Haier PDVD770 User Manual
VIDEO
USER MANUAL
PDVD770
PORTABLE DVD PLAYER
WITH 7" TFT LCD SCREEN
IMPORTANT
READ THESE INSTRUCTIONS
BEFORE USE AND RETAIN
FOR FUTURE REFERENCE.
HDCD
VIDEO
CAUTION:
DVD/VIDEO CD/CD PLAYER IS ACLASS 1 LASER
PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD
PLAYER USES A VISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE
DVD/VIDEO CD/CD PLAYER CORRECTLY AS INSTRUCTED.
WHEN THIS DVD/VIDEO CD/CD PLAYER IS
PLUGGED TO THE WALL OUTLET, DO NOT
PLACE YOUR EYES CLOSE TO THE OPENING OF
THE DISC TRAY AND OTHER OPENINGS TO
LOOK INTO THE INSIDE OF THIS PLAYER.
USE OF CONTROLSORADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATIONEXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
WARNING:
- TO PREVENT FIRE OR SHOCK HAZARD.DO
NOT USE THIS PLUG WITH AN EXTENSION
CORD.RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLYINSERTED
TO PREVENT BLADE EXPOSURE.
- TO PREVENT FIRE OR SHOCK HAZARD. DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
THIS DEVICE IS INTENDED FOR CONTINUOUS
OPERATION!
SAFETY INFORMATION
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER -SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash witharrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of
uninsulated "dangerous voltage" within the
product's en-closure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point withinan equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
VENTILATION WARNING:
THE NORMAL VENTILATION OF THE PRODUCT
SHALL NOT BE IMPEDED FOR INTENDED USE.
CAUTION - LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacture's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.
9) Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10)Protect the power cord from being walked on or
pinch particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the
manufacturer.
12)Unplug this apparatus during lightening storms or
when unused for long periods of time.
13)Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus, has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
14)This appliance shall not be exposed to dripping or
splashing water and that no object filled with liquid
such as vases shall be placed on the apparatus.
1
2
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the condition that this device does not
cause harmful interference.
REGION CODE SETTING
Region coding: All DVD discs are coded by the sales territory.
Please note the player is set to region 1 coding by the factory
which cannot be changed. This is in compliance with the DVD
patent requirements.
1
The region number for this DVD player is
TABLE OF CONTENTS
Getting Started:
SAFETY INFORMATION...........................................1-2
TABLE OF CONTENTS................................................2
OVERVIEW OF THE DVD PLAYER..............................5
GET A QUICK GLANCE AT THE REMOTE
CONTROLLER...........................................................5
YOUR DVD PLAYER TO OTHER
EQUIPMENT...............................................................6
BASIC PLAYBACK.......................................................6
COMMON PROCEDURES FOR INITIAL SETTINGS...8
...........................................................8
.....................................................8
..............................................................8
...............................................................9
.........................................................9
DISC HANDLING PRECAUTIONS...............................9
TROUBLESHOOTING...................................................9
WARRANTY.................................................................10
FEATURES....................................................................3
PRECAUTIONS.............................................................3
INSTALLING BATTERY................................................4
CONNECTING
CONNECTING TO A CAR ADAPTOR..........................6
SYSTEM SETUP
LANGUAGE SETUP
AUDIO SETUP
VIDEO SETUP
SPEAKER SETUP
S-VIDEO OUTPUT CONNECTORS
RAPID ADVANCE/REVERSE
PAUSE OR STEP PLAY
STOP PLAYBACK
SLOW-MOTION PLAY (DVD/VCD)
SEARCH FOR PREFERRED SCENE
PROGRAM PLAY(UP TO 16 MEMORIES)
ON SCREEN DISPLAY INFORMATION
CHANGING AUDIO SOUNDTRACK LANGUAGE(DVD/VCD
DISC)
MULTI-ANGLE VIEWING (DVD ONLY)
CHANGING SUBTITLE LANGUAGE (DVD ONLY)
MP3 PLAYBACK
KODAK PICTURE CD / JPEG CD PLAYBACK
KODAK PICTURE CD / JPEG CD OPERATIONS
COLOR AND BRIGHTNESS ADJUSTMENT(FOR THE LCD
SCREEN)
COAXIAL DIGITAL AUDIO OUTPUT
PREPARATION
GETTING STARTED
ADJUST THE VOLUME
SKIP AHEAD OR BACK
REPEAT
ZOOM PLAY
Operations:
Initial Settings:
For Reference:
REGION CODE SETTING.............................................2
UNDERSTANDING THE CONTROL BUTTONS.......6-8
ENJOYING VIDEO CDS WITH PBC FEATURE
FEATURES
HIGH QUALITY SOUND AND PICTURE
96 kHz/24 bit audio D/A converter
12 bit video D/A converter
7" TFT DISPLAY
ENCLOSED LITHIUM BATTERY PACK
MULTI TV SYSTEM SUPPORT
GRAPHICAL USER INTERFACE SCREEN
MULTI-AUDIO FUNCTION
MULTI-SUBTITLES FUNCTION
MULTI-ANGLE FUNCTION
PARENTAL LOCK FUNCTION
DISC FORMATS SUPPORTED BY PLAYER
This player enables 96 kHz/24 bit linear PCM signals, which
constitute the highest specifications in the DVD standards,
to be reproduced faithfully. To support 96 kHz sampling/24
bit sound, the shaping noise of this multi-level digital sigma
type of D/A converter is kept flat up to 44 kHz, thus
preventing the important audio signals from being affected
in any way. In terms of the bottom line, the sound in all of its
various modes is reproduced faithfully.
