Haier P42S6A-C2 User Manual

Download

Page 1

PLASMA TV

OWNER`S MANUAL

MODEL : P42SV6-C1

P42S6A-C2

Please READ this manual carefully before operating the unit, and keep it for future reference.

-Y-

Page 2

CONTENT

BEFORE OPERATING

Warning.................................................................................................................1

Important Safety Instructions

Buttons and interface location

Remote controller

.................................................................................................6

Remote controller key function

................................................................................2

............................................................................. 4

.............................................................................7

Effective range of remote controller......................................................................8

External equipment connections..........................................................................9

BASIC OPERATING

Switching on/off the TV set................................................................................ 12

Watching TV program........................................................................................13

Searching channel............................................................................................ 15

Picture control functions

Sound ....................................................................................19

control functions

.................................................................................. .18

Time functions....................................................................................................21

Multiple aspect ratio and language....................................................................23

ultiple OSD position........................................................................................24

Calendar search and time skip........................

..................................................25

OTHERS

Others functions.................................................................................................26

PC setting..........................................................................................................27

Specifications and functions

Troubleshooting

.................................................................................................30

..............................................................................29

Accessories

Color.SYS

Sound.SYS

Edit Scan Shuttle Time.Skip

Swap

PIP

Zoom/Move Sleep

Left/Prew Forward USB

Right/Next REV EXIT

DOWN

Pause Enter ZOOM HELP

Remote controller

User's manual

Alkaline battery(AA) 2

Power cable

Page 3

Warning

WARNING

RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as

there is no any accessory inside the casing.

*If necessary, please contact authorized after-sales services.

*A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided,

could result in serious injury by high voltage.

*An exclamation mark in a triangle: Major part or accessory of which technical specifications

must be followed if it is to be replaced.

Warning:

To avoid fire or electric hazards, never place your television receiver in an area with heavy moisture. Attention should be paid to avoid accidental scratches or impacts onto the PDP screen.

Caution:

Please read this manual carefully before using your television and keep this

manual in a good place for future reference.

To achieve the best performance of your television, read this User's Manual

carefully and properly store it for future reference.

Information of screen displays and figures in the User's Manual may vary due

to technical innovations.

Caution:

Unauthorized disassembly of this product is prohibited.

Page 4

Important Safety Instructions

The product should be tightly fixed to avoid drop damages and even fire.

Do not locate the product close to water or oil, which may cause fire hazards.

Do not use damaged or worn electric plugs and keep electric cord away from heat sources to avoid electric shocks or fire hazards.

To avoid fire hazards, do not use this product under direct sunlight or closely to heat sources.

Unplug the power supply and antenna of the product when there is a rainstorm, especially Thunderstorm.

Do not connect excessive sockets in parallel or share the same socket by multiple plugs to avoid fire hazards.

The product must be placed on a solid and stable surface to avoid collapse.

Keep the product away from a transformer or heat source to avoid fire hazards.

Unauthorized disassembly of the television is prohibited to avoid electric shocks or fire hazards. Contact authorized after-sales service if technical service is needed.

Disconnect the product from power supply and contact authorized after-sales service if abnormal sound is heard in the product.

Page 5

Important Safety Instructions

Don't use or store inflammable materials near the product to avoid explosion or fire hazards.

The antenna of the product should be away from electric cable to avoid electric shocks.

Always make sure that the televisionis well plugged as poor electric connection might cause fire.

Don't place the product in a humid area to avoid fire hazards.

Never touch the plug when your hand is wet as this might cause electric shocks.

When antenna is used, measures should be taken to prevent water from flowing down along the cable into the television.

Unplug the television, use soft fabric, never chemicals, if you are going to make cleaning of the product. Make sure that no water drops in the product.

Disconnect the television from power supply and antenna when there is a rainstorm or thunderstorm to avoid electric shocks or fire hazards.

The plug and electric cable must be kept clean to avoid electric shocks or fire hazards.

Disconnect the television from power supply to avoid electric shocks or fire hazards in a long vocation.

Page 6

Buttons and interface location

- This is a simplified representation of front panel.

- Here shown may be somewhat different from your TV.

Front panel Control

SOURCE

P42SV6-C1

- VOL +

ENTER

SOURCE

P42S6A-C2

- VOL +

Buttons and functions

Input signal option:

selection of input signals of TV, VIDEO, S-Video, YUV, PC and DVI sources.

