machine have no reaction.
CHILD LOCK FUNCTION
Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF
button. The digitron displays CL . You can continue setting desired washing procedures.
After setting, push down the START/PAUSE button. The child lock function is activated. All of
the buttons are locked and cannot make selection.
Release the child lock function: push down the WATER LEVEL and SPIN button at the same
time for more than 1 second. After a beep sound, the child lock function is released.
RESERVE/REMAIN time indicator digitron
During sensing, it displays -During reserve procedure, it displays the remained reserve time (in
hours)
During operation of programs, it displays the remained time (minutes).
If the remained time exceeds 99 minutes, it adopts A at tens place to
represent 100 minutes, b to represent 110 minutes. For instance, A3
represents 103 minutes.
In case of abnormal phenomenon, it displays
the abnormal symbol (see to Page 16)
Page16
POWER ON/OFF button
Push the ON/OFF button to switch
on the power.
When the power is on, push it
again to switch off the power.
Push the ON/OFF button to switch
on the power.
If the START/PAUSE button is not
pushed, the washing machine will
automatically switch off the power
after 5 minutes.
STANDARD
Time remained
(minutes)
Reserve
(hours later)
9
7
10
8
5
6
3
1
FIBER
COTTON
4
2
WOOLLEN
SILK
QUICK
POSTHASTE
JEAN
WATER LEVEL
RESERVE/CALEFACTION
"RESERVATION/CALEFACTION" button
Press " "button to set
RESERVATION/CALEFACTION
reservation or heating Function.
During machine running, the digitron indicates the cycle
remaining time in minutes). Press "
/CALEFACTION
remaining reserved time to cycle end (in hours).The digitron
will indicate the running state of the machine.
Heating function can be selected if keep pressing
"RESERVATION/CALEFACTION"Button for more than 2 s.
If the decimal point of digitron is lighted, it means heating
function is selected. The initial temperature is about 30 ,
and you can select your desired value in a switching
sequence 30 40 off 20 . If keep pressing the
"RESERVATION/CALEFACTION" button for more than 2 s
again, the temperature indicator turns off, and the
Reservation can be selected , you can select reserved time.
After the machine starts running, if selection or cancellation
of heating function is desired, you should switch off the power
and reselect.
"button, the digitron will Indicate the
RESERVATION
POWER
ON/OFF
START
PAUSE
S
TART/PAU
After the power is switched on, push it to Start the machine
PROGRAM
SE button
During working, push it to pause working.
During pause, push it to resume working.
PROGRAM se
Following automatic programs are available for selection
PROGRAM
STANDARD
QUICK
POSTHASTE
JEAN
FIBER
COTTON
WOOLLEN
SILK
WATER LEVEL butto
The washing machine can detect the laundries automatically.
After detection, it will set the water level to suitable value among 4, 6,
8, and 10 automatically.
You can also set water level by yourself. After the machine is started,
it will not set water level automatically. You shall push the
start/pause button to make new setting.
If there's water inside the tub, the machine cannot detect the
laundries and will display water level 6 .
If wet laundries are put in, it may display water level 10 . You must
set suitable water level by yourself.
If POSTHASTE programs selected, it will display water level 3 .
When water level 2 is reached in water filling, it will perform
washing while filling water. When water level 3 is reached, it will
change to normal washing.
During operation of wash and rinse program, you can push down
the water level button to add water. When you release the button, or
it reaches the overflow water level, the machine will stop adding
water.
Applicable situation
Common washing
Quick and high-efficiency wash for
common
Super quick wash of the laundry under 1 kg
with light soil
Washing the relatively big and thick laundries
Washing the chemical fiber laundries
Washing the cotton textiles
Washing the woolen textiles
Washing the textile
n
lection button
Steps of using the operation buttons and description of the steps
b
M
SOAK
inutes
WASH
M
inutes
Times
RINSE
Minutes
Time remained
(Minute
Reserve
(Hour)
SPIN
RESERVE/
10
9
)
8
7
6
5
4
3
2
1
WATER LEVEL
FIBER
COTTON
WOOLLEN
SILK
SATANDARD
QUICK
POSTHASTE
JEAN
PROGRAM
START
PAUSE
POWER
ON/OFF
1 Push the "POWER ON/OFF " button to switch on the power.
POWER
ON/OFF
2 Push the "PROGRAM" button to select suitable automatic program.
PROGRAM
After switching on the power, the machine will set "STANDARD " program automatically. To select
other automatic program, push the "PROGRAM" button till the relative indicator is on. Refer to the
"PROGRAM" button on Page 11 for the selection.
