Haier TDC1314S User Manual

USER MANUAL

Please read this manual carefully before using this TV set and keep it for future reference.

13 TV/DVD

Combo

TDC1314S

CONTENTS

Before Operation

Warning and cautions...........................................................................

Installation..............................................................................................3

Antenna Connection

..............................................................................

Preparation of the remote control..........................................................3

Function buttons and ........................................

Front panel of the TV set.....................................................................4

Rear panel of the TV set.......................................................................4

Using the remote control......................................................................5

Basic operation

Menu DVD Operation

Basic Playback.....................................................................................18

Advanced Playback..............................................................................19

Special Function Playback...................................................................20

DVD System Setup................................................................................22

Playable Discs.......................................................................................26

Disc Protection and DVD Characteristics..........................................27

Others

Connection to the external audio and video equipment..................28

Troubleshooting guide

Specifications .....................................................................................30

Warranty

Functions

............................................................................................... 30

External Connections

......................................................................................

........................................................................29

2 4 4 4 5 5 5 6

19 20 21 23 27 28

29 30 31 32

Important safety Instructions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

DANGEROUS VOLTAGE

Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock, is present within the cabinet of this unit.

ATTENTION

The Owner's Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

Cleaning the tube

Should the picture tube require cleaning, disconnect the power and use a dry soft cotton cloth. Do not use any cleaner or abrasive cloths.

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, and to ensure reliable operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installations such as a bookcase or rack unless proper ventilation is provided or the manufacturer=s instructions have been adhered to.

Important safety Instructions

10. POWER SOURCES

This unit should be operated only from the type of power source indicated on the rating plate. If you are

not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs,convenience receptacles, and the point where they exit from the appliance.

12. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

13. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

14. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

15. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

16. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17. DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to

restore the unit to its normal operation. e. If the unit has been dropped or the cabinet has been damaged. f . When the unit exhibits a distinct change in performance, this indicates a need for service.

18. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

19. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

20. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves,

or other products (including amplifiers) that produce heat.

21. DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

22. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

23. SOUND VOLUME

Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high

volume sound may cause hearing or speaker damage.

Installation

Antenna connection

Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different.

Mixer

additional

purchase

Antenna input

75 standard

coaxial type

AC power socket Note: * It is recommended that a 75 ohm coaxial antenna is used to avoid interference. *To avoid interference from electrical signals, do not bind the antenna cable together with any mains lead.

Preparation for the remote control

Battery installation

Remove the battery cover.

Insert two size AA batteries matching the +/-polarities of the battery to the +/marks inside the battery compartment.

Tips for remote operation

! When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.

! Do not throw the batteries into fire. Dispose of used batteries in the specified manner.

! Do not drop, dampen or disassemble the remote control.

2x "AA"

Function Buttons and External Connections

Front panel the TV set

Power Indicator

Signal Receiver

Video

R/L Audio

Rear panel of the TV set

Video Y input terminal

Audio left channel output terminal

Video output terminal

Video 2

TV/DVD

Power

Volume up/ down

Power Switch

Open/close

Play

Channel Position up/down

DVD input terminal Video Cr input terminal

Antenna input socket

Audio right channel output terminal

Audio right channel input terminal

Audio left channel input terminal

Play the DVD

Open/close the DVD

Stop

Stop the DVD

Using the Remote Control

Buttons on the remote control

Standby Power

POWER

DISPLAY

VOL-VOL-

ZOOMZOOM

PAUSE/STEPPAUSE/STEP

STOPSTOP

A-BA-B

ANGLEANGLE

D.CALL

DVD/TV

EXIT

REVREV

NEXTNEXTPREVPREV

10+

REPEATREPEAT

AUDIOAUDIO

SETUPSETUP

MUTE

TIME TIME

CH+CH+

CH-CH-

FWDFWD

PLAY/ENTERPLAY/ENTER

SLOWSLOW

SLSL

SEARCHSEARCH

OPEN/CLOSE

CCD CCD

RECALL

TV/AVP.STD

VOL+VOL+

SCAN

SLEEP SLEEP

D.MENUD.MENU

SUBTITLESUBTITLE

PROGRAMPROGRAMTITLE/PBCTITLE/PBC

D.SCAN

DVD Open/close

TV/DVD

Mute

Program Number

CCD ( closed caption)

Digital Selector

Display

Channel Recall

Exit Screen Display

Time Menu

Picture Mode

TV/AV Exchange

Volume Selection

Channel Selection

ZOOM

Scan

DVD FAST REVERSE / FAST FORWARD

DVD next Chapter

DVD Cursor Move button

DVD previous Chapter

SLEEP

DVD PAUSE/STEP

DVD PLAY/ENTER

DVD STOP

DVD MENU

1O+ BUTTON

DVD SUBTITLE

DVD A-B REPEAT

DVD Slow Motion

DVD REPEAT

DVD PROGRAM

DVD ANGLE

DVD TITLE

DVD AUDIO

DVD SCAN

DVD CALL

DVD SETUP

DVD SEARCH

LEFT

RIGHT

DOWN

Remote Features Power Button: To turn power ON or OFF , press power button on remote control.

POWER

System and Channel Display Button: This will show you the current playing channel number. System will also be displayed if set.

DVD/TV Button: Press this button to set the TV status between TV and DVD.

Sleep Timer Button This feature allows you to turn off television in pre-selected

minutes (180.170,160, ........,10 and 0). To cancel, keep

pressing button until you exit out.

TV/AV input Button: This button has five setting A)Video1, B)Video 2,C)DVD,D)TV . Pressing this button will take you to the appropriate setting.

Mute Button: Press mute button to turn off the TV volume.

Direct Access Channel Select & digital selector:

Follow the procedure select the channel.

