Mini magical child
Names of the parts.............the 2nd cover
Safety precautions .......................1
Introduction of the special functions.........3
Installation and adjustment ..................3
Install the water inlet hose............5
Preparatio n before w ashin g .............7
Put in the la und rie s .........................8
Add the detergent .......................9
Use the operation buttons ................10
Close the top lid .....................14
Washing fin i shed ... ... ... ... ... ... ... ... ... .1 4
Dis posal after w ash in g ....................15
Trouble shooting· Answer to question.....16
Packing list·After-sales
service .......................17
Specification.......................the back cover
Contents
Before using
Using process
·Please read this manual carefully before use.
·Please retain it attentively for future reference.
User's manual
Computerized Automatic
Washing Machine
“Hand-wash Type Mini
Magical Boy Instant Wash,
Much Cleaner”
XQBM23-12
Meaning and description of the symbols
Honorable users,
Thanks for your choosing Haier products.
Haier products integrate high-tech, precision frontier science and possess the best quality
among simila r products. To facilitate your operation, please read the manual carefully and
operate this machine according to it.
Haier's star-level
service is always accompanying you. No matter what problems you meet
in use please do not hesitate to contact us by the telephone number and address on the
certificate of warranty. We are at your service all the time.
Thanks again for
your choosing and introducing Haier products.
Haier-sincere forever!
Before Using
Before Using
Names of the parts
the end connecting to
the water inlet hose jointer
the end connecting to
the washing machine
jointer connecting the
water inlet hose and
the water faucet
Warning sign
Forbidding sign
Contents marked with that symbol
are related to the safety of the
product and the personal safety
of the users. Please operate in
strictconformity to the contents,
otherwise it may cause damage
of the machine or injure the
personal
safety of the user.
Contents marked with that symbol
are actions forbidden to perform.
Performing of those actions may
result in damage of the machine
or injure the personal safety of
the user.
Accessories
bottom plate
(one)
water inlet hose
(one)
Water inlet
hose jointer
(one)
ST4X16
tapping screws
(8 purchase)
Top lid
Control panel
seat
Inner tub
Pulsator
Control panel
film
Cabinet
Cabinet,lower
Adjustable foot
Power cord
Drain
hose
Handle
Back cover
Fixed foot(3 pcs)
Water level knob
Water inlet valve
Adjustable foot seam
1
Earth
Before Using
Before Using
Safety pr ecautions
Be sure to use three-phase power receptacle.
Ensure that the earth terminal of the power
receptacle is earthed reliably.
If the power line is bad, to avoid risk it is required to have it replaced by the technicians
of our special shop or our agent or the after-sale service department. Keep the pin of
the power plug clean.
Be sure to pull the plug off when
the
machine is idle or when cleaning the
machine.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do not use water hotter than 50℃.
In case the washing machine is installed
on ground with carpet, do not block
the
ventilation hole with carpet.
soft items
The ventilation holes
at the bottom
Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.
Do not wash
water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
50 C
2
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
The handicapped or children
without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
Before Using
Before Using
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.
e
rPtol
h
n
nT
i
e
r
3
The largest allowed slope of the shank base of the machine is 2°. The slanting or
rough ground will result in unstable running or stoppage of the machine. Please
adjust it with following methods:
Confirm it's horizontal:
Adjust the adjustable foot:
Hang the lead line to confirm if it is horizontal.
<2
Install the bottom plate
After you open the package, please lean
the washing machine gently down on soft
items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of
the machine with the eight screws by
a cross screwdriver, then lift the machine
up gently. See to the figure:
Adjust the installation position
soft items
Bottom plate
Screw
Loosen
Fasten
High
Low
adjustable nut
adjustable foot
Before Using
Before Using
Introduction of the special functions
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Back
Front
1.To twist the adjustable foot, please first
lift up the side of the foot slightly, loosen
the adjustable nut, and twist the foot.
2.Fasten
the nut after adjustment.
Hand-wash type wash:
The inner tub and pulsator rotate to opposite
directions during washing to form current like the
hand-wash moving. At the same time the washing
effect is improved significantly because the wall of the
inner tub also acts in washing.