2 Menu button

Volume decrease:

for lowering the volume or adjusting the menu.

Volume increase:

for enhancing the volume or adjusting the menu.

Channel number increase and decrease.

Underside

ENTER

Option confirmation.

Power button

for turning on or off the power supply.

Page 7

Buttons and interface location

Rear panel Control

PC VIDEO Input

Connect the monitor output connector from a PC to the jack

DVI RS-232

DVI Input

Connect the monitor output connector from a PC to the appropriate input port.

RS-232 INPUT

(CONTROL/SERVICE) PORT

Connect to the RS232 port on a PC.

Antenna Input

Connect cable or antenna signals to the TV, either directly or through your cable box.

DVD/DTV Input (Component )

Connect a component video/audiodevice to these jacks.

COMPONENT

L-AUDIO-R

Pb/Cb

VIDEOIN

L-AUDIOIN-R

Audio/Video Input

Connect audio/video output from an external device to these jacks.

Audio input

for linking DVI, PC or other appliance audio output terminals.

Video output terminal

Connect ordinary video/audio or other appliance audio input terminals.

Pr/Cr

ANTIN

VIDEOOUT

S-VIDEO

S-Video Input

Connect S-Video out from an S-VIDEO device to the S-VIDEO input.

Power Cord Socket and switch

This TV operates on AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power

LRL

AUDIOOUT

SPEAKER

EXT SUBWOOFER

AC-IN

EXT Subwoofer:

Subwoofer audio output terminal.

External Speaker (8 ohm Output)

Connect to optional external speaker(s).

Page 8

Remote controller

Battery loading

1.Slide open the cover of the battery compartment on the back of the remote controller.

2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark)

3.Replace the cover of the battery compartment.

Precautions

As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.

Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.

Make sure that two 5# 1.5V alkaline batteries are loaded. The batteries must be of the same type. The batteries must be located properly. The batteries are not rechargeable.

Make sure that there is no obstacle between the remote controller and television set.

Page 9

Remote controller key function

Picture still

MUTE

Switches the sound on or off.

S-Video mode

select S-Video.

TV/VIDEO

Selects: TV, Video

NUMBER buttons

CHANNEL select

are not available

OK button

VOLUME UP/DOWN

Increases/decreases

the sound level.

Picture mode option

Standard, Soft,

Bright, Personal

Zoom

Auto adjustment

(PC status only)

Color system option

Program edit

PIP system buttons

are not available

Scan

for search the favorite program

USB system buttons

are not available

Color.SYS

Edit Scan Shuttle Time.Skip

Swap

PIP

DOWN

Pause Enter ZOOM HELP

Zoom/Move Sleep

Left/Prew Forward USB

Right/Next REV EXIT

Sound.SYS

Calendar

Display of year/month/date

POWER

Turns your TV on or off.

PC/DVI mode

select PC/DVI mode.

DVD mode

select DVD mode

Q.VIEW

Tunes to the last channel viewed.

Information display

Display of current channel signals, program and systems

CHANNEL UP/DOWN

Selects available channels found with Auto program.

Brings up the main menu to the screen.

Sound system option

Theater

, Personal,

standard, news

Sound system option

OSD Position button

Time skip button

Nicam select button

Sleep buttons

is not available

Shuttle button

Page 10

Effective range of remote controller

left

P42SV6-C1

front 8m

Color.SYS

Sound.SYS

Edit Scan Shuttle Time.Skip

Swap

PIP

Zoom/Move Sleep

Left/Prew Forward USB

Right/Next REV EXIT

DOWN

Pause Enter ZOOM HELP

right

P42S6A-C2

left

front 8m

Color.SYS

Sound.SYS

Edit Scan Shuttle Time.Skip

Swap

PIP

Zoom/Move Sleep

Left/Prew Forward USB

Right/Next REV EXIT

DOWN

Pause Enter ZOOM HELP

right

above

20 20

below

Ensure the remote controller is pointed toward the remote controller windows on

the display.

No obstacles should be placed between the remote controller and the remote

controller window.

The effective receiving scope for the signal is 8 meters to the front of the remote controller windows, and 45 to the left or right side and 20 above or below the control windows.

Use of remote controller:

1. To ensure a normal operation, the remote controller should not be dropped or

damaged in any way . It should also be kept dry and away from all heat sources.

