Automatic Drum Washing Machine
Instruction Manual
Please read the manual carefully before using this machine.
Please keep it properly for reference.
Product Characteristics
DD variable-frequency motor
technology
Best door-opening height design
Steel rib integrated structure
Window mat anti-bacterial and
anti-mildew technology
Drying function
(applicable to XQGH80-HB1466 and XQGH70-HB1266 models)
Air washing function
Specification
Model
Power
Inflowing water pressure
Rated washing capacity
Rated spinning capacity
Rated drying capacity
Rated spinning speed
Spinning noise dB (
Energy efficiency rating
(MPa)
(kg)
(kg)
(kg)
(rpm)
Washing noise dB(A
weighted )
weighted)
A
XQGH80-HB1466 XQGH70-HB1266 XQGH80-B1466 XQGH70-B1266
0.03～1.0 0.03～1.0 0.03～1.0 0.03～1.0
8 8
8 8
5 5
1400 1400 1400 1400
50 50 50 50
68
B
Double-balanced ring vibration
reduction technology
Self-cleaning function
Drawer dox design
220-240V/50Hz
8 8
8 8
/ /
68
B A+++ A+++
68
68
Overall Dimension
(H/D/W)
(mm)
1200/680/600 1200/680/600 1200/680/600 1200/680/600
21
Displayed
code
Code paraphrase
Troubleshooting methods
The washing machine is in automatic weighting
condition
Level codes of washing quantities for dryer
Level codes of washing quantities for washer
Shut down of the washing machine
Not meet door opening condition, not allow to
unlock the door lock
Children lock prompt
All procedures end
Drainage fault
Abnormal locking of the door lock
Normal prompt
Normal prompt
Normal prompt
Normal prompt
Normal prompt
Normal prompt
Normal prompt
Check whether the drain pipe is blocked or bent and clean
the drain filer
Re-close the door of the washing machine. Re-lock the
door after the “Start” key is pressed
Full-automatic Washing Machine.
Please read the manual carefully before using this machine.
Please read carefully safety cautions in the next page that you can safely and correctly
use it.
Diagrams in this manual are diagrammatic drawings. The appearances and colors of the
product and its parts may be different from those shown in the diagrammatic drawings of
this manual owing to product’s improvement and series expansion, please subject to
material object. Apologize for this.
This machine belongs to class-I appliance, please ensure electrical safety when you use
it.
20
Check whether the faucet is opened, the water pressure is too low or
Abnormal water inflowing
Unequal distribution during dehydration
water is cut off. Eliminate it by pressing the “Start/Pause” key. If the
phenomenon still continues, please contact the maintenance
department
Check the adjustable feet and whether the washing machine is steady;
take clothes out and scatter and equally distribute them; if the
phenomenon still continues, please contact the maintenance
department.
If the following alarm icons appear, press the “Power” key to shut down the machine for eliminating them; and if they still
appear, unplug the power plug and contact the agency or the manufacturer.
1
Alarm
(It is not allowed to operate the areas with the mark, otherwise, it is likely to damage the
washing machine or endanger the personal safety of users.)
1
Note
Safety Cautions
.
(The contents with the mark relate to product and user’s safety, thus the user shall
undertake the operation in strict accordance with requirements, otherwise, it is likely to
cause damage to the washing machine or endanger user’s safety.)
Not damage, process, randomly bend, clamp, twist, unplug or bundle the power line and the
plug.
Not place heavy objects on the power line and the plug.
Not touch, insert or unplug the plug with wet hands.
Stop using a damaged power line and plug as well as a loose socket.
Please use an independent power socket with maximum safe current more than 15A. The
grounding terminal in the socket shall be reliably grounded, and the socket shall be a qualified
product with CE certification.
Please completely insert the power plug into the socket aperture and clean the plug regularly,
since it will cause poor insulation, fire, etc. in case of dust accumulation and moisture.
Ensure that the power plug is unplugged when the washing machine is not used for a long time
or is being cleaned.
The user shall prepare fuses and other overload protection devices with suitable specifications
at home, and the ammeter, the power line and the socket should be able to withstand the
current of 10A.
If the power line is damaged, it must be replaced by the manufacturer, the agent or other
persons with relevant expertise so as to avoid dangers.
Not wash and dry clothes stained with beauty oil, massage oil, edible oil, animal oil, machine
oil, dry cleaning oil, propellant, diluents, petrol, resin and other inflammable substances.
Not place inflammable substances into the roller or near the washing machine.
Not wash, poach or dewater the raincoat, bicycle cover, feather clothing unsuitable for machine
washing, waterproof clothing and carpet, otherwise, it will cause abnormal vibration and
damage to the washing machine and the clothing during the dewatering process.
