Automatic Washing Machine
This manual is for
XQB50-10A
User's manual
Please read this manual
carefully before using.
Retain it for future reference.
Contents
Names of the parts.............the 2nd cover
Safety precautions .......................1
Installation and adjustment ..................3
Install the water inlet hose............5
Using process
Preparation before washing .............6
Put in the laundries .........................7
Put in the detergent .......................8
Use the operation buttons ................9
Close the top lid ........................13
Finish washing ............................14
Disposal after washing ....................14
Trouble shooting Answer to questions....15
Packing list ..................................16
Specifications................................17
Names of the parts
Before Using
Before Using
Top lid B
Detergent box
Lint filter
Control panel
Control panel
film
(Installed by user)
Filter cover
Inner tub
Pulsator
Cabinet
base frame
Top lid A
Cabinet handle
Drain hose
Adjustable foot
Sop mat
water valve
Power line
back cover
fixed foot (3)
Accessories
Bottom plate
(one)
water inlet hose
(one)
Drain hose
Drain hose
support
tapping screws
ST4X16
(eight)
Lint filter
(two)
Meaning and description of the symbols
Contents marked with that symbol
Warning sign
Forbidden sign
are related to the safety of the
product and the personal safety
of the users. Please operate in
strict conformity to the contents,
otherwise it may cause damage
of the machine or injure the
personal safety of the user.
Contents marked with that symbol
are actions forbidden to perform.
Performing of those actions may
result in damage of the machine
or injure the personal safety of
the user.
Safety precautions
A tierra
Before Using
Before Using
Please plug the plug on special 120V AC
receptacle.Please guarantee that the
earthing wire is ear-thed reliably.
Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.
Keep the pin of the power plug clean,if the power plug is polluted with dust,
please wipe with dry cloth carefully.
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle,when
moving the machine,or when cleaning
the machine.Do not use wet hand to insert or pull out the power plug.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do Not put wet laundries on the control panel.
In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.
The ventilation holes
at the bottom
soft items
Do not use water hotter above 50 C .
Do not wash water-proof laundries like the raincoat,
bike covers etc. to avoid abnormal vibrations in spinning.
Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the
plugging into the receptacle is loose, do not use the plug any more.
Before Using
Before Using
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.Do not let the children
climb the washing machine.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not decompose, repair or alter the
machine by yourself.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
Petrol
er
inn
Th
The handicapped or children without
care shall not use the machine.
To prevent your laundries and washing
.
machine from damage,be sure to take
out all of the foreign materials from your
pocket,such as coins,buttons,sand or
hairpins etc.
Before washing,please check if the water
tap is open ,and if the water inlet pipe is
connected properly.
It is suggested to use low-foaming washing powder
Keep the machine away from direct
sunlight and heat source like the heater.
To prevent the lint in the tub from blocking
the cascade outlet and influencing the
cascade effect, please keep the lint filter
in good condition, and install it to proper
position during washing.
Before Using
Before Using
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the lint filter
1.Press downward to assmble.
2.Pull upward to detach.
Pull down
Pull down
Put up
Put up
Install the bottom plate
After you open the package,
please lean the washing
machine gently down on soft
items ( like the towel cloth,
blanket, etc. ). Install the
bottom plate to the bottom of
the machine with the eight
screws by a cross screwdriver,
then lift the machine up gently.
See to the figure:
Adjust the installation position
Back
Front
Soft items
Screw
Bottom plate
The largest allowed slope of the
shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
2.Fasten the nut after adjustment.
Loosen
High
adjustable nut
Fasten
adjustable foot
Low
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.put the drain hose up to suitable position. Do not put it
on ground
2.Do not step on or press the drain hose.
Notes: the highest point of drain pipe should be higher than
the water level of washing tub for avoiding to siphon
phenomenon during drain.
The highest point
Before Using
Before Using
0.8m<H<1.2m
Before using
Install the water inlet hose
Before using
Install the water inlet hose
1. Insert a new flat washer into each end of the inlet hoses. Firmly put the
washers in the coupling.
Note:
Use the new hose sets supplied with the washer.
Any other old hose sets should not be used.
You may have to use pliers to tighten the coupling.
Do not over tighten because you may cause
damage to the valve.
2. Connect the water inlet hoses to the water faucet.
3. Connect the other ends to their respective cold and hot water inlet valve
located at the rear of the washer
Nut of the water inlet hose
Water absorption cushion
Jointer of the water inlet valve
4.Fasten the nut. Swing it gently to confirm if it's suitable.