2. Battery replacement is necessary when the remote controller acts inconsistently

or stops operating the plasma display.

Page 11

External Equipment Connections

- Antenna or Cable Service without a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed.

outdoor antenna

Antenna input

75 standard

coaxial type

EXT SUBWOOFER

AC-IN

AC power socket

300 twin-lead cable

Antenna adapter

75 coaxial cable

Plug (additional purchase)

Note

* It is recommended that you'd better use 75

disturbance caused by airwave.

* Don't bind antenna cable and electric wire together.

To improve picture quality in a poor signal area, purchase

and install a signal amplifier.

If the antenna needs to be split for two Tv`s, install a 2-

WaySignal Splitter in the connections.

If the antenna is not installed properly, contact your dealer

for assistance.

coaxial cable to remove the

Page 12

External Equipment Connections

DVD setup

How to connect

1. Connect the DVD video outputs (Y, Pb/Cb,

Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

2. If your DVD only has an S-Video output

jack, connect this to the S-VIDEO input on the TV and Connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the S-Video button on the remote

control to select S-VIDEO mode.

3. Press Play button on external equipment

for program play.

4. Refer to the DVD player's manual for

operating instructions.

L-AUDIO-R

COMPONENT

Pr/Cr

Pb/Cb

VIDEOIN

L-AUDIOIN-R

DVD

ANTIN

VIDEOOUT

S-VIDEO

AUDIOOUT

LRL

SPEAKER

DTV setup

-To watch digitally broadcast programs, purchase and connect a digital set-top box.

How to connect

Use the TV`s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks, RGB or DVI port for video connections, depending on your settop box connections available. Then, make the corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to

the owner`s manual for the digital set-top box.)

2. Use YUV on the remote control to select

YUV (Y, Pb/Cb, Pr/Cr) mode.

3. Press Play button on external

equipment for program play.

Page 13

External Equipment Connections

PC setup

How to connect

1. Use the TV`s RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC connector.

If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only

one of either RGB INPUT or DVI INPUT to display the Picture on the TV.

If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either

RGB or DVI; (the other mode is set to Plug and Play automatically by the TV.)

2. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required.

How to use

1. Turn on the PC and the TV.

2. Turn on the display by pressing the POWER button on the TV's remote control.

3. Use PC/DVI on the remote control to select PC or DVI source.

4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

NOTES:

1 Use a DVI cable or D-SUB cable. 2 Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen. 3 The synchronization input form for Horizontal and Vertical frequencies is separate.

DVI RS-232

L-AUDIO-R

COMPONENT

VIDEOIN

Pr/Cr

Pb/Cb

L-AUDIOIN-R

ANTIN

VIDEOOUT

S-VIDEO

LRL

AUDIOOUT

SPEAKER

EXT SUBWOOFER

AC-IN

Page 14

Switching ON/OFF the TV set

In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation.

Power ON/OFF

Switching ON/OFF the TV set

1 Please press down the power switch to switch

on AC power supply and the power indicator will light .

2 If the indicator is lighting in red, press button

Remote receiving window

Indicator

SOURCE

display on the front

- VOL +

CH ENTER

on the remote control again.

3 If you want to exchange to standing by status,

please press down button on the remote controller.

4 If you want to fully switch off the power

supply for the TV set, please press down the power switch button on the TV set.

Auto switch-off function

If an empty channel is selected or the TV programs are ended for the day, the power will be switched off 5 minutes later automatically. If the "OFF TIME" is setting, it will be switched off according to the presetting time.

If the "Off timer" is less than 5 minutes, it will

(Note:

be switched off automatically to the presetting time. )

Page 15

Watching TV Program

You can watch TV program in a presetting channel.

Watching TV program

To select the TV mode

Before watching TV program, you may ensure your tv in TV mode. Press TV/AV button to select tv mode.

How to select the desired program

1 Using "Program number" buttons.

Directly enter the channel number with the numeric keypad

on the remote control.

To select channel numbers from 10 ~ 99 ,press continuously

the numeric buttons.

2 Using the CH+/- buttons.

Press the CH+ button to select a channel number in number

increasing direction.

Press the CH- button to select a channel number in number

decreasing direction.

3 Using Prog. NO. Function.

Press the MENU button and VOL+/- button, till picture menu shown on the right display on the screen.

Press the VOL+ button to select a channel number in number increasing direction.