Not wash the clothing with inflammable cleaning agent, dry cleaning solvent and other chemicals; not use inflammable spraying agent near the washing machine; and not insert or unplug
the power plug of the washing machine during the leakage of coal gas and other inflammable
gas.
Not open the drain filter during the operation, preventing plenty of water from flowing outwards.
Must use a new water inlet pipe and not allowed to reuse a used water pipe.
Under the normal operation of the washing machine, the pressure of connected running water
is allowed to be 0.03MPa at minimum and 1.0MPa at the maximum.
Not allow children to look at and enter the inner roller, to avoid injuries and personal safety
accidents of children.
Not place the low rack and bench near the washing machine, to prevent children from touching
the control panel of the washing machine through them.
Not allow children to use the machine independently.
Not place the washing machine in such place with much moisture and vulnerable to wind and
rain, otherwise, water will remain on the electrical appliance, resulting in ignition damage or other
incidents. If water is accidently sprayed or permeated into the washing machine, the machine is
not allowed to use until it is dried by air.
Not directly place the washing machine on an un-ventilated carpet; not block up the ventilation
opening at the bottom thereof; not place the machine close to the wall or the furniture so as to
avoid incidents; and not place the washing machine on a table higher than the ground for use, so
as to prevent the washing machine from falling off.
Not put and extend hands or feet into the lower part of the washing machine.
Not climb to the upper part of the washing machine or place easily-damaged objects on the
washing machine.
Not place the washing machine in such place near heat source, exposed to sunlight and easily
frozen in winter, so as to avoid the aging of plastic parts and rubber parts.
Not touch the inner roller, metal parts, the window screen, the master control board, the distributor
box and metal buttons of clothing during the washing or drying process or in the short time after
drying, to avoid the scalding. Furthermore, not touch the machine when hot water is being
discharged.
Status
Poor washing effect
Phenomena Others
Weak washing
Halfway stop during
running process
poaching
During
Repeated poaching
No dehydration
During dehydration
High dehydration noise,
with vibration and movement
The dehydration procedure is
conducted, but clothes are still
not dried
drainage
During
No drainage or slow drainage
Local heating of the control panel
Reservation time has passed,
but washing still continues.
Before running Troubleshooting methods
Whether the type and the dosage of cleaning
solution are suitable?
Whether the procedure is correctly selected?
Whether the weight of washings exceeds the rated
washing capacity of the washing machine?
Whether power is accidently off or water is cut off?
Whether the “Start/Pause” key is pressed?
The washing machine with the function of stopping
after the cleaning is finished can automatically
increase or reduce poaching times (1-2 times)
according to the dirtiness degree of clothes.
If the washing machine is set with the procedure of
drainage time, it takes a certain time before
dehydration.
Whether clothes are tied or wound?
Whether the packaging bolts are completely
dismounted?
Whether the washing machine is placed steadily?
(Feet can be adjusted to remain the stability of
the washing machine.)
Whether clothes are wound or tied?
Whether the washing machine is collided with
other objects?
Whether foreign bodies enter the washing machine?
Different types of clothes result in different
dehydration effects.
Whether the washing machine is in eccentric
protection due to fewer clothes?
Whether the drain pipe is bent, blocked or frozen?
Whether the filter is blocked?
It is caused by the effect of tepefaction of
electronic components, which is normal.
Poor water drainage and inflowing conditions or
unequal distribution of clothes result in time delay.
192
14.
Troubleshooting
The following situations are not always faults. Please check the situation according to the following sheet prior
to delegated maintenance. If the fault is confirmed, please contact the agency or the manufacturer, it is not
allowed to repair it on the own. As for those items without the requirement on power-on detection, please
unplug the power plug to detect them.
2.
1
Table of Contents
Safety Cautions
……………………………………
2
Status
Phenomena During washing
Before running
Little water is left in the
drain pipe and the
washing machine in initial use.
No running
Incapable of pressing keys
Water leakage of faucet
Troubleshooting methods
Normal. The water is left in delivery detection.
Whether the power is off or the power supply is
abnormal?
Whether the power plug is firmly plugged in the socket?
Whether the fuse of the power supply or the current
breaker is in good condition?
Whether the power key is pressed?
Whether the faucet is opened?
Whether the reservation function is set?
Whether the “Start/Pause” key is pressed?
Whether the function of “Children Lock” is set?
Refer to the instruction of “Cancel or re-select
procedure during the operation” introduced in
“Other Functions” in page 22.
Whether the faucet is in good shape?
Whether the joint of the water inlet pipe is
assembled in place?
Whether the faucet is damaged?