For instance: select "POSTHASTE" program for laundries with small
quantity and light soil.
Page 11
In selecting the •••••••• program, the machine
will execute fuzzy program to select water and wash
time according to the cloth and weight of the
laundries. The full procedure is controlled
automatically.
3 Push the "SOAK", "WASH", "RINSE" OR "SPIN" button to select suitable procedure.
Minutes
SOAK
FIBER
COTTON
WOOLLEN
SILK
Minutes
WASH
Times
RINSE
STANDARD
QUICK
POSTHASTE
JEAN
Minutes
SPIN
After switching on the power, the washing machine will set to common
program including"wash, rinse,spin "automatically. To select other
procedures, push the "SOAK", " WASH", " RINSE" or "SPIN" button
to select the time of soak, wash and spin, and the times of rinse. After
switching on the power, if you push one of the button among "WASH",
"RINSE"and"SPIN", the digitron of the former procedures will turn off
automatically. The former procedures will not run. For instance: after
switching on the power. If you push the "SPIN"button first, it will execute
spin singly after starting.
Attention
Even there's no water in the tub, a certain period is
required before spin starting.
Do not use the soak program for the woolen textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
The pulsator will not rotate unless the water is
filled to"3" water level.
The soak procedure can work in cooperation with automatic programs like standard, jeans,
fiber and cotton. There is intermittent pulsator stirring during soak.
After the machine starts operation, you can only set the program and procedure during
washing, and can not make setting in other cases.
Press " WATER LEVEL "button,
select suitable water level
After switching on the power, the washing machine will execute fuzzy program automatically to
detect the cloth. After defection, it can set the water level automatically. To select other water
level, first push the "START/PAUSE"button, then push the "WATER LEVEL" button to set the
water level. Refer to "water level button"in Page 11 for selection.
Page 11
WATER
LEVEL
Push the "RESERVE/CALEFACTION "button to select suitable
reserve wash program
RESERVE/CALEFACTION
After switching on, the washing machine reserved wash program will be automatically set
i
nactive. If you desire a wash cycle to end at a reserved time, you can press the
"RESERVATION/CALEFACTION" button to set a reserved wash program.
Refer to The button of
"RESERVATION/CALEFACTION" on page 11.
Confirm the reserve program
When "RESERVATION" becomes active, the nixie tube displays the time
to the end of the reserved wash cycle, and the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
Confirm the heating function
Keep pressing the"RESERVATION/CALEFACTION" button for more than 2 s,
the heating indicator turns on (red).
Keep pressing the
heating indicator turns off and heating function is cancelled.
After the machine starts running, if selection or cancellation of heating function
is desired, you should switch off the power and reselect.
"RESERVATION/CALEFACTION"button for more than 2 s again, the
Page 11
6.Push the "START/PAUSE " button
5 Close the lop lid
6 Finish washing
the washing will finish
about 18 hours later
START
PAUSE
As the top lid opened, the Washer will automatically give an alarm
and stop running, exclusively during supplying water and rinsing.
After finishing wash , it will alarm
automatically.
7.Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may
influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Clean the detergent box and set it on
the control panel seat.
1.The method of dismantle : Push it up aslant and gently.
2.The method of install : install it upwards and aslant
and push it in .
Dismantle Install
The filter screen of the water inlet valve is likely to be
blocked by foreign materials and influence the water
inlet.
Please clean it with brush every two months.
The lint filter must be used during washing.
It must be cleaned in time after each using
Lint filter:
1.
Rotate the inner tub with hand till the lint filter reaches
the position convenient for you to take it off. Pull it up to
dismount.
2.Push it down to install.
3.Clean the filter screen after washing.
Dismantle
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
Install
Dismantle
Install
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (
about 1 hour), then close the top lid.
Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns
sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special
maintenance department or after-sale service department of our company. Do not repair it by yourself.
Phenomenan The reason How to settle
The digitron displays E0.
The drainage cannot work, or is too slow.
The digitron displays E1.
It stops running in midway. The digitron
displays E2.
The safety switch acts, and the
spinning cannot work. The
digitron displays E3.
The water filling does not work, or is
slow. After about 40 minutes later,
the digital displays E4.
The digitron displays E5.
The digitron displays E6.
The digitron displays F5.
The machine does
not act
There's abnormal sound
inside the machine
The water tap leaks
Not wash
Not spin
The top lid is opened during reserve
procedure.
Is the drain hose put down?
Is the drain hose blocked?
The top lid is not closed.
Are the laundries put slantingly?
Is the machine slanting?
Is the water tap opened, or is there water
supply failure?
Is the water inlet valve blocked?
Is the water pressure too low?
The temperature sensor is fallen.
The water level sensor is bad.
The water level drops to the replacement
point after it has supplied water for 2 times
during the whole process.
Is there power failure?
Is the power plug inserted tightly?
Is the water level reached preset position?
Is the power plug inserted tightly?
Is the top lid closed reliably?
Are the laundries set flat?
Is the machine slanting?
Are the laundries put slantingly in spinning?
Are there any foreign materials?
Is the screw of the jointer of water
inlet hose loose or awry?
Close the top lid.
Put down the drain hose. Open and close the
top lid once.
Clean the foreign material. Open and close
the top Lid Once.
Close the top lid.
Reorder the laundries. Close the top lid.
The machine will start running after 10
seconds of being placed horizontally.
Open the water tap. Push the Start/Pause
button once.
Clean the water inlet valve then push
the Start/Pause button once.
Push the Start/Pause button once.
Please contact the after-sales service department.
Please contact the after-sales service department.
Open and close the top lid once.
Please use it when there's power supply.
Insert the power plug tightly.
Fill water to the preset position.
Insert the power plug tightly.
Close the top lid.
Set the laundries flat.
Adjust the machine to be even
Reorder the laundries and close the top lid.
Remove the foreign materials.
Fasten the screw of the jointer properly.
Common phenomena
Phenomena
* The spinning is intermittent when it starts.
* The wash procedure pauses.
* Select "SPIN" program, but it does not work.
* The pusaltor pauses during washing , rinsing or
adding water.
* There may be some water flowing out of the
drain hose in the first use of the machine.
*
When the power plug is inserted,computer
board indicator is switched on,and the machine
starts working.
* The actual heating temperature may have
discrepancy with the setting level.
Explanation
* Balance the laundries to avoid slanting.
* The cloth sensor is detecting the cloth. It will start
adding water after about 48 seconds.
* The program is setting the drain time. A certain
period is needed before it starts spinning.
* It is to avoid splashing during water filling.
* It is the water remained in the performance
inspection by the factory.
It is the special resume function..In the case of power
*
failure or the power plug is loose during washing, the
machine can save the running program, and resume
the program after the power supply is recobered. You
do not need to set the program again
* This is the normal phenomenon .The actual heating
temperature is also influenced by the atmosphere
temperature the water temperature for wash and the
water hardness.
Packing list
Name
User's manual
Warranty manual
Components of the water inlet hose
The end connecting to the washing machine
Jointer connecting the water
inlet hose and the water faucet
The end connecting to the water
inlet hose jointer
Water inlet hose (1 piece)
Water inlet hose joint (1 piece)
Bottom plate
Tapping screws
Inner cover component
Fuzzy Computerized
Automatic Washing
Machine
Quantity
One
One
One
One
Eight
One
One
Storage position
Inside the document bag
Inside the document bag
Inside the accessory bag
Between the upper cushion of the
washing machine package and the
upper seal of the package carton
Inside the accessory bag
Inside the accessory bag
Specification
Rated washing / spinning capacity 6.0kg/6.0kg
Water level/Water quantity (about)
Injection pressure 0.03MPa~0.78MPa
1/12L 2/16L 3/20L 4/25L 5/29L
6/33L 7/38L 8/42L 9/47L 10/50L
Loading...