Check the connection between the water inlet
hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap,
and the connection between the water inlet hose and
washer are firm, so as to prevent dropping from
improve Installation position.
Take down the water inlet hose
1.Close the water tap.
2. Pull off the water inlet hose from the water tap
and washer
1 Preparation before washing
Preparation before washing
1. Connect the water inlet hose.
2. Confirm that the washing machine is earthed
reliably. Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3. Hang up the drain hose.
Pay attention to followings before washing the laundries
Using process
Using process
Confirm if
there's special
requirment for
the laundries.
A. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust.
For the parts with heavy soil, please apply detergent on them in advance, which
can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before
putting in.
f. Do not put those laundries polluted by chemicals into the washing machine directly.
Clear the pocket.
Take out the
coins , sand,
hairpins etc.
Fasten the
buttons and
zippers.
The quantity of
the laundries
shall not exceed
the rated value.
The big laundries
like the jeans
shall be put in
loosely.
When the pulsator
is running , the
buttons of the
laundries may
cause noise. For
the sake of
discretion,please
put the laundries
with buttons into
other laundries.
2 Put in the laundries
The capacity of washing and spinning of the
machine refer to the largest weight of the standard
laundries under dry condition that can be washed
or spinned in one time. One time washing quantity
shall be lower than the rated capacity. The largest
capacity of this machine is 5.0kg.
The thickness, size, type of the cloth will influence
the actual washing capacity. It is suitable for one
time washing to put in reasonable amount of
laundries and the laundries can be turned round in
washing.
Do not select "High" water level for laundries small
than 0.5kg, so as to avoid splashing of water.
Using process
Using process
Reference weight of the laundries:
working suit up,down
cotton,about 1120g
blanket
cotton,about 900g
pajamas
shirt
cotton,about
300g
jeans about 800g
blending coat
(about 800g)
jacket
cotton,about
800g
single bed sheet
cotton,about 600g
undershirt
cotton,about 180g
underpants
cotton,about 70g
Socks
blending,about 50g
3 Put in the detergent
Inlet for concentrated washing
powder and detergent
Detergent box
How to use the whitener
Fill water to decided level. Dilute
the whitener with container. Pour
it slowly into the washing tub.
Avoid using whitener on
laundries with color or pattern as
they are prone to lose color.
The whitener shall not touch the
laundries directly.
Refer to the user's manual for
the usage and quantity of the
whitener.
For powder whitener, please
dissolve it before use.
How to use the washing
powder
Direct dissolved in the machine
1.Fill water to "Low" water level.
2.Add the power. Run for 30 seconds
to dissolve it completely.
3.Put in the laundries. Select
suitable water level.
The instant dissolving of the washing
powder:
1.Prepare warm water of 30 and a
container.
2.Add the powder while stirring to
fully dissolve it.
Put in the prorer quantities detergent
according to the water level and the
laundries quantities .
It is suggested not to use high
sudsing detergent.
Washing powder with poor quality or
long time storage maybe caked.
Please pay attention to cleaning the
detergent box in time
Using process
Using process
Standard usage quantity of the detergent and water
quantity
Laundries
quantity(kg)
Above 3.5
2.0~3.5
1.0~2.0
Below 1.0
Water level Water quantity
HIGH
MEDIUM
LOW
VERY LOW
About 48L
About 37L
About 30L
About 20L
Common powder
(Add 40g in each
30L water)
About 64g About 40g
About 49g About 36g
About 40g About 25g
About 27g
Concentrated
powder
(Add 25g in each
30L water)
About 17
Using process
4 Use the operation buttons
Description of the function of the buttons
a.
Using process
SURPLUS(MIN)
To indicate -- during sensing.
To indicate remaining min. During
program running.
To indicate remaining reserved
time (hrs) during reservation period.
To indicate fault symbols for abnormal
conditions (see page 15)
Page 15
STANDARD
HEAVY
GENTLE
QUICK WASH
WASH
SPIN
" WATER LEVEL"button
The user selects a suitable water level
depending on the load.
PROCEDURE STATUSPROGRAM STATUS
SOAK
WASH
RINSE
SPIN
PROGRAM
WATER LEVEL
"PROGRAM/ " button
Press
"PROGRAM/RESERVATION " button
you can select one or several of
StandardJ eans Gentle,Quick,R
Press
"PROGRAM/RESERVATION "
over 2 seconds, the program
of peservtion.
reserved hrs to the wash cycle end. The
indicator flashes to indicate in-reservation.
RESERVATION
, , inse and Spin
you can select
the N tube displays the
ixie
RESERVATION
programs
button
.