2
3
4
5
6
7
8
9
10
11
12
Table of Contents
……………………………………
Operation Cautions……………………………………
Names of Components (Accessories) ………………
Disassembly of Packaging and Transporting Parts
and Adjustment of Feet
………………………………
Preparation before Using ……………………………
Control Panel and Procedural Specification…………
Procedural Guide ……………………………………
Preparation before Washing and Referenced
and Disinfectant
……………………………………
Operation Steps ……………………………………
Application of Detergent Dispenser Box ……………
Other Function ………………………………………
3
4
5
7
8
10
12
13
14
15
15
18
No water inflowing or slow
water inflowing
Abnormal sound
Whether the faucet is opened? Whether water is cut off?
Whether the filtering net at the water inlet is
blocked? (Please clean it)
Whether the faucet and the water inlet are frozen?
Whether the reservation procedure is selected to
prevent water inflowing?
Whether the “Start/Pause” key is not pressed?
Whether the water inlet pipe is bent?
Whether the water pressure is too low?
Whether the washing machine is tilted or vibrates?
Whether coins, zippers and other foreign bodies
enter the washing machine?
Whether the sound comes from the drainage pump
during its normal operation?
13
14
Cleaning/Maintenance
………………………………
Troubleshooting ……………………………………
17
18
3
Operation Cautions
13.Cleaning/Maintenance
Drawer
Please ensure that the cover of the drain filter is tightly closed before the drawer is closed, so
as to prevent the filter cover from being damaged.
It is suggested that an object exceeding 5 kg should be not placed in the drawer.
Please do not tread the drawer and the board after the drawer is drawn out.
Not put the baby or the pet into the drawer, avoiding safety accidents.
Not pour water into the drawer.
Others
Since the running water pressure is unstable, please check the joints of the water inlet pipe, the faucet and the drain
pipe each time before using the washing machine, to ensure the fastness of the joints. If the water pipes are loosened
or water is leaked, please close the faucet and properly handle it or contact the agent, the manufacturer or relevant
technicians. It can not be used before connection.
Not clamp the clothing when the doo
Please ensure that the faucet is closed after the washing is finished.
When the washing machine is not used, please slightly open the door of the washing machine and wipe water and
bubble left on the window pad and the machine door glass, so as to avoid odor. The washing machine shall not be
covered by a plastic dustproof cover to avoid moisture accumulation.
Not open the detergent dispenser box when the
softener.
Not wash women’s underwear with steel wires in the washing machine, to prevent the washing machine and the
clothing from being damaged.
The machine just can wash the clothing suitable for machine washing. If in doubt, please follow the washing introduc
tion logos on the clothes.
Water and power shall be cut off each time after the washing is finished, and clean the interlayer of the observation
window pad to prevent dirt from adhering to the clothing again.
If the machine is used at the temperature of 0°C or below, the water inlet valve and the drainage system may be
damaged.
If the machine is placed in the place with the temperature of 0°C or below, the machine can be used after being
moved to a place with room temperature for standing for 2-4 hours.
Not place the clothing contaminated by chemicals in the washing machine.
As for such kind of washing machine with the drying function, it is not allowed to put the drying shelf into the washing
machine when the washing procedures (except for the function of “Shelf Drying”) is selected, to prevent the washing
machine from being damaged during the operation.
As for such kind of washing machine with the drying function, when the clothing is being dried, please ensure that the
faucet is opened, as cooling and dehumidifying procedures are
conducted.
Please put small articles such as handkerchief, gloves and socks, and easily-winding and damaged clothes into
washing net bags for washing, poaching and dehydration, so as to prevent the small articles from dropping between
the inner roller and the window pad of the washing machine and result in inadequate washing and drying. The weight
of articles placed in each washing net bag shall not exceed 30
shall be placed into the washing machine together with other clothes which are not put in net bags, otherwise, the
balance of the washing machine will be reduced and the machine will abnormally vibrate.
After high-speed dehydration, the clothes will adhere to the inner roller wall of the washing machine due to the effect
of centrifugal force. If follow-up drying is needed, it is suggested that the user tak
them into the washing machine for drying after the clothes are scattered in a shaking manner, in an attempt to achieve
the best drying effect.
The product is household model washing machine, it can be used in family. It will not be free repair if used in others
place (for example school,flat, army,corporation,hospital,washhouse,cabaret,hotel,rest house etc).
r of the washing machine is closed.
machine is operating, to avoid uncompleted removal of detergent and
needed. Otherwise, the drying procedure can not be
0g, and those washing net bags placed with articles
es out the clothes and re-places
Please unplug the power plug from the socket before cleaning and maintenance.
Clean Drain Filter (at least one time every 30 days)
① Start the only dehydration procedure to conduct the drainage.
② After water is discharged from the washing machine, please insert a proper coin,
a plain-end screw driver or other tools into the groove on the right side of the
filter cover, and the filter cover is pressed rightwards and opened leftwards.
Slightly pull a residual water pipe out , take the residual water pipe cover off,
and completely discharge water left in the pipe. And then block the residual
water pipe cover, place the residual water pipe in place and clamp it.