With its 12 bit capability, this D/A converter reproduces
images faithfully.
This player build in 7" TFT display window, provide you clear
vision, and low radiation.
This 7.4V rechargeable lithium battery pack can last about 2.5
hours, provide you playing disc everywhere.
The player can play back discs with signal system of PAL and
NTSC.
Simply by pressing the DISPLAY button on the remote control
unit, information on the player and disc can be displayed on
the TV screen for easy identification, The player's operations
and settings can easily be performed by operating the remote
control while monitoring the TV screen.
The audio soundtrack can be heard in up to 8 languages.
(The number of audio sound languages depends on the
software.)
Subtitles may be displayed in one of a maximum of 32
languages depends on the software.
This function allows you to choose the viewing angle of
scenes which were shot from a number of different angles.
(Limited to DVD recorded with multiple camera angles.)
This can prevent play of DVD unsuitable for children.
The player can play back discs bearing any of the following
marks:
3
PRECAUTIONS
Please read these precautions before operating this player.
To avoid any malfunctions of the player, and to protect against
electric shock, fire or personal injury, please observe the
following.
Avoid placing the player in areas of:
Direct sunlight or heating radiators, or closed automobiles
High temperature (over 35 C) or high humidity (over 90%)
Excessive dust
Vibration, impact or where the surface is tilted as the
internal parts may be seriously damaged.
When the player is not being used, set the player to the
standby mode.
When left unused for a long period of time, the player should
be unplugged from the household AC outlet.
Touching internal parts of this player is dangerous, and
may cause serious damage to the player. Do not attempt to
disassemble the player.
Do not put any foreign object on the disc tray.
Keep the player away from flower vases, tubs, sinks, etc. If
liquids are spilled into the player, serious damage could
occur.
Keep magnetic objects such as speakers, at a distance
from the player.
Place the player in a horizontal position, and do not place
anything heavy on it.
Do not place the player on amplifiers or other equipment
which may become hot.
Moisture may form on the lens in the following conditions:
Immediately after a heater has been turned on.
In a steamy or very humid room.
When the player is moved from a cold environment to a
warm one.
If moisture forms inside this player, it may not operate properly.
In this case, turn off the power and wait about one hour for the
moisture to evaporate.
Depending on the reception condition of the TV, interference
may appear on the TV screen while you are watching a TV
broadcast and the player is left on. This is not a malfunction of
the player or the TV. To watch a TV broadcast, set the player
to the standby mode.
Power Cord Protection
Hold the plug firmly when connecting or disconnecting
the AC power cord.
Do not connect or disconnect the AC power cord when
your hands are wet.
Keep the AC power cord away from heating appliances.
Never put any heavy object on the AC power cord.
Do not attempt to repair or reconstruct the AC power
cord in any way.
Remove dust, dirt, etc. on the plug at regular intervals.
If the player has been dropped or otherwise damaged,
set the player to the standby mode and disconnect the
AC power cord.
If the player has fumes, odours or noise, set the player
to the standby mode and disconnect the AC power
cord.
Placement
Non-use periods
No fingers or other objects inside
Keep away from water and magnetic object
Stacking
Condensation
If there is noise interference on the TV while a broadcast
is being received
°
Loading...