Haier XQB 120-01 User Manual

Full Automatic Washing Machine

User's manual

This manual is for

HWM120-01/XQB120-01

Please read this manual carefully before using.

Retain it for future reference.

CONTENTS
Names of the parts............................ ....... .............. .......	.....1
Safety precautions .............................................. ....... ...........	2
Installation and adjustment ............................. ....... ..............	4
Install the water inlet hose.............................. ....... ..............	6
Preparation before washing ........................ ....... .................	8
Put in the laundries ........................................ ....... ...............	9
Usage of the detergent ............................... ....... ...... ............	10
Use the operation buttons ......................... ....... ...............	..11
Close the top lid ......................................... ....... .......... ......	..15
Finish washing ..................................... ....... .......................	..15
Disposal after washing .............................. ....... .............. ......	16
Trouble shooting Answer to question.................. ....... ...........	17
Packing list................................................. ....... ....... .............	18
Specification .................................. ............... ....... ................	18

Names of the parts

Top lid, I

Top lid, II

Detergent box Location of lint filter Control panel seat

Level meter Inner tub

Control panel film

Pulsator

Cabinet

Lower cabinet

Water absorption cushion

Water inlet valve

Drain hose hanging hole

Power cord

Handle

Drain hose

Back cover

Fixing foot (three)

Adjustable foot

Meaning and description of the symbols

Warning sign	Contents marked with that symbol are related to the
	safety of the product and the personal safety of the users.
	Please operate in strict conformity to the contents.

Forbidden sign	Contents marked with that symbol are actions forbidden
	to perform. Performing of those action may result in damage of
	the machine or influence the personal safety of the users.

Safety precautions

Please plug the power plug on special receptacle. Be sure to use three-pins power receptacle. Ensure that the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible.

In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hand. Be sure to pull the plug off and close the water faucet in following cases: power failure, delivering the machine, setting the machine idle or c l e a n i n g t h e m a c h i n e . D o n o t p l u g or pull the power plug with wet hand.

Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp it with heavy items. If the power cord and power plug are bad, or the receptacle is loose, be sure to have it replaced by the technicians of our special shop or our agent, or the after-sales service department for the sake of avoiding any risk. Keep the prong of the power plug clean. If dust is found on the power plug, please wipe it off with dry cloth.

	Do not put the machine at damp place like	Do not use water hotter than 50 C .
	the bathroom. Never wash it with water.

T h e v e n t i l a t i o n holes at the bottom

Soft object

In case the washing machine is installed on ground with carpet, do not block the ventilation hole with carpet.

Do not wash water-proof laundries like the raincoat,

bike covers etc. to avoid abnormal vibrations in spinning.

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

Safety precautions

Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children.

Do not decompose, repair or alter the machine by yourself.

Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine

Do not wash laundries with volatile materials (such as thinner, petrol etc.).

Benzene

The handicapped or children without care shall not use the machine.

Keep the machine away from direct sunlight and heat source like the heater.

The lint filter shall be kept in good condition, and installed to proper position. If the lint filter is lost or damaged, please contact the local after-sales service department of our company.

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.

Install the lint filter

	After opening the package, please take out the
	lint filter from the document bag and install it	Filter frame
	into the Filter frame of the inner tub. See to the right Figure.
		Lint filter

Adjust the Installation position

The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods:

Confirm it's horizontal

Hang the plumb to confirm it's horizontal

Confirm it's horizontal:

If the bulb of the level meter at the balance display position is inside the standard circle, it indicates that the machine is horizontal. Otherwise you need to a d j u s t t h e a d j u s t a b l e l e g o f t h e m a c h i n e .

Air bubble

Suitable Not suitable

Standard circle

Adjust the adjustable foot

(1)To twist the adjustable foot at the right front of the cabinet (front the sight of front), please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot.

(2)Fasten the nut after adjustment.

Loosen

High

adjustable nut

Fasten

adjustable foot

Low