Note: It is not allowed to pull the residual water pipe with excessive force,
otherwise, it is easy to result in damage to the residual water pipe and water
leakage. Please firmly block the residual water pipe cover, otherwise, it is easy
to lead to water leakage.
④ Take the filter out by twisting the filter handle with hands in counter-clockwise
direction.
⑤ Remove thread ends and sundries on the filter and clean the filter with clear
water.
⑥ Insert the filter along the direction of the groove and tightly screw the filter
clockwise.
⑦ Check whether is the residual water pipe cover is blocked and cover the filter.
Emergency door operation
Note：Emergency door can’t be operated when the machine is working.
Please be sure that:
The power plug from the outlet Barrel temperature is below 50 degrees,
and the drum stopworking.
① If the barrel have water, the first step is follow the instruction on the filter
cover, drain the water out.
Open the Emergency door, pull the emergency rope, then open the door
②
by hand.
③ Reset the Emergency rope and emergency door, close the drawer.
Clean Detergent Dispenser Box
① Outwards pull the detergent dispenser box to the end, as shown in Figure 1.
② Press the middle “PUSH” mark and slightly press it downwards to take the
dispenser box out.
③ Clean the dispenser box and the siphon cap with clear water.
④ Re-buckle the siphon cap and horizontally push the dispenser box
inwards and close it.
Figure 1
Clean Filtering Net at joint of Water Inlet Valve
Kindly reminder: to improve the washing effect, please do not throw away the
filtering net at the water inlet.
In case of unsmooth water inflowing, please timely clean the filtering net at the
water inlet. The specific operations are as follows:
① Unscrew the water inlet pipe, as shown in Figure 1;
② Take the filtering net out with nose pliers, as shown in Figure 2;
③ Clean the filtering net with a soft bristle brush, as shown in Figure 3;
④ Assembly the filtering net, as shown in Figure 4;
⑤ Reconnect the water inlet pipe, as shown in Figure 5;
Filter cover
Filter handle
Residual
water pipe cover
emergency door
Siphon cap
“PUSH” mark
Figure 2
Residual water pipe
emergency rope
Figure 1 Figure 2 Figure 3 Figure 5Figure 4
4
17
Resume Function
This washing machine provides resume function, which could save program operation status upon unexpected outage
or loosing plug during washing, when power is restored, this machine could work continuously according to the original
program after “Power” key is pressed.
Eccentric Protection
In the event that clothing is not uniformly distributed during dewatering, this machine will shake and scatter the clothing
again and dewater them until they are distributed evenly. If the clothing hasn’t been distributed evenly within the specified
time, the machine won’t begin dewatering in order to avoid sharply vibration, and meanwhile send “Unb” alarm. Now you
shall check whether there are any wound-up or tied-off clothing in it, and arrange them again, and then select “Separate
Dewatering” program to dewater them. When there is little clothing, the machine may not dewater or reach max rotation
speed due to eccentric protection, then some clothing could be added into the machine to do the dewatering; in addition,
it is normal that longer time is required when the washing machine distribute and shake and scatter clothing again.
Buzz Mute Function
Hold down “Tem.” key and “Speed” key at the same time for 3 sec, buzzes (excluding alarm) for all programs could be
canceled with “bEEP oFF” displayed on the screen; hold down above keys for 3 sec again, buzzes for all programs
could be restored with “bEEP on” displayed on the screen.
Memory Program
Select “Memory” program and set each washing parameter as necessary, which will be saved after washing program
finished. If the user wants to wash with the same setting, the “Memory” program could be directly selected (the program
doesn’t save such functions as Powerful Cleaning, Appointment, High Water Level and Load Gear).
(for the type with this program)
4. Name of Components (Accessories)
Top panel
Control panel
Washing powder
dispenser box
Side panel
Door handle
Start/Pause
Display screen
Power
Knob
Door lock
Window gasket
Air Washing
This function is applicable to get rid of bad smell from clothing. When the inner drum slowly rotates, the flowing hot air
could bring smell from clothing.
Please turn on the tap of washing machine and ensure the correct connection during air washing.
If some special smells due to heavy containment have not been removed completely, please wash it by water, or send
to a laundry for dry cleaning so as to reach the cleaning effect as required.
(for the type with drying function)
Manually Select Clothing Gear Function
When the washing machine with drying function is used to wash clothing, after the program is started, the machine will
automatically weigh the clothing in the drum. If you want to cancel this function, when “ ” is displayed on the display area
for remaining time, you could turn around the program selection knob to “AL-1”, “AL-2”, “AL-3”, “AL-4” or “ ”, among
which “ ” indicates automatic weighing. For manual selected gear, if there is much clothing in the drum, it is
recommended to select “AL-3” or “AL-4”; if there is less clothing in it, select “AL-1” or “AL-2”.
