Haier XPB60-287S User Manual

Twin-tub Washing Machine
This manual is for XPB60-287S
User manual
Please read this manual carefully before using. Retain it for future reference.
Contents
Parts and features
Important safety instructions
Installation
Preparation before washing
Cautions
Usage of the detergent
Washing sequence
Additional spinning
Rinsing Spinning
Care and cleaning
Trouble-Shooting
Accessories supplied
Specification
14
Parts and features
Water inlet
Water filling switch
Drain hose hook
Lint filter (Installed by user)
Meaning and description of the symbols
Power cord
Contents marked with this symbol are related
Warning
to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage to the machine or injure the personal safety of the user.
Forbidden
Contents marked with this symbol are actions forbidden to perform. Performing of those actions may result in damage to the machine or injure the personal safety of the user.
Please check that the power supply has good earthing connection
condition before using to guarantee your safety.
1
Important safety instructions
Important!
Warning - to reduce the risk of fire, electric shock, or injury when using your appliance, follow basic precautions, including the following: Read all instructions before using the appliance. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This appliance must be properly installed in accordance with the installation instructions before it is used. Never unplug your appliance by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet. Replace worn power cords, loose plugs/power outlets immediately. The power cord must be replaced by an Authorised repairer. Unplug your appliance before cleaning or before making any repairs. Do not operate your appliance in the presence of explosive fumes. Do not use hot water that exceeds 65 C. Do not use this appliance to wash clothes soaked, spotted or washed in petrol, dry cleaning solvents, or any other explosive or flammable substances that could ignite and explode. Clothes or rags used to clean flammable or explosive materials should not be washed in this appliance until all traces of this material has been removed. Do not add or mix any flammable or explosive substances to the wash. Do not try to remove clothes while the tub is moving. Let it come to a complete stop. The lid must be closed when the bowl is spinning. Do not operate your appliance when parts are missing or parts are broken. Do not use this appliance for commercial clothes washing. Do not operate this appliance unless all enclosure panels are properly in place. Do not tamper with the controls. To reduce risk of injury do not allow children to play with the appliance. Close supervision of children is necessary when the appliance is used near children. This appliance must be connected to a proper electrical outlet socket with the correct electrical supply. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-repair instructions that you understand and have skills to carry out. To reduce the risk of electric shock or fire, do not use extension cords or adapters to connect the unit to an electrical power source.
SAVE THESE INSTRUCTIONS
2
Installation
Please install and adjust the machine in accordance with this manual. It is very important for your safety and for the correct operating of your machine.
Install the lint filter
After opening the package , please take out the lint filter from the bag , install it to the overflow filter of the wash tub. See the figure.
Overflow filter
Lint filter
Connecting the hoses & Selecting the water level
Use the new hose-sets supplied with the appliance. Do not use old hose sets from your previous appliances.
Connect the water inlet hose into the water inlet on the control panel.
Select water level suitable to the quantity of the laundry. Set the water level indicator to a suitable level. The temperature of water must be under 60 C.
Maximum
Medium
Minimum
Water inlet hose
Water level indicator
Max
Med
Min
Water inlet
Set up the drain hose
Before using, hang the drain hose in a suitable location.
The height of the drain hose should be between
0.8-1.2m .
3
0.8 H 1.2m
Loading...
+ 11 hidden pages