Press the VOL- button to select a channel number in number decreasing direction.

Prog.No.

Sound System

Color System

Fine Tune

Auto Search

picture sound tuner function signal timer

AUTO

527.27 MHz

<Vol+>Adjust

D/K

How to select the desired sound

Press the VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.

Volume

MENU to Exit Vol+/Vol- to Adjust

Page 16

Watching TV Program continued

Watching TV program

If the colour of some channel is abnormal

Usually colour system should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. Press the menu and VOL+/- button, till the picture menu shown on the right will display on the screen.

Prog.No.

Sound System

Color System

Fine Tune

Auto Search

picture sound tuner function signal timer

AUTO

527.27 MHz

<Vol+>Adjust

D/K

If picture color is abnormal

Press the CH+/- buttons to select "color system", then press the VOL-/+ buttons to select the correct color system. In general, you can set it as "AUTO".

If sound is abnormal

Press the CH+/- buttons to select "sound system", then press the VOL/+ buttons to select the correct sound system.

Prog.No.

Sound System

Color System

Fine Tune

Auto Search

picture sound tuner function signal timer

Prog.No.

Sound System

Color System

Fine Tune

Auto Search

picture sound tuner function signal timer

527.27 MHz

<Vol+>Adjust

527.27 MHz

<Vol+>Adjust

Program review

Swap function enables quick swap to the last watched program.

1 Suppose the channel number you

used just now is 8 and the channel number you are using is 18 (as shown in the figure).

If you want to return to the last

watched program channel 8, you can simply press the Q.View button.

If you want to return to channel 18,

press the button again. Through this function, you can easily change between the channel you are using and the channel you used last time.

AUTO

D/K

Page 17

Searching Channel

This TV set has three methods to set channels, which are respectively full automatic,

manual search fine tune.

In this section, how to use the remote control to set channel is explained. You can also use

buttons on the TV set to set channel.

Full automatic search mode

Automatic search

1 Press the MENU button and

VOL+/- button, till tuner menu

shown on the right display on

the screen.

Note : the tuner menu will be

in normal TV mode.only operated

2 Press the CH+/- buttons to

select "Auto Search" item.

3 Press the VOL+ button to

ensure automatic search function work.

After the s arch has finished, the Program Table will display on the screen. All channels now playing program will be automatically preset in order.

Prog.No.

Sound System

Color System

Fine Tune

Auto search

picture sound tuner function signal timer

Prog.No.

Sound System

Color System

Fine Tune

Auto search

picture sound tuner function signal timer

Program Searching Press <OK> to Cancel

073.25

Programs Found 01

Program Table

00 @0497 01 @0622 02 @0832 03 @1442 04 @1842 05 @2112 06 @2322 07 -- --08 -- --09 -- ---

10 ----11 ----12 ----13 ----14 ----15 ----16 -- --17 ----18 ----19 -----

Vol+/Vol- Ch+/Ch- to Select Program

1=Del 2=Change 3=Rename 4=Favorite 5=Skip

527.27 MHz

<Vol+> Adjust

527.27 MHz

<Vol+> Adjust

20 ----21 ----22 ----23 ----24 ----25 ----26 -- --27 ----28 ----29 -----

AUTO

D/K

Page 18

Manual search

Press the CH+/- buttons or the

PROGRAM NUMBER 0-9 button to choose desired channels regard channel 1 as example

2 Press the MENU button and

VOL+/- button, till the tuner menu shown on the right display on the screen.

3 buttons to

Press the CH+/-

select " Search" item.

4 Press the VOL-/+ buttons to

start searching.

The VOL- down button is used for lower side program search. The VOL+ up button is used for higher side program search. Repeat this step, till find the desired channel.

TV01 AUTO D/K

AUTO

527.27 MHz

<Vol+> Adjust

AUTO

527.27 MHz

<Vol+> Adjust

D/K

Prog.No.

Sound System

Color System

Fine Tune

Auto Search

picture sound tuner function signal timer

Prog.No.

Sound System

Color System

Fine Tune

Auto Search

picture sound tuner function signal timer

Page 19

Fine tune

If the picture or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor.

Press the CH+/- buttons or

NUMBER 0-9 button to choose desired channels

regard channel 8 as example

2 Press the MENU button and

VOL+/- button, till the tuner menu shown on the right display on the screen.