If the present programs contain drying function, the gear of “AL-4” can’t be selected by hand.
If only drying function of the present programs can be selected, and the display area for other function keys do not light,
the clothing gear can’t be selected by hand.
Note: for the washing machine without drying function, please see the introductions to Load keys in “Instructions to
Control Panel and Program” on Page 11 for detail operation of manual selection of clothing gear.
Note:
For energy test program of the drying type, please select “Cotton + Washing 50min + Rinsing 3 times
+ Spinning 6min + 60°+ Max Speed + Powerful Cleaning ”, and meanwhile select max load level “AL-4” by
hand.
For energy test program of the non-drying type, please select “Cotton + Washing 50min + Rinsing 3
times + Spinning 6min + 60°+ Max Speed + Powerful Cleaning ”, and meanwhile select max load level “L-4”
by hand.
Door
Door glass
Emergency gate for door lock
Drainage filter cover
Handle of drawer
Drawer
Adjustable foot (4 in total)
This picture is for reference only. Since our products are subject to futher modification and
expansion, the machine you purchased may have discrepancies with those in above picture in
the appearnce, color and functions.
516
Power line hanger
Power line
Cover of packaging
bolt hole
Water inlet valve joint
Drain pipe joint
Packaging bolt
Packaging rod
11. Application of Detergent Dispenser
Box
Please use foamless or low-foaming washing power suitable for
full-automatic roller-type washing machine.
Washing power dosage refers to the using instruction of washing power.
Excessive washing power will result in heavy foaming and easy
overflowing, thus impacting dissolution of washing power and bringing
difficulty in poaching.
The highest level of softener shall not exceed the MAX mark on the
siphon cap.
In order to achieve the optimal washing effect, it is recommended that
softener is placed into the dispenser box after being diluted by water at
the proportion of 1:1. Excessive softener will damage artificial fiber.
Softener dosage refers to the using instruction of softener.
After procedure running is finished, it is normal that some water is left in
the dispenser box, because the water is supplementing water or
condensate water in the procedure running process.
The handle of the dispenser box is concave and is easy to accumulate
dust, thus please use a piece of cloth to wipe and clean it.
Put liquid softener
Siphon cap
Put washing power
Accessories
12.
Drying
The washing machine is provided with the function of drying ramie cotton clothes, chemical fiber clothes and
the like, can automatically judge the dry and wet degree of clothes and timely end the drying procedure. The
function is available under the mode of accurate washing and has the following 4 modes to be selected:
Strong drying: suitable for dying ramie cotton clothes and the like.
Weak drying: suitable for drying chemical fiber and other easily damaged clothes.
Ironing：dried clothes can be directly ironed by an iron after being taken out.
Timing: users can set the drying time on their owns as needed, with the selective time range of 30 minutes, 60
minutes, 90 minutes and 120 minutes. The four modes can be selected by pressing the “Drying” key.
In drying, please notice:
Whether clothes can be dried, which depends on its material. Before drying, please ensure that clothes are
suitable for washing machine drying.
Before drying, please ensure that the faucet has been opened and it must have cold water.
Dehydrated clothes shall be firstly taken out from the roller and unfolded in a shaking manner, and then are
put into the roller for independent drying.
If excessive clothes to be dried are put at one time, not only the drying effect is not good, but also the clothes
are easy to crease, and the real drying time may be longer than the setting time.
The time of drying fewer clothes or thin clothes may be less than the setting time.
When the weak drying procedure is selected, it is normal that the running time is longer.
In order to reduce the temperature in the roller and prevent scald, cooling and temperature reduction shall be
conducted in the roller before the washing machine finishes drying operation. It is normal that tine displayed
on the display screen remains unchanged for a certain time.
Other Functions
(Applicable to Drying models)
Water inlet pipe assembly Drain pipe Drain pipe clamp
Wrench Manual
6
Drain pipe bracket Strapping tape
Cancel or Re-select Procedure during the Operation
If the children lock function is started, the following operation can be carried out after the children lock is
unlocked.
If the operation modes (washing mode, washing/drying mode and drying mode) or washing procedures
(ramie cotton, chemical fiber, etc) are required to be reset, press the “Power” key for 2 seconds to shut down
the machine, and then re-press the “Power” key to start the machine, in this way, the needed operation modes
and washing procedures can be reset.
Under accurate washing mode, if only the washing parameters are needed to be reset, slightly press the
“Start/Pause” key to reset the washing parameters (including washing time, poaching times, dehydration time,
dehydration rotation speed, but resettable parameters are required to be selected according to the real
running process of the procedure) as needed, , and then re-press the “Start/Pause” key to start the procedure.
