Haier XQG50-S1016 User Manual
Technica specifications
Model
Item
Main power
Max working current(A)
Water pressure(MPa)
Washing power(W)
Spining power(W)
Washing capcity(Kg)
Spinning speed(rpm)
Drying power(W)
Size(high,depth,width)mm
Weight(Kg)
XQG50-S1016
220V~/50Hz
10
0.05P1
300
700
5
1000/800/600
1000
850550595
78
Automatic Drum Washing Machine
XQG50-S1016
Operation Manual
Table of Contents
Before using
Names of parts---------------inside front cover
Matters needing attention-------------------1-3
Installation---------------------------------------4-5
Control panel--------------------------------------6
Operational functions-------------------------6-7
During using
Program selection-----------------------------8-9
Preparations-------------------------------------10
Washing methods------------------------------11
Additional information-------------------------12
Maintenance
Maintenance-------------------------------------13
Warning code------------------------------------14
Trouble shooting--------------------------------15
Warning-------------------------------------------16
Wiring circuit-------------------------------------17
Technical specification------------Back cover
Names of parts
Electronic system diagram
Detergent dispenser
Operation panel
Glass porthole
Power supply cable
Back plate screw(3)
Drainage hose
Table cover
Washer door
Drainage hose clip
Packing bolt(3)
Back plate
N
Motor
ABC
J
L
G
N
interference
eliminator
CNI CNJ CNG CNH
(L)
CNA-2
(N)
CNA-1
CNB CNC CND CNE CNF CN3-1 CN3-2
A1 A2 A3 A4
Driving Computer Board Line
A
JA8
5
JA7
Controlling
Computer
Board
K
DE FGHI
N
A:heater1 B:heater2(for drying) C:door engine(Micro-delay door switch)
D:water inlet electromagnetic valve for pre-washing Hġdrying fan motorG:pump
E:water inlet electromagnetic valve for main washing I:water level sensor
F:water inlet electromagnetic valve for drying J:water temprature sensor
K:drying temprature sensor
close
switch
lock
switch
Caution and warning symbols
For your safety, any instructions in this manual with this "Warning"
sign must be followed strictly.
For your safety and to prevent damage to the washing machine, any
instructions in this manual with this "Stop" sign must be followed
strictly.
This diagram may vary slightly with the layout of the washing machine you have just
purchased due to technical inprovements.
17
1.If the supply cord is damaged, it must be replaced by a special cord or assembly available
from the manufacturer or its service agent.
2.If a stationary appliance is provided, with a supply cord and a plug, the instructions shall
state that the appliance must be positioned so that the plug is accessible.
Note: this requirement does not apply if the appliance incorporates other means for
disconnection from the supply.
3.For washing machines with ventilation opening in the base, do not place directly on carpet
as it will obstruct the openings.
Matters needing attentionWarning
Safety
1. A separate earthed socket is required for the
power supply. After installation of the washing
machine the power plug must be accessible
during normal operation.
2. Pull the plug and not the electric cable
when unplugging the washing machine.
4.The instructions shall state that the appliance is to be connected to the water mains using
new hose-sets and that old-sets should not be reused.
Note: these instructions are not required if the hoses are permanently attached to the
appliance.
5.When connecting the washing machine for water supply and drainage, make sure the plug
is within reach.
6.Keep the vent outlet at the bottom of the washing machine free from being blocked.
7.To prevent danger, damaged electrical cables must be replaced by the manufacturer or an
authorised service agent.
3. Fuses in the power circuit should be rated for
15A. Contact a washing machine technician or
a desiganted service point for power cable
replacement.
5. Do not use flammable detergents or dry c-
leaning agents; do not use flammable sprays
near the washing machine; do not remove or
insert the plug in the presence of flammable
gas.
7. Do not allow children to play with the packing materials after unpacking.
4. For you safety, dry your hands before touching the washing machine and wear appropriate footwear.
6. The door of the washing machine becomes hot during the water heating or drying
process. Avoid contact with the door during
the heating or drying process. For safety,
keep children away from the washing machine.
16 1
Loading...