3 buttons to

Press the CH+/-

select "Fine Tune" item.

4 Press the VOL-/+ buttons all

through to carry out fine tune, till the best picture and sound are obtained, then loosen the button.

TV08 AUTO BG

AUTO

527.27 MHz

<Vol+> Adjust

AUTO

527.27 MHz

<Vol+> Adjust

D/K

+05

Prog.No.

Sound System

Color System

Fine Tune

Auto Search

picture sound tuner function signal timer

Prog.No.

Sound System

Color System

Fine Tune

Auto Search

picture sound tuner function signal timer

Page 20

Picture Control Functions

Multiple picture modes

How to select picture modes

You can quickly select the desired picture mode from three preset modes and one customized mode.

Press the PSM button to select the

desired picture quality. Four kinds

of picture modes (i.e.,

"Standard",

"Soft", "Bright","Personal", )

can be selected in turn.

Standard

Soft

Bright

Personal

The 4 modes are

Picture mode

Personal

Standard

Soft

Bright

Picture quality

A spare setting that can be adjusted to personal tastes

Designed for rooms that have good all round lighting

Designed for night time low light viewing

Designed for rooms with high ambient lighting such as daytime sport;

How to customize your own picture status

1 Press the ME U button and

VOL+/- button , till the menu shown on the right display on the screen.

picture

Brightness Contrast Sharpness Chroma Tint Picture Mode

picture sound tuner function signal timer

Personal

50 50

2 Press the CH+/- buttons to

select the item to adjusted, then press the VOL+/- buttons to obtain the desired effect.

Brightness

MENU to Return Vol+/Vol- to Adjust

ITEM

Brightness

Contrast

Sharpness

Chroma

Tint

(only in NTSC mode)

Press VOL-

Dark

Weak

Soft

Shallow

More purple

Press VOL+

Bright

Strong

Sharp

Deep

More green

NOTE these items are adjustable only under the personal setting.

Page 21

Sound Control Functions

Multiple sound modes

How to choose sound mode

Press the SSM button to select the

desired sound quality. Four kinds

of sound modes (i.e.,

Theater ,

Personal , Standard and

Theater

Personal

Standard

News ) can be selected in turn.

News

Sound mode

Personal

Standard

News

Theater

Sound quality

A spare setting that can be adjusted to personal tastes

normal sound with moderate bass and treble setting

Designed to reduce the bass and treble which enhances the voice for news programs

Enables extra bass and treble to enhance the movie experience;

How to customize you own sound quality

1 Press the MENU button and VOL+/- button , till the sound menu shown on the right display on the screen.

2 Press the CH+/- buttons to move select the item to be adjusted, then press the VOL-/+ buttons to obtain the desired effect.

Balance

Equalizer

Sound Mode

picture sound tuner function signal timer

Balance

Equalizer

Sound Mode

picture sound tuner function signal timer

Personal

+04

ITEM

Balance

Press VOL-

Press VOL+

R down L down

NOTE these items are adjustable only under the personal setting.

Page 22

Equalizer and mute

How to use Equalizer

MUTE

1 Press the MENU and VOL+/

VOl- button , till the sound menu

Balance

Equalizer

Sound mode

+04

Personal

shown on the right display on the screen.

picture sound tuner function signal timer

2 Press the CH+/- buttons to

select "Equalizer", then press the VOL+ buttons, the menu shown on the right display on the screen.

EQUALIZER

3 Press the VOL+/- buttons to

select frequency to adjust, then press the CH+/- buttons to adjust the value data.

How to eliminate sound

When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient.

1 Press the MUTE button on

the remote control and "MUTE" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off.

Mute

2 If you want to recover the

sound, press the MUTE button again or directly press the VOL-/+ buttons.

Page 23

Time Functions

Clock setting and timer on/off functions

Clock setting

The clock will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the rear panel, the clock loses power and will need to be reset when the power is reconnected.

Clock

1 Press the button and

VOL+/- button, and the timer menu display on the screen.

2 Press the CH+/- buttons select

"Clock",press the VOL -/+ buttons to select hour position; then press the CH+/- buttons to set the value of hour; press again the VOL +/- buttons to select the minutes position, then press the CH+/- buttons to set the value of minute.

On/off timer

Using on/off timer function, the TV set can automatically turn on to a preset program or shut down in a preset time.

On Time

On Prog.