One Digit Channel Select:

When you want to select one digit channel ,press 0 and other

digit.

Two Digit Channel Select:

When you want to select two-degit channel. Press the digit

select twice , then press the two digits .

Three Digit Channel Select:

When you want to select three digit channel .Press the digit

select twice , then press the three digits .

Audio Button:(4)

CCD Button:

You can stereo, Mono or SAP (Second Audio Programming)

Press CCD button to set the C.Caption ON or OFF.

choice by pressing audio button .Whenever you change the

channel ,you will see the text message on the button left corner

OPEN/CLOSE Button:

such as ¡°Stereo Received¡±Stereo SAP Received ¡±or ¡°Mono

Press this button to open or close the DVD disc tray .

Received ¡±. This message depends on the broadcast format of

the TV program.

DISPLAY

DVD/TV

SLEEP

TV/AV

MUTE

CCD

OPEN/CLOSE

Channel (+/-) Select Button: You can go up and down the channels by pressing CH (+) button and CH (-) button.

This button can also be used in selecting the function in

the Menu Mode.

VOL-VOL-

CH+CH+

VOL+VOL+

Menu Select Button: You can select the menu by pressing the MENU button. You can call on the menu (PICTURE, TIME, TUNE andFUNCTION) by pressing the corresponding button on the remote control.

CH-CH-

Volume (+/-) Select Button: You can increase the volume by pressing VOL (+) button and decrease VOL(-) button.This button can also be used in adjusting the function

selected to your requirements in the Menu Mode.

Last Channel Recall Button: This feature automatically puts the last channel into the memory

RECALL

so when you press the recall button that channel comes right back to the previous channel.

Picture Preference Select Button: By pressing this exclusive personal preference button, you can select different preset brightness shades for different picture environment.

Program Scan Button:

This feature automatically scan the channel available. By pressing again it stops scanning the channels.

System and Channel Display Cancel Button: This will cancel you the current playing channel number. System will also be cancelled if set.

Time menu button: When pressed it displays Time Menu Screen.

10+ button: Press this button first when select a channel among 10-19,then press number button to make the accurate selection.

P.STD

SCAN

EXIT

TIME

10+

Menu Features

Picture Set up:

Pressing MENU button once will bring Picture Set Up display on TV. You will see the following on your TV screen.

Video

Picture 70

Brightness 32 Color 50 Sharpness 40 TINT

Color Temp. Neutral

Follow the procedure below to adjust the picture quality of your choice:

1.Press CH(+) button to go up and pressCH(-) button to go down the menu.

2.Press VOL(+) button to increase and VOL(-) button to decrease the level to your preference for each item.

Adjustment of Picture Quality: To adjust the picture quality from the factory preset read the following: Picture:00 being the lowest and 100 being the highest level of adjustment. Brightness:00 being the lowest and 100 being the highest level of adjustment. Sharpness: 00 being the lowest and 100 being the highest level of adjustment. Color Temp: This f has three setting A) , B)warm,C)cool.

eature Neutrall

Picture: By increasing the level. It will adjust white areas of picture and by decreasing the level , it will adjust black areas of picture. Brightness: By increasing the level, it will add more light to dark parts of the picture and by decreasing the level, it will add more dark to light parts of the picture. Sharpness: By increasing the level, it will show cleaner and clearer images and by decreasing the level, it will make picture smoother. Color Temp : By pressing the VOL(+) button to select the three setting A)Neutrall, B)warm,C)cool.

Tint:You can adjust the tint of the picture by going into picture set up menu. By increasing the level, it will give red tint to skin color and by decreasing the color it will give green tint to skin color.

Audio Set Up:

By pressing MENU button ,and then pressing VOL(-/+) button will bring you to Audio Set Up display. You will see the following on your TV screen.

Audio

Volume 45

Follow the procedure below to adjust the sound quality:

1. Press CH(+) button to go up and press CH(-) button to go down the menu.

2. Press VOL (+) button to increase and VOL (-)button to decrease the level to your preference.

Clock Set Up:

By pressing the MENU button ,and then pressing VOL(-/+) button will bring you to Clock set up menu. You will see the following on your TV screen:

Timer

Clock 17:18

Time-on 18:00 Ch. select 1 Time-off --:-Sleep Time 0 Remind Time --:-Ch. Switch 1

Follow the procedure below to select one of the above options:

1.Press CH(+) button to go up and press CH (-) button to go down the menu.

2.Press VOL (+) button or VOL (-) button to select your preference.

Clock: Press VOL (+) button for MINUTES and VOL(-) button for HOURS adjustment. Time-On: Press VOL(+) button for MINUTES and VOL (-) button for HOURS adjustment. This feature works like an alarm lock. Your TV will turn on at the set time. Ch. select: This exclusive feature switches you to your favorite channel at the appropriate set time. Press VOL(+) button to set up time in MINUTES to switch the channel and VOL(-) button to set up time in HOURS to switch the channel. Time-Off : Press VOL (+) button for MINUTES and VOL (-) button for HOURS adjustment.This feature works like an alarm clock. Your TV will turn off at the set time. Sleep time: This feature allows you to turn off television in pre-selected minutes (180,

170,160, ........,10 and 0). To cancel, keep pressing button until you exit out.

Remind time: Press VOL(+) button to set MINUTES of attention and VOL (-)button to set HOUR of attention. You will see the flashing time on your TV when the attention time is up. Note: This exclusive feature will remind you of important chores while watching TV.(e.g. Time to take pills, time to check cooking, time to call , time to do homework ,etc.) Ch. Switch: This feature lets you store the favorite channel. Once you store the channel number in this function, when the set time is up, it will switch over to the set channel. This feature is used with the Exchange feature. Press VOL(+) button to go up and VOL(-) button to go down to select the channel.

+ 23 hidden pages