Haier XQGH80-B1466, XQGH80-HB1466, XQGH70-HB1266, XQGH70-B1266 User Manual

Automatic Drum Washing Machine

Instruction Manual

Please read the manual carefully before using this machine.

Please keep it properly for reference.

Product Characteristics

DD variable-frequency motor

technology

Best door-opening height design

Steel rib integrated structure

Window mat anti-bacterial and anti-mildew technology

Drying function

(applicable to XQGH80-HB1466 and XQGH70-HB1266 models)

Air washing function

Specification

Model

Power

Inflowing water pressure

Rated washing capacity

Rated spinning capacity

Rated drying capacity

Rated spinning speed

Spinning noise dB (

Energy efficiency rating

(MPa)

(kg)

(rpm)

Washing noise dB(A

weighted )

weighted)

XQGH80-HB1466 XQGH70-HB1266 XQGH80-B1466 XQGH70-B1266

0.03～1.0 0.03～1.0 0.03～1.0 0.03～1.0

8 8

5 5

1400 1400 1400 1400

50 50 50 50

Double-balanced ring vibration reduction technology

Self-cleaning function

Drawer dox design

220-240V/50Hz

8 8

/ /

B A+++ A+++

Overall Dimension

(H/D/W)

(mm)

1200/680/600 1200/680/600 1200/680/600 1200/680/600

Displayed

code

Code paraphrase

Troubleshooting methods

The washing machine is in automatic weighting

condition

Level codes of washing quantities for dryer

Level codes of washing quantities for washer

Shut down of the washing machine

Not meet door opening condition, not allow to

unlock the door lock

Children lock prompt

All procedures end

Drainage fault

Abnormal locking of the door lock

Normal prompt

Check whether the drain pipe is blocked or bent and clean

the drain filer

Re-close the door of the washing machine. Re-lock the door after the “Start” key is pressed

Full-automatic Washing Machine. Please read the manual carefully before using this machine.

Please read carefully safety cautions in the next page that you can safely and correctly use it. Diagrams in this manual are diagrammatic drawings. The appearances and colors of the product and its parts may be different from those shown in the diagrammatic drawings of this manual owing to product’s improvement and series expansion, please subject to material object. Apologize for this.

This machine belongs to class-I appliance, please ensure electrical safety when you use it.

Check whether the faucet is opened, the water pressure is too low or

Abnormal water inflowing

Unequal distribution during dehydration

water is cut off. Eliminate it by pressing the “Start/Pause” key. If the phenomenon still continues, please contact the maintenance department

Check the adjustable feet and whether the washing machine is steady; take clothes out and scatter and equally distribute them; if the

phenomenon still continues, please contact the maintenance department.

If the following alarm icons appear, press the “Power” key to shut down the machine for eliminating them; and if they still

appear, unplug the power plug and contact the agency or the manufacturer.

Alarm

(It is not allowed to operate the areas with the mark, otherwise, it is likely to damage the washing machine or endanger the personal safety of users.)

Note

Safety Cautions

(The contents with the mark relate to product and user’s safety, thus the user shall undertake the operation in strict accordance with requirements, otherwise, it is likely to cause damage to the washing machine or endanger user’s safety.)

Not damage, process, randomly bend, clamp, twist, unplug or bundle the power line and the plug. Not place heavy objects on the power line and the plug. Not touch, insert or unplug the plug with wet hands. Stop using a damaged power line and plug as well as a loose socket.

Please use an independent power socket with maximum safe current more than 15A. The grounding terminal in the socket shall be reliably grounded, and the socket shall be a qualified product with CE certification. Please completely insert the power plug into the socket aperture and clean the plug regularly, since it will cause poor insulation, fire, etc. in case of dust accumulation and moisture. Ensure that the power plug is unplugged when the washing machine is not used for a long time or is being cleaned. The user shall prepare fuses and other overload protection devices with suitable specifications at home, and the ammeter, the power line and the socket should be able to withstand the current of 10A. If the power line is damaged, it must be replaced by the manufacturer, the agent or other persons with relevant expertise so as to avoid dangers.