Off Time

Remind Time

Remind Prog.

picture sound tuner function signal timer

Clock

On Time

On Prog.

Off Time

Remind Time

Remind Prog.

picture sound tuner function signal timer

00:00

DVI

00:00

DVI

1 Press the

MENU and VOL+/-

button to call up the timer menu on the screen.

2 Press the CH+/- buttons to select

"On time", press the VOL-/+buttons to select hour position; then press the CH+/- buttons to set the value of hours; press again the VOL +/buttons to select the minute position, then press the CH+/- buttons to set the value of minute..(take 18:00 as an example)

3 Press the CH+/- buttons to select

"On prog", then press the VOL-/+ or program direct number buttons to select your desired channel (take 8 as an example).

4 Repeat step 1-2 to set Off

time .(take 23:00 as an example)

Clock

On Time

On Prog.

Off Time

Remind Time

Remind Prog.

picture sound tuner function signal timer

Clock

On Time

On Prog.

Off Time

Remind Time

Remind Prog.

picture sound tuner function signal timer

Clock

On Time

On Prog.

Off Time

Remind Time

Remind Prog.

picture sound tuner function signal timer

00:00

18:00

00:00

23:00

00:00

DVI

Page 24

Time Functions

Remind Time and Remind Program setting

How to use the remind time and program

Program remind timer, that displays an on-screen reminder prompt, when a program on a different channel is due to start.

Clock

1 Press the

MENU and VOL+/-

button to call up the timer menu on the screen.

On Time

On Prog.

Off Time

Remind Time

Remind Prog.

picture sound tuner function signal timer

2 Press the CH+/- buttons to

select "Remind Time", then press the VOL -/+ buttons to select hour position; then press CH+/- to set the value of hour. Repeat 2 step to select the minute position and set the value of the minute.(take 19:30 as an example)

3 Press the CH+/- buttons to

move the cursor to "REMIND PROG", then press the VOL -/+ buttons or the program direct number buttons to set the desired channel or source (take DVI as an example).

NOTE the Tv offers multi-remind program. I.e., "PC", "AV","SV", "DVI", "YUV", "00",

"01", "02",......."99") can be selected in turn.

Clock

On Time

On Prog.

Off Time

Remind Time

Remind Prog.

picture sound tuner function signal timer

Clock

On Time

On Prog.

Off Time

Remind Time

Remind Prog.

picture sound tuner function signal timer

00:00

19:30

00:00

DVI

Page 25

Multiple aspect ratio and language

Multiple aspect ratio and language setting

How to choose picture aspect ratio

1 Using ZOOM button.

Press the ZOOM button to select the desired picture ratio. Four kinds of modes (i.e., Fill all

aspect ratio , Normal

, Wide and Zoom )

can be selected in turn.

Aspect ratio

Fill all

Normal

Wide

Zoom

Picture effect

no cut out on input signal ,screen is filled by picture

no cut out on input signal picture with un-changed scale displayed on the screen (to keep the scale, maybe only the center area of the screen is active)

input signal is vertically cut out by 10% and picture's center area is non-linear zoomed to fill the whole screen

input signal is vertically cut out by 15.3% no non-linear zoomed to fill the screen

2 Using button.the MENU

1 Press the MENU button and

VOL+/- button , till the function menu shown on the right display on the screen.

Fill All

Normal

Wide

Zoom

Language

OSD Position

Time Skip

Aspect Ratio

Calendar

picture sound tuner function signal timer

English

Center

00:00

2 Press the CH+/- buttons to

select then press the VOL+ buttons to select the item to desired.

Aspect Ratio item,

Language

OSD Position

Time Skip

Aspect Ratio

Calendar

picture sound tuner function signal timer

English

Center

00:00

Page 26

Multiple OSD position

Multiple OSD position setting

How to choose OSD position

1 Using "OSD posi" button.

Press the to select the desired

OSD posi" button

picture position. Five kinds of position modes (i.e.,

Center , Right T Right B and

, Left T

Left B ) can be selected in turn.

OSD position

Center Left T Right T

OSD position OSD position

OSD position

Left B Right B

OSD position

2 Using button.the MENU

1 Press the MENU button and

VOL+/- button , till the function menu shown on the right display on the screen.

2 Press the CH+/- buttons to

select then press the VOL+ buttons to select the item to desired position.