4
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
2.Do not ramp or press the drain hose.
3.If the drain hose is too long, cut
it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
4.If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 30mm, and the length shall
not exceed 1.5m.
If the extra hose is too long, cut it
either at A or at B point.
1.Lean the machine down gently with the front
surface facing the ground. Loosen the eight
screws by a cross screwdriver.
3.Extend the drain hose from the left side. Push the
drain hose into the groove with hands.
4.Install the bottom plate (as per indicated before),
then lift the machine up gently.
2.Pull out the drain hose from the groove at the
right side.
Back
Front
Bottom plate
Soft item
Use groove at
this side after
direction changing
Page 3
Push the drain hose
into the groove with
hands at this point
<10cm
> 26mm
<1.5m
BA
Before Using
Before Using
How to change the direction of the drain hose
Usage of the drain hose
The drain hose shall drain smoothly
5
Water faucet,suitable
Water faucet,not suitable
It is required that the front end shall be longer than 10cm.
The outlet end surface of the faucet shall be flat and smooth. If not please file it
to avoid leakage.
2.Loosen the screw till the water faucet can be accessed. Put the jointer of the water
inlet hose on the faucet. See to Figure 2. (If the faucet is too large and the jointer can
not be set on the water faucet, please loosen the four screws
and take out the
bushing in the jointer. See to the figure.)
1.Press the lower end of the lock lever and push down the slider. Take off the water inlet
hose jointer from the water inlet hose component. See to Figure 1.
Remarks: Before installation, the threading is
4mm above the upper surface of
the nut. After installation, the threading is 2mm above the upper surface of the
nut. See to Figure 6.
4.Take off the nameplate. Twist the fastening nut as per the indication of the figure to
seal up the outlet end surface of the
faucet. See to Figure 5.
3.Fasten the four screws evenly. See to Figure 4.
>10mm
Outlet end surface
Nut
About 4mm before twisting
About below 2mm after twisting
Screw
Screwdriver
Mark label
Liner
Figure 2
Figure 5
Figure 1
Figure 4
Figure 3
Figure 6
Slider
Water inlet pipe jointer
Water inlet pipe
Locking lever
Before Using
Before Using
Install the water inlet hose
Confirm the water faucet
Connection between the water inlet hose jointer and
the water faucet
6
1.Do not take off the water absorption
cushion. Please check if the cushion
is dropped or damaged before each
usage. If it happens please contact
our after-sale department immediately.
2.Put the nut of the water inlet hose on
the valve jointer.
3.Fasten the nut. Swing
it gently to
confirm if it's suitable.
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then
pull of the water inlet hose. If the machine is used
more than once every week, the jointer of the water
inlet hose can be
kept on the faucet to prevent
damaging the fixing screw.
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if
the connection between the jointer
of the water inlet hose and the water
faucet, and the installation of the
water inlet hose are firm, so as to
prevent dropping from improper
Installation position.
1.Push down the slider. Insert the
water inlet hose into the jointer.
2.Hang the lock lever
to the jointer.
Release the slider till a click
sound is heard.
Locking lever
Slider
Wat er absorption cushion
Nut of the water inlet hose
Jointer of the water inlet valve
Slider
Jointer of the
water inlet hose
Locking lever
Before Using
Before Using
Connection between the water inlet hose and the
washing machine
Connection between the jointer of the water inlet
hose and the water inlet hose
Check the connection between the jointer of the
water inlet hose and the water faucet
Dismantle the water inlet hose
7
Confirm if
there's special
requirment for
the laundries.
Clear the pocket.
Take out the
coins , sand,
hairpins etc.
Fasten the
buttons and
zippers.
When the pulsator
is running , the
buttons of the
laundries may
cause noise. For
the sake of
discretion,please
put the laundries
with buttons into
other laundries.
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is
earthed reliably . Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
3.Put down the
drain hose.
The quantity of
the laundries
shall not exceed
the rated value.
