Haier PFL510W-u Service Manual

MODEL: PFL510W-U

Order No.

PFL510W-U

2010

PFL510W-U

PFL510W-U

PFL510W-U

(You will see them in the program introduction table)

Signify the program has this course.

FFL510W-U

Extra rinse function:Increase the times of rinse by choosing the function button(at most three times)
Quick wash function:For washing slightly dirty clothes to save water power and time

Intense wash function:For washing relatively dirty clothes to ensure the washing efficiency
Foam self-detect :Automatically add rinse times until the laundry is cleaned when detecting too much foam
Eccentric protection :When spinning,if the clothes are not evenly distributed,the washer will fluff out and

redistribute the clothes and continue spinning after the clothes distribution becomes
even.If the clothes distribution does not become even within the specified time,the washer
will not spin to avoid abnormal vibration.In this case,please check the clothes for intertwist

clothes, the washer may not spin due to eccentric protection.In this case,you can put more
clothes into the washer and make them evenly distributed,then continue spinning.In
addition, it is normal that the program time will prolong because the washer rearranges
and fluffs out the clothes.

Power-down memory :The washer can memorize the program running state in case of power failture or loose

plug during washing and continue the formerly selected program after the power
supply resumes.

PFL510W-U

PFL510W-U

3

54.1

73.8

7

PFL510W-U

8

PFL510W-U

SERVICE MANUL

Haier Washing Machine

9

PFL510W-U

Program knob

By turning the knob clockwise/counterclockwise, the required program can be
selected. There are 11 programs available. After a program is selected, the
corresponding light will go on.

Power Switch

Press this button to switch on the washing machine. Press it again to switch it off.
Press this button gently for 2 seconds to switch off the machine as buttons are soft
touch sensitive.

Start/Pause Button

When the washing machine is connected to the power socket and a program is
selected, lightly touch this button to start operation. During a wash cycle, touch it
lightly ,operation will stop and the digits on the screen start blinking. Touch it again
to resume operation.

Spinning Speed Setting Button

Touch this button lightly to select the desired speed. When a speed is set, the
corresponding indicator light will be illuminated.

Note: Different water temperatures and spinning speeds can be set for
different laundries. Wash using the default settings if there is no special
requirement.

Washing temperature button

Touch this button lightly to select the desired washing temperature.When a washing
temperature is set, the corresponding indicator light will be illuminated.
Select a temperature according to the type of laundry.