15
4
2
7
6
1
3
5
Operation Steps
Disassembly of Packaging and Trans
(Take the machine with the drying function for an example)
Connect the
water inlet
pipe and open
the faucet
Insert the power
plug into the
power socket
Press the “Start/Pause”
key to start the
procedure
Correctly
place the
drain pipe
Press the power
key to start the
washing
machine
Open the door of
the washing
machine, put
clothes therein,
and close the door
porting Parts and Adjustment of Feet
Disassembly of Packaging and Transporting Parts
Packaging rods, packaging bolts and accessories are
used for fixing the internal components of the washing
machine during the transportation, and shall be
completely disassembled before use.
Firstly, the two packaging rods are dismounted and
then the three packaging bolts are disassembled, and
the positions thereof are shown in the Figure 1.
The specific operation is as follows:
Firstly the two packaging rods are disassembled from
①
the washing machine through a screw wrench or a
No. 18 wrench, and then packaging cushions are
taken out. The arrow in the Figure 2 shows the
disassembly direction.
Next the three packaging bolts are disassembled
②
from the washing machine through the screw wrench
or a No. 13 wrench, and then packaging sleeves are
taken out. The arrow in the Figure 3 shows the
disassembly direction.
The covers of the p
③
ackaging bolt holes are clamped
into those holes left after the packaging rods and the
packaging bolts are disassembled, shown as the
Figure 4.
Please properly keep the disassembled packaging
and transporting parts for future use in case of
moving and machine transportation.
Please ensure that the packaging and transportation
parts are assembled prior to machine transportation.
Packaging bolts
Packaging rods
Figure 1
Packaging
cushions
Packaging
sleeves
Packaging rods
Figure 2
Packaging
bolts
Figure 3
Covers of
packaging
bolt holes
Figure 4
Intense
Delay
Added Water
The needed procedure can be selected through the procedure selecting
ring, and washing time, poaching times, dehydration time,
g time (available for the machine with the drying
tdryin
function), heating temperature, dehydration speed and other functions can be
adjusted through the function selecting key on the control panel.
As for the machine without the drying function, please don’t select the drying function
Note：
(time) ,the load function can be selected.
Rinse Spin
Wash
Minutes
Wash Rinse
Times MinutesMinutes
Spin
Remaining Time
Strong Drying
Weak Drying
Ironing
Dry
Dry
Delay Time
Degree
Temp
Rotation
Speed
Cotton
Synthetic
Wool
Delicate
Duvet
Underwear
Drum clean
Mix
Quick
Night
Rinse
Spin
Dry
Airwash
Power
Adjustment of Feet
When the washing machine is even, the noise and
the vibration are reduced, thus please ensure that the
washing machine is adjusted evenly before use.
① please loosen the lock nut through a wrench
among those accessories.
② Adjust the level of the washing machine by
adjusting the heights of the feet.
③ After the feet are evenly adjusted, the lock nut is
screwed along the locking direction through the
wrench.
Locking direction
Lock nut
Feet
714
6.
Preparation before Using
Please install and adjust the washing machine
according to the Manual to ensure that you can
safely and correctly use it.
Connection of the Water Inlet Pipe
Importance: Use a new water inlet pipe, not reuse a used water inlet pipe.
1
Connect the Water Suppy System
Screw the terminal nut cap of the water inlet
pipe to ensure that the nut is fastened in place.
Note: The washing machine only can be
connected with a cold water supply system.
Preparation before Washing and
Referenced Clothing Weight
Preparation before Washing
Check whether the cleaning solution bottle and the disinfectant bottle on the table board of the washing machine
needs to be added with solution. (Applicable to HWD80-1406 and HWD1406 models)
Check whether clothes to be washed have special requirements and are suitable for machine washing and
drying, to avoid the deformation and damage of the clothes.
As for clothes spotted with much mud, please remove the dirt
before washing.
Please separate easily faded clothes from other clothes for washing.
Please take out coins, sand, hairpins and the like from the pocket
before washing.
Tie the necktie, buckle buttons, zip the zipper and sew the seam.
In order to prevent buttons of clothes from making sound, please turn clothes with buttons over before they are
put into the washing machine.
Washings shall not be excessive, please unfold and fluff up clothes before they are put into the
washing machine.
Please place small objects, easily wound and worn clothes into the washing bag for washing,
poaching and dehydration, so as to avoid the damage. When in use, the washing bag is not allowed to be
dehydrated independently, instead, it shall be dehydrated together with other clothes so as to avoid abnormal
vibration or non-drying.