The big laundries
like the jeans
shall be put in
loosely.
Using process
Using process
1 Preparation before washing
Pay attention to followings before washing the laundries
8
Reference weight of the laundries:
working suit（up,down）
jeans（about 800g）
The capacity of washing and spinning of the
machine refer to the largest weight of the standard
laundries under dry conditionthat can be washed or
spinned in one time. One time washing quantity
shall be lower than the rated capacity. The largest
capacity of this machine is 2.3kg.
The thickness, size,
type of the cloth will influence
the actual washing capacity. It is suitable for one
time washing to put in reasonable amount of
laundries and the laundries can be turned round in
washing.
Do not select "High" water level for laundries small
than 0.5kg, so as to avoid splashing of water.
To
wash thin laundries like the stocking, silk etc.,
please first put them into washing bag (which can
be purchased separately) before wash.
blending coat
（about 800g）
shirt
jacket
single bed sheet
socking
underpants
undershirt
pajamas
blanket
（cotton,about 900g）
（cotton,about
300g）
（cotton,about
800g）
（cotton,about 600g）
（blending,about 50g）
（cotton,about 70g）
（cotton,about 180g）
（about 200g）
Using process
Using process
2 Put in the laundries
（cotton,about 1120g）
9
How to use the w hitener
Fill water to decided level. Dilute
the whitener with container. Pour
it slowly into the washing tub.
Avoid using whitener on
laundries with color or pattern as
they are prone to lose color.
The whitener shall not touch the
laundries directly.
Refer to the user's manual for
the usage and quantity of
the
whitener.
For powder whitener, please
dissolve it before use.
Standard usage quantity of the detergent and water
quantity
How to use the washing
powder
Direct dissolved in the machine
1.Fill water to "Low" water level.
2.Add the power. Run for 30 seconds
to dissolve it completely.
3.Put in the laundries. Select
suitable water level.
The instant dissolving of the washing
powder:
1.Prepare warm water of 30℃and a
container.
2.Add the powder while stirring to
fully dissolve it.
The
powder is more prone to pollute
the laundries than the detergent.
Therefore please use it with proper
quantity.
It is suggested not to use high
sudsing detergent.
Different washing powders have
different dosage. Please refer to the
usage manual of the washing powder
for the details.
Laundries
quantity(kg)
Water level Water quantity
Common powder
(Add 40g in each
30L water)
1.0~2.3
0.5~1.0
Below 0.5
High
Medium
Low
About 20L About 25g About 15g
About 15L About 20g About 12g
About 12L About 16g About 10g
Using process
Using process
3 Add the detergent
Concentrated
powder
(Add 25g in each
30L water)
R
XQBM23-12
10
a.
Mode and meaning of the indicator light
Flashing: indicate the running program
Flashing rapidly: indicate abnormal condition
On: indicate the program about to run, or
indicate the selected mode
eiProcedure s lect on
One or more out of the five procedure
programs are available for your option:
quick, twice wash, wash, rinse, spin
QUICK
TWICE
WA SH
WASH
PROCEDURE
SELECTION
Using process
Using process
4 Use the operation buttons
Description of the function of the buttons
11
Push the "On/Off" button to
switch on the power.
When the power is on, push it
again to switch off the power.
"Power On/Off"button"Start/Pause"button
"Water level select"button
Water level
select
Select or adjust the water level
High
Add water
Low
Medium
After the power is switched on,
push it to start the machine
During working, push it to
pause working.
During pause, push it to
resume working.
Description：
1.Push the power button to switch on the
power. If the machine is idle for 10 minutes,
the power will be switched off automatically.
2.In usage, please first push the "power
switch" button,
then push the "procedure
selection" button. After selection, adjust the
water level. Finally push the "start/pause"
button to start the machine.