Not wash and dry clothes stained with beauty oil, massage oil, edible oil, animal oil, machine oil, dry cleaning oil, propellant, diluents, petrol, resin and other inflammable substances. Not place inflammable substances into the roller or near the washing machine. Not wash, poach or dewater the raincoat, bicycle cover, feather clothing unsuitable for machine washing, waterproof clothing and carpet, otherwise, it will cause abnormal vibration and damage to the washing machine and the clothing during the dewatering process. Not wash the clothing with inflammable cleaning agent, dry cleaning solvent and other chemicals; not use inflammable spraying agent near the washing machine; and not insert or unplug the power plug of the washing machine during the leakage of coal gas and other inflammable gas. Not open the drain filter during the operation, preventing plenty of water from flowing outwards.

Must use a new water inlet pipe and not allowed to reuse a used water pipe. Under the normal operation of the washing machine, the pressure of connected running water is allowed to be 0.03MPa at minimum and 1.0MPa at the maximum.

Not allow children to look at and enter the inner roller, to avoid injuries and personal safety accidents of children. Not place the low rack and bench near the washing machine, to prevent children from touching the control panel of the washing machine through them. Not allow children to use the machine independently. Not place the washing machine in such place with much moisture and vulnerable to wind and rain, otherwise, water will remain on the electrical appliance, resulting in ignition damage or other incidents. If water is accidently sprayed or permeated into the washing machine, the machine is not allowed to use until it is dried by air. Not directly place the washing machine on an un-ventilated carpet; not block up the ventilation opening at the bottom thereof; not place the machine close to the wall or the furniture so as to avoid incidents; and not place the washing machine on a table higher than the ground for use, so

as to prevent the washing machine from falling off.

Not put and extend hands or feet into the lower part of the washing machine. Not climb to the upper part of the washing machine or place easily-damaged objects on the washing machine.

Not place the washing machine in such place near heat source, exposed to sunlight and easily frozen in winter, so as to avoid the aging of plastic parts and rubber parts.

Not touch the inner roller, metal parts, the window screen, the master control board, the distributor box and metal buttons of clothing during the washing or drying process or in the short time after

drying, to avoid the scalding. Furthermore, not touch the machine when hot water is being discharged.

Status

Poor washing effect

Phenomena Others

Weak washing

Halfway stop during running process

poaching

During

Repeated poaching

No dehydration

During dehydration

High dehydration noise, with vibration and movement

The dehydration procedure is conducted, but clothes are still not dried

drainage

During

No drainage or slow drainage

Local heating of the control panel

Reservation time has passed, but washing still continues.

Before running Troubleshooting methods

Whether the type and the dosage of cleaning solution are suitable? Whether the procedure is correctly selected?

Whether the weight of washings exceeds the rated washing capacity of the washing machine?

Whether power is accidently off or water is cut off?

Whether the “Start/Pause” key is pressed?

The washing machine with the function of stopping after the cleaning is finished can automatically increase or reduce poaching times (1-2 times) according to the dirtiness degree of clothes.

If the washing machine is set with the procedure of drainage time, it takes a certain time before dehydration.

Whether clothes are tied or wound?

Whether the packaging bolts are completely dismounted? Whether the washing machine is placed steadily? (Feet can be adjusted to remain the stability of the washing machine.) Whether clothes are wound or tied?

Whether the washing machine is collided with other objects?

Whether foreign bodies enter the washing machine?

Different types of clothes result in different dehydration effects. Whether the washing machine is in eccentric protection due to fewer clothes?

Whether the drain pipe is bent, blocked or frozen?

Whether the filter is blocked?

It is caused by the effect of tepefaction of electronic components, which is normal.

Poor water drainage and inflowing conditions or unequal distribution of clothes result in time delay.

192

+ 8 hidden pages