"POWER ON/OFF"button
Press "Power On/Off" button to connect
power supply.
After power is connected, pressing this
button will cut off the supply.
"START/PAUSE"button
After the power is switched on, press it to
start the machine
During working, push it to pause working.
During pause, push this button to restart
and continue operation.
Using process
Using process
XQB50-10A
START
PAUSE
Remarks: After pressing "Power On/Off" to connect power supply, if the washing machine
lasts idle more than 10 min, it would automatically shut off the supply.
POWER
ON/OFF
Using process
Using process
b.
Operating procedure and explanations for the
buttons
PROCEDURE STATUSPROGRAM STATUS
PROCEDURE STATUSPROGRAM STATUS
STANDARD
STANDARD
HEAVY
GENTLE
GENTLE
QUICK WASH
QUICK WASH
WASH
WASH
SPIN
SPIN
SOAK
SOAK
WASH
WASH
RINSE
RINSE
SPIN
SPIN
WATER LEVEL
WATER LEVEL
PROGRAM
PROGRAM
RESERVATION
RESERVATION
XQB50-10A
START
START
PAU SE
PAUSE
POWER
POWER
ON/OFF
ON/OFF
1 Press the "Power On/Off" button to switch on
the power supply
POWER
POWER
ON/OFF
ON/OFF
2 Press the button of "Program/Reservation" to select
a suitable full-automatic program
PROGRAM
PROGRAM
RESERVATION
RESERVATION
After switching on, the "Standard" program will be the default. If other full-automatic program is
desired, you can press the button "Program" to get the corresponding indicator on. Refer to the
"Button of 'program'"paragraph on page 9.
Example: Use the "Quick" program for slightly soiled articles.
When "standard" or "Jeans" program is selected, the
washing machine will perform full-automatically
controlled fuzzy program to set water level, water flow and
wash duration according to the cloth nature and weight
Page 9
Attention
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use soak process for woolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure programs
Using process
Using process
Times of pushing
the"Program
select"button
0
1
2
3
4
5
Corresponding
program
Standard
JEANS
GENTLE
QUICK WASH
WASH
SPIN
Applicable procedure
When the common
laundries need washing
rinse and spin
If the laundries are very
dirty, or the sleeve and
collar are dirty, first soak
then wash
When the laundries
needs to be washed
carefully such as woolen
textiles or underwear.
When the laundries is
lightly soiled that needs
to be washed quickly.
When the common
laundries need only
washing
When the laundries need
only spinning after
manual washing
(first drain then spin)
Selected procedure
program
Wash(bb) Rinse(cc)
Spin(dd)
Soak(AA) Wash(bb)
Rinse(cc) Spin(dd)
Wash(bb) Rinse(cc)
Spin(dd)
Wash(bb) Rinse(cc)
Spin(dd)
Wash(bb)
Spin(dd)
Total Time
About 39~44
About 64~89
About 34
About 10
About 13~18
About 9
If you push the "Process selector" button for 6 times, it will resume the original
mode, and it will circulate like that.
Time list of each program (minute)
Program
Standard
Soak
(min)
/
Wash
(min)
About11~16About11~16
Rinse
(min)
Rinse twice,each about 3
Spin
(min)
About 6
Total time(min)
About 39~44
About
Jeans
Gentle
Quick
Wash
Spin
25~45
/
/
/
/
About10~16
About6
About3
About11~16
/
/
Rinse twice, each abut 3
Rinse once, about 2
Rinse twice, about 2
/
/
About 6
About 6
About 2
/
About 6
About 64~89
About 34
About 10
About 13~18
About 9
Using process
Using process
Total time: including the normal water inlet time, drain time, excluding the power off time. The
total washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing.
The Jeans program could combine the process of soak during which the washing
machine firstly soak for about 25~45 min after water filling and then begins to wash.
When "Quick wash" program is chosen, the washing machine would automatically set water
level and full processes of wash, rinse and spin.
3 Press the "water level" button to select suitable
water level
WATER LEVEL
After switching on the power, press the button "Water level" to select a water level according
to the load. Please refer to the paragraphs
and "Button of Water level" on page 9.
“Detergent standard dosages and water levels"
Page 9
4 Push the "Reservation" button to select
suitable reserve program
PROGRAM
PROGRAM
RESERVATION
RESERVATION
After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the
button to set a reserved wash program. Refer to "The button of Reservation" on page 9.