Using process
Using process
SPIN
RINSE
START
PAUSE
POWER
ON/OFF
1210
12
2
4
1
R
XQBM22-12
1210
12
开启电源后，洗衣机自行设定“洗涤漂洗脱水”过程选择，此为常用标准
程序。如果选用其它过程程序，按动“过程选择”按钮，选择速洗、浸泡、
洗涤、漂洗、脱水程序的一种或几种，可参照“过程选择选择方法”进行
选择。
第13页
3
After switching on the power, the machine will set to standard program
automatically including "wash-rinse-spin". To select other program, push the
"Procedure selection" button to select one or more programs among "quick wash"
"twice wash" "wash" "rinse" "spin". After the washing machine starts running
program, if you need to change the
procedure, please switch off the power and
restart the washing machine to make new selection. Refer to the "Procedure
selection method" for the selection.
Page 13
b.
R
CRPOEDUE
O
SELECTI N
POWER
ON/OFF
High
Add
water
Water level
switch
Low
Medium
QUICK
TWICE
WASH
WAS H
RINSE
SPIN
PROCEDURE
SELECTION
START
PAUSE
POWER
ON/OFF
Using process
Using process
Steps of using the operation buttons
and description of the steps
1 Push the "Power On/Off" button to swit ch on the
power
2 Push the "Procedure selection" button to select
the suita ble procedur e pr ogram
13
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use the "twice wash" program for
the woolen laundries.
Was h the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water
level.
Selection method of the procedure programs
Time list of each program (minute)
Times of pushing
the "procedure
selection" button
If you push the "Procedure selection" button for 7 times, it will resume the original
mode, and it will circulate like that.
If you select the "Quick wash" program, you have to set the full procedure of wash,
rinse and spin. The procedure can not be selected.
0
1
2
3
4
5
6
Selected procedure
program
Applicable procedure
Contents (the lighted indicators indicate
the programs about to run)
Wash, rinse, spin
(standard program)
Rinse, spin
Spin (spin after drain)
Wash (the washing
liquid remains in the
Wash, rinse (the rinsing
liquid remains in the tub)
Repeat using the washing liquid
Wash rinse
spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse spin
Wash rinse
spin
Twice
wash
Twice
wash
Twice
wash
Twice
wash
Twice
wash
Twice
wash
Twice
wash
Quick
wash
Quick
wash
Quick
wash
Quick
wash
Quick
wash
Quick
wash
Quick
wash
Twice wash, wash,
rinse, spin
Quick wash, wash,
rinse, spin
When the common laundries
need washing, rinsing and
spinning
Repeat using the washing liquid
When the laundries need rinsing
and spinning after manual
washing
When the laundries need
only
spinning after manual washing
(first drain then spin)
If the laundries are very dirty, or
the sleeve and collar are dirty,
first soak then wash
When quickly wash the light
dirty laundries
Attention
Standard
Program
Twice wa sh
Quick
Soak (min)
Was h (min)
About 8~15 About 35~42About 4
About 4
About 4
About 16~30
About 68~82About 25
About 5~9 About 21~25
Rinse (min/time) Spin (min) Total time (min)
Rinse twice with stored
water, about 6
Rinse twice with stored
water, about 6
Rinse once with stored
water, about 3
Using process
Using process
14
Washing time: it can be adjusted automatically according to the water temperature.
Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing
time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing
When
selecting "twice wash" program, first soak for about 20 minutes, pre-wash for about 8 minutes, then
soak for about 5 minutes, then do washing, rinsing and spinning. The wash time in the list includes the prewash time.
5 Close the top lid
Three water levels available according to the laundries quantity: High; Medium;
Low.
After the water inlet under set water level, if higher water level is needed, please
first turn the knob to "Add water", then turn back to needed water level. The
washing machine will fill water to the new water
level.
After the water inlet as per the preset water level, in case additional water
quantity is required, please first set the button to the "Add water", push and hold
it to perform automatic water inlet. When it reaches the suitable water level, you
can turn it to the needed water
level.