Referenced Clothing Weight
Water inlet
pipe
Water
supply valve
Blending work clothes
(including a jacket and
trousers),
around 800g
Cotton bath towel,
around 300g
Cotton nightclothes
(including a jacket and
trousers),
around 300g
Cotton briefs,
around 70g
Blending shirt,
around 200g
Cotton socks,
around 30g
Cotton undershirt,
around 130g
Cotton jeans,
around 600g
138
8. Program Guideline
Validity of washing program for each type
Item
Cotton & Linen For washing and drying of cotton & linen
Chemical Fiber
Wool
Super soft
Down feather
Underwear
Mixture
Quick-washing
Night-washing
Separate
rinsing
Separate
dewatering
Memory
High-temperature
Sterilization
Separate drying
Air washing
Self-cleaning
of drum
Note ① Time displayed on the quick-washing panel excludes time for clothing distribution during dewatering. When quick-washing program is selected, don’t
add too much washing powder or softening agent so as to avoid insufficient rinsing.
Note ② “--” in above table indicates that the program is not availabe or suitable.
Note ③ Air washing is a program of drying mode, clothing
Note ④ for program with drying function, the corresponding max drying capacity is the maximum drying clothing allowable when “powerful drying” is selected.
Note ⑤ this program could sterilize Staphylococcus aureus and Escherichia coli with bacterial eradication rate of over 96%; with service time passing on,
sterilization function will be weaken in some degree.
The sterilization position is inside of the inner drum of washing machine.
Recommended clothing
For washing and drying of chemical fiber
For washing of machine washable wool
textiles
For washing of machine washable and
delicate clothing
For washing of machine washable and
down feather
For washing of machine washable cotton
underwear
For mixed washing of different clothing
For washing of cotton & linen and chemical
fiber which is not so dirty (note: ○1)
For night washing and drying
For speprate rinsing
For separate dewatering
For saving of individual program setting
For washing of cotton & linen textiles which
is suitable for high-temperature washing
(note: ○5)
For seprate drying
For sterilizing and removing bad smell from
dry clothing (note: ○3)
For cleaning of inner and external drums of
washing machine, add little washing powder
or special detergent, do not put clothing.
Is the
corresponding program
effective ?
Corresponding
washing/drying
8kg
3kg
2kg
2kg
2kg
2kg
5kg
3kg
8kg
5kg
8kg
max
capacity
5kg
3kg
3kg
3kg
5kg
4kg
4kg
Is
corresponding program
effective?
Correspond-
ing max
capacity
8kg
3kg
2kg
2kg
2kg
2kg
5kg
3kg
8kg
5kg
8kg
Is
corresponding program
effective?
Corresponding
max
washing/drying
capacity
5kg
8kg
3kg
3kg
2kg
2kg
2kg
2kg
3kg
5kg
3kg
3kg
8kg
5kg
4kg
5kg
8kg
4kg
Is
corresponding program
effective?
8kg
8kg
4kg 4kg
Little
Don’t put
clothing
in it
for sterilization and bad smell removing under this mode must have signs for drying available.
Don’t put
clothing
in it
Little
Don’t put
clothing
in it
Correspond-
ing max
capacity
8kg
3kg
2kg
2kg
2kg
2kg
5kg
3kg
8kg
5kg
8kg
8kg
8kg
Don’t put
clothing
in it
2. Connection of washing machine
1) Screw the nut of another end of water inlet on the intake
valve joint.
2) Tighten the nut of water inlet, and confirm whehter the nut
is tighten in place or not.
3. Check whether water inlet is connected well
1) Check whether the connection is firmly or not;
2) After the installation, turn on the tap to check whether there
is water leakage;
3) Check and confirm whether connection between water inlet
and tap is firmly connected or not before using the washing
machine each time.
4) Do not forcedly bend water inlet.
Drain pipe
Connection of water inlet
1) Take drain pipe and drain-pipe bracket out of the
accessory bag, and mount the drain-pipe bracket at the
end of drain pipe (with straight head), as shown in Fig. 1.
2) Take pipe clamp from the accessory bag, fix it by a large
clamp and put on the top end of the drain pipe (with
bend head), and then connect top end of drain pipe and
drain-pipe joint together, and fix it by a pipe clamp, as
shown in Fig. 2.
3) Connect drain pipe to water tank or vertical tube, and fix it
firmly by a strapping delivered, as shown in Fig
drain-pipe
bracket
Strapping
drain-pipe
joint
pipe clamp
912
7. Instructions To Control Panel and Program
Press this key to activate the function only before program
is started;
The washing time will increase accordingly after this
function is selected;
When the clothing is much dirty, it is recommended to
select this function so as to achieve better washing effect.
It can set time for termination of washing program;
Press this key under standby state, time for termination
of washing program could be set, appointment time
could be increased by 30 min upon once press. Available
appointment time ranges from 0.5 - 24hours. After
appointment function is seelcted, press “Start/Pause”
key to start the program, then appointment time will be
counted down.