Confirm the reserve program
When "Reservation" becomes active, the nixie tube
displays the time to the end of the reserved wash cycle, and
the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
Page 9
the washing will finish
about 18 hours later
5 Press the "start/pause" button
"Reservation"
START
START
PAU SE
PAUSE
5 Close the top lid
When the machine working, if the
top cover is opened, the washing
machine will stop running and alarm.
Using process
Using process
6 Finish washing
The washing machine cuts off the power supply
automatically when wash cycle ends.
Disposal after washing
7
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence
your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
When washing, lint filter must be used
After using, please clean it in time.
Lint filter:
Pull upward to detach
1.
Clean
After Finishing wash
alarm automatically
Figure 1
2.Clean the lint
Put it in water and clean while it is still wet.
(See to Figure 1).
Press downward to assemble.
3.
The filter screen of the water inlet
valve is likely to be blocked by
foreign materials and influence the
water inlet. Please clean it with
brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol
Pull down
etc.
r
Alcohol
ne
Thin
Petrol
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
Put up
Pull down
Figure 2
Put up
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour),
then close the top lid.
Trouble shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending it to
repair. If there are real breakdowns, please come to the special maintenance department .
Do not repair it by yourself.
Phenomena The reason How to settle
Buzzing upon reservation starts,
Nixie tube indicates "E0"
The top lid is not closed
Close the top lid
No or slow drain, nixie tube
indicates
"E1" , buzzing.
Running pauses during spin,
nixie tube indicates
"E2”,
buzzing
Safety switch actuates, not
spin, (after self-correction
twice), nixie tube displays
"E3", buzzing
No or slow water filling (not
reaching the level in 15 min),
nixie tube indicates
"E4",
buzzing
The machine does
not act
Not wash
Not spin
There's abnormal sound
inside the machine.
Is the drain hose put down?
Is the drain hose blocked by
foreign material?
The top cover leaves open
Are the laundries put slantingly?
Is the machine slanting?
The water tap is not open
The water inlet valve is blocked
The water pressure is too low
and the current is too small
Is there power failure?
Is the power plug loose?
Does the water level arrive at the
set water level?
Is the power plug loose?
Is the top lid closed?
Are the laundries put orderly? Put the laundries orderly.
Is the machine slanting?
Is there metal material inside
the washing machine?
Are the laundries slanting in
spinning?
Put down the drain hose. Open
and close the top lid once.
Clean the foreign material.
Open and close the top lid once.
Close the top lid
Re-order the laundries. Close
the top lid.
Level the machine in right
position. Open and close the
top lid once.
Open the water tap. Push the
"Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
Use it when the power is on.
Insert the power plug tightly.
Affusion to the set water level.
Insert the power plug tightly.
Close the top lid
Level the machine properly.
Fasten the buttons and zipper
Reorder the laundries. Close the
top lid.
No water filling
The machine does not act.
(the indicators are off.)
Is the power plug loose?
If the water faucet is turned on?
If Power On/Off and
Start/Pause are pressed?
Is there power failure?
Is the power plug loose?
Insert the plug firmly
Turn on the water faucet
Press Power On/Off and
Start/Pause
Use it when the power is on.
Insert the power plug tightly.
Common phenomena
Phenomena Explanation
The spinning is intermittent when it starts.
Push the" / " button to
select "Spin", but it doesn't work.
There may be some water flowing out of
the drain hose in the first use of the machine.
While water filling in wash and rinse, the
pulsator pauses rotation
Wash pauses
PROGRAM RESERVATION
Packing list
Name
User's manual
Quantity
One
Balance the laundries to avoid slanting.
The program is setting the drain time. Some time is
needed before it starts spinning.
It is the water remained in the factory inspection of
performance.
To prevent splash during water filling.
Supplementary water filling 48 s after
sensor tests cloth material.
Storage position
Inside the document bag
Components of the water
inlet hose
Bottom plate
Drain hose
Drain hose support
Tapping screws ST4x16
Lint filter
Automatic washing machine
One
One
One
One
Eight
Two
One
Inside the accessory bag
Between the upper cushion of the washing machine
package and the upper seal of the package carton
Inside the accessory bag
Inside the accessory bag
Inside the accessory bag
Inside the accessory bag
Specification
Specification
Model
Rated washing / spinning capacity
Water level/Water quantity (about)
Max water consumption
Water inlet pressure
Rated washing power
Rated spinning power
Weight
Dimension
XQB50-10A
5.0kg
Lowest/20L Low/30L Mid/37L High/48L
About 144L (High water level; Standard program)
0.03MPa-0.78MPa
325W
285W
About 39kg
L 510mm W 500mm H 882mm
Loading...