Page 9
When the washing is finished, the three
indicators of "wash" "rinse" "spin" are
all on. The power will be switched off
automatically about 10 minutes after
the finishing of the washing
If you open the top lid, the machine
will stop working except for water
filling and spinning
It beeps to
indicate
the
finishing of
washing
START
PAUSE
14
Using process
Using process
3 Adjust the "water level selection" knob to select
suitable water level
4 Press the "Star t/Pause" button
6 Washing finished
*
*
*
*
15
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
The filter screen of the water inlet valve is likely to be blocked by foreign
materials and influence the water inlet. Please
clean it with brush every two
months.
1.After washing, close the water faucet. (If needed, you can dismantle the water
inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water
completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
Wipe off the water drops on the surface of the machine and inside the tub. Open
the top lid for some time (about 1 hour), then close the top lid.
After using, please clean the lint and foreign materials of the
lint filter etc. in time.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Using process
Using process
7 Disposal after washing
16
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending it to
repair. If there are real breakdowns, please come to the special maintenance department or
after-sale service department of our company. Do not repair it by yourself.
There may be some water flowing out of the
drain hose in the first use of the machine.
It is the water remained in the factory
inspection of performance.
Common phenomena
Phenomena
Explanation
The spinning is intermittent when it starts.
Push the "Procedure selection" button to
select "Spin", but it doesn't work.
In the final spinning, it stops and displays
"Rinse", and starts water inlet.
Balance the laundries to avoid slanting.
The program is setting the drain time. Some
time is needed before it starts spinning.
It is because that the laundries are slanting
to one side, and the safety switch acts. After
water inlet and stirring, the slanting will be
removed and the spinning will work.
Phenomena The reason How to settle
In wash/rinse/spin, the machine
stops running. (The "wash" "rinse"
"spin" indicator flash quickly)
The top lid is not closed
Is the drain hose put down?
Is the drain hose blocked by
foreign material?
Are the laundries put slantingly?
Are the laundries slanting in
spinning?
Is the machine slanting?
Is the machine slanting?
The water faucet
is not open
The water inlet valve is blocked
The water pressure is too low
and the current is too small
Is there power failure?
Is the power plug loose?
Is the jointer screw of the water
inlet hose is loose or twisted
awry?
The water faucet leaks
There's abnormal sound inside the
machine
The machine does not act
The program pauses after about 8
minutes of water inlet (the
indicators of "wash" "spin" flash
quickly)
The draining does not work, or the speed
of draining is too slow (the indicators of
"wash" "rinse" flash)
The safety switch acts. The
spinning can not work (the
indicators of "wash" "rinse" flash
quickly)
Close the top lid
Put down the drain hose. Open
and close the top lid once.
Clean the foreign material.
Open and close the top lid once.
Re-order the laundries. Close
the top lid.
Level the machine
in right
position. Open and close the
top lid once.
Open the water faucet. Push
the "Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
Use it when the power is on.
Insert the power plug tightly.
Level the machine properly.
Re-order the laundries.
Fasten the jointer screw
properly.
Trouble-shooting·Answer to question
Trouble-shooting·Answer to question
17
User's manual
Name
Components of the water
inlet hose
Bottom plate
Tapping screws ST4x12
One
One
One
Eight
One
Quantity
Inside the document bag
Storage position
Computerized Automatic
washing machine
Inside the accessory bag
Inside the accessory bag
Between the upper cush ion of the wash ing ma ch in e
pack age and the upper seal of the package ca rton
Packing list
Executive standard: GB/T4288-1992 Household Electric Was hing Machine
Address: Hai er Pa rk, Hai er Roa d, Qingdao Hi-tech Industrial District, Qingdao, Chi na
Rated voltage frequency
Rated washing / spinning capacity
Water level/Water quantity (about)
Max water consumption
Injection pressure
Rated washing power
Rated spinning power
Weight
Dimension
2.3kg (weight of standard dry cloth)
High/20L, Medium/15L, Low/12L
About 60L (High water level; Standard program)
0.03Mpa-0.78Mpa
210W
190W
About 16.5kg
L 425mm W 416mm H 698mm
220V~ 50Hz
Model
XQBM23-12 Computerized auto matic washin g machin e
Specification
Specification
Haier Group Haier International Electric Appliances Co., Ltd.
Loading...