Appointment time is the time for termination of program,
if operation time for washing program is longer than the
setting appointment time, the appointment time will not
be executed and the washing program will be directly
implemented;
After washing program is changed, this function will
automatically canceled.
Press this key under standby state, water level could be
increased for washing and rinsing, so as to achieve
better washing and rinsing effect.
“Powerful Cleaning”
“Appointment”
“High Water Level”
The icon is light after door is locked, and
now the door can’t be opened;
Press “Start/Pause”, if the washing
machine is compliance with the
unlocked conditions, the icon of door
lock will extinguish, and now the door
could be opened;
After the program finished operation, if
the unlocked conditions are met, the
icon of door lock will extinguish
automatically, and now the door could
be opened.
Note: whether keys on the control panel
could be selected depends on the
current program in operation.
“Door Lock”
Powerful clean
Appointment
High level
After the washing machine is started, in order to avoid child’s
improper operation or external interference to the program, hold
down “Powerful Cleaning” + “High Water Level” keys together for 3
sec during operation to start Child Lock function; conduct the
above operation again, the Child Lock function could be canceled;
After Child Lock function is started, all keys are ineffective except
for Power key;
After Child Lock function is started, if outage occurs during
program operation, Child Lock function will not be canceled
automatically, which still needs to be released by hand after the
machine is re-started.
Rinse
Wash
Wash
Dewater
Min
Times
Min
Rinse Dewater Load Tem. Speed
Remaining
time
“Child Lock”
Appointment
time
Degree Turn
Program Selection Key
Turning the knob to select a
suitable washing program;
Turning the knob to set the
operational parameters of
washing, rinsing, dewatering and
drying, as well as appointment
time, etc.;
For the type with drying function,
adjust clothing gear by manually
turning the knob during automatic
weighing. See Introdution on Page
16 for details.
Cotton & Linen
Chemical Fiber
Wool
Super soft
Down feather
Underwear
Self-cleaning
of drum
Note: the picture of control panel is the washing machine without the drying
function. See Program Guideline on Page 12 for the selectable
programs of the type with drying function.
Mixture
Quick-washing
Night-washing
Separate rinsing
Separate dewatering
Memory
High-temperature Sterilization
Power
After the program is selected, press this key, the
program will automatically run;
When the program is operating, press this key, the
program could be paused. If the unlcok conditions are
met, the door is unlocked and could be opened. Now,
user could add some clothing as necessary. Press the
key again, the paused program could continue its
operation.
Press this key under shutdown state, the washing
machine will start and enter into standby state;
When the washing machine is under starting state, hold
down this key for 3sec, the machine will shut down
power and enter into shutdown state.
Press this key under the standby or pause state (the
dewatering is not completed), the max rotation speed
could be selected during dewatering;
The max rotation speed of dewatering for each program
is different from each other;
When the display area of rotation speed above this key
on the screen is not light, it indicates no dewatering.
“Start/Pause”
“Power Supply”
“Speed”
Press this key under the standby or
pause state (the washing is not
completed), major washing time could
be set (excluding intake time and
heating time).
Select suitable washing time accoridng
to the dirty degree of clothing
Washing time available for each
program is different from each other;
When the washing display area above
this key on the screen is not light, it
indicates no washing.
“Washing”
“Rinsing”
Press this key under the standby
or pause state (the final rinsing is
not began), rinsing times could be
selected;
When the rinsing display area
above this key on the screen is
not light, it indicates no rinsing.
or above, the least rinsing time
isis three.
“Dewatering”
Press this key under the
standby or pause state (the
dewatering is not completed),
the high-speed whirling time for
last whirling could be selected;
Max dewatering time available
for each program is different
from each other;
When the dewatering display
area above this key on the
screen is not light, it indicates
no dewatering.
Note: corresponding to the type with drying
function, it is the Drying key.
Press “Drying” key under the standby state, the
different drying mode or time could be selected
according to the clothing to be dried;
Drying mode or time available for each program
is different from each other;
Max drying capacity corresponding to the
different programs is also different. See Program
Guideline on Page 12 for the details;
It is also applicable to the type without drying
function.
“Drying”
Note: corresponding to the type without drying function, it is the
Load key.
Press “Load” key under the standby state, the clothing gear could
be adjusted by hand according to the qunatity of clothing in the
drum, so as to save time, water and power;
When there is much clothing (over half drum), it is recommended
to select “L-3” or “L-4”; When there is less clothing (less than half
drum), it is recommended to select “L-1” or “L-2”; “---” indicates
automatic weighing.
Load gear range available for each program is different from each
other;
It is also applicable to the type with drying function.
“Load”
“Temperature”
Press this key under the
standby state, temperature
for water heating could be
selected during washing;
Max heating temperature
available for each program
is different from each
other;
When the temperature
display area above this
key on the screen is not
light, it indicates no
heating.
1110
Loading...