1.5
Contents
Packing list..............................................................................................the 2nd cover
Identifications of parts
Safety precautions .................................................................................................2
Installation and adjustment ....................................................................................4
Preparation before washing ..................................................................................5
Washing capacity....................................................................................................6
Detergent usage......................................................................................................6
Washing Process ....................................................................................................7
Disposal after washing ............................................................................................8
Trouble shooting .....................................................................................................9
Specifications...........................................................................................................9
.............................................................................................1
Description of the symbols
1
Safety precautions
Please plug the washer into a
220V-240V a.c receptacle. Be sure
to use single-phase three pin
receptacle. Ensure the earthing
prong of the power receptacle is
earthed reliably. Use leakage
protector if possible.
Do not twist pinch or damage the cord.
If the cord or plug becomes damaged,
please contact the service agent or an
authorised technician.
Do not put the machine in damp places like
the bathroom. Never wash it with water.
Do not put wet clothes on the control panel.
If the washing machine is installed on
carpet, do not block the ventilation hole
with carpet.
soft items
Do not let the machine share one power point with other
electric appliances. If the power plug is damaged or
loose, do not use the plug any more.
The ventilation holes
at the bottom
Do not use water hotter than 50 C .
Do not wash water-proof items like
the raincoat, bike covers etc.
2
Safety precautions
Do not repair or alter the machine by
yourself.
Do not put any hot or heavy items on the
washing machine.
Do not allow children to use the washing
machine.
Do not wash clothes, with volatile
materials (such as thinner, petrol etc.)
3
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important for your safety and operation of the machine.
Adjust the installation position
The largest allowed angle of the
machine is 2 .
More than this will result in unstable
operation or stoppage of the machine.
4
Preparation before washing
Pay attention to the following before washing.
Look for the
care label on
your laundry
for special
washing requiÂrements
a.Separate non-colorfast clothes from those that are.
b.For laundry that are water resistant, please push them into the water with your hands
to soak.
c.For heavy soiled clothes,try to remove most of the loose soil before washing.
d.Do not put clothes polluted with chemicals directly into the washing machine.
e.Mend any torn garments or loose buttons as it may tear larger during washing.
Make sure you
have checked all
pockets for any
loose items.
Fasten all zippers,
hooks,buttons and
strings to make sure
that these items don't
snag on other clothes..
The quantity of
clothes shall not
exceed the rated
value.For large
clothes like jeans
should be put
they
in loosely.
,
5
6
Washing Process
1. Connect the water hose provided to the water mains
Install the water inlet hose
Insert the water inlet hose into the water-filling
entrance on the control panel.
NOTE
1.Confirm that the drain hose is properly
stowed before filling with water, or the water
will flow through the drain hose.
2.Inside the machine you will see water filling
levels-"1" "2" "3"and"MAX".
This relates to the amount of washing you are
using.Never exceed the "MAX"Mark!
3.Only use the new hose set provided.
2.Connect the power
Confirm that the washing machine is
earthed reliably. Then insert the power
plug into the receptacle.
Water inlet hose
Water-filling
entrance
3. Fill the machine enough with water
to mix detergent, put in your laundr y
and fill up water to the desired level.
4. Close the lid.
7
8
Trouble shooting
If you experience problems with your appliance,please pull out the power plug
before checking anything.The following table may help in troubleshooting.If
there is still a problem,return the unit to your supplier for help.
Phenomena
The machine
does not operate
There's abnormal
sound inside the
machine
Is there power failure?
Is the power plug loose?
Is the machine slanting?
Is there some foreign
objects in a tub?
Specifications
Water level/ Water quantity (L)
Water inlet pressure MPa
Rated washing capacity (kg)
How to settle
Use it when the power is on.
Insert the power plug tightly.
Level the machine properly.
Remove the metal foreign
bodies
9
003080
Loading...