OSD Position item,

Language

OSD Position

Time Skip

Aspect Ratio

Calendar

picture sound tuner function signal timer

Language

OSD Position

Time Skip

Aspect Ratio

Calendar

picture sound tuner function signal timer

English

Center

00:00

English

Center

00:00

Page 27

Calendar search and time skip

This TV set has been designed to search the calendar from the year 1900 to 2100.

Calendar search and time skip

To choose calendar search

1 Press the MENU button and

VOL+/- button , till the function menu shown on the right display on the screen.

2 Press the CH+/- buttons to

select

"Calendar item, then

press the VOL+ buttons to display the calendar menu on the screen.

3. Press VOL+ button to

search the desired year or month.

4. Press CH+/- button to

adjust the desired year or month.

5. Press the TIME button

to return to previous mode.

Jan

English

Center

00:00

English

Center

00:00

8765432

1514131211109

2229212820271926182517

Language

OSD Position

Time Skip

Aspect Ratio

Calendar

picture sound tuner function signal timer

Language

OSD Position

Time Skip

Aspect Ratio

Calendar

picture sound tuner function signal timer

00:05:52

S M T W T F S

To choose time skip function

Repeat step 1. to select

"Time Skip item, then

press the VOL+/- buttons to set the desired time.

Language

OSD Position

Time Skip

Aspect Ratio

Calendar

picture sound tuner function signal timer

English

Center

05:30

Page 28

Others functions

Program Edit Scan Nicam and display functions

Program edit and Scan

Edit Scan

1 Press the Edit button, the

Program Table display on the screen.

2 Press CH+/- or VOL+/-

button to select program, then press the number button 4 to set favorite program.

Program Table

00 @0497 01 @0622 02 @0832 03 @1442 04 @1842 05 @2112 06 @2322 07 ----08 ----09 -----

10 ----11 ----12 ----13 ----14 ----15 ----16 ----17 ----18 ----19 -----

Vol+/Vol- Ch+/Ch- to Select Program

1=Del 2=Change 3=Rename 4=Favorite 5=Skip

20 ----21 ----22 ----23 ----24 ----25 ----26 ----27 ----28 ----29 -----

DISPLAY

Shuttle

3 Repeat step 2 you may set

Favorite TV04

multiple favorite program.

4 Press SCAN button to enjoy desired program.

NICAM

Press the I/II button will result in fast swap of NICAM function of current program.

Display function

Press the DISPLAY button, then

the channel number and system

will be displayed on the screen.

Press again,

the DISPLAY button

it is disappear.

TV03 AUTO BG

Shuttle function

Shuttle function enables quick swap to setting program.

Press Shuttle button about 3 second,

and the display Shuttle on the screen,

at the time, you may operate other, then

if you scan over program, you may press

again shuttle button to return to the

setting program.

Shuttle

TV03 AUTO BG

AUTO

D/K

Page 29

PC setting

Press PV/DVI button to select PC mode.

1 Press the MENU button

and VOL+/- button , till the signal menu shown on the right display on the screen.

2 Press the CH+/- buttons to

select the item to adjusted, then press the VOL+/buttons to adjust.

ITEM

Red

Green

Buel

Note

Recommendatory frequency as follow:

Sequence frequency

Press VOL-

Weaker

H-frequency

KHz

31.5

37.88

48.36

Red Green Blue H position V position Auto Adjust <Vol+> Adjust

picture sound tuner function signal timer

Press VOL+

Stronger

V-frequency

Remark

DOS

VESA

NOTE As the frequency of display differ in PC device you may select the appropriate frequency to obtain desired effect. If the signal of receive is excess, the picture can not be displayed or wrong on the screen.

Page 30

PC setting continued

In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference.

Multiple picture position setting

PC setting

1 Press the MENU button

and VOL+/- button , till the signal menu shown on the right display on the screen.

2 Press the CH+/- buttons to

select the item to adjusted, then press the VOL-/+ buttons to obtain the desired effect.

Red Green Blue H position V position Auto Adjust <Vol+> Adjust

picture sound tuner function signal timer

Note:

1. A It is natural

s adjusting H position or V position ,

he picture will have faintness once in a while if the range is

that t more, then to adjust contrarily to normal position.

2. H-position,V-position,Auto Adjust are not available in TV mode , AV and S-VIDEO mode.

3. Auto Adjust is only available in PC/DVI mode.

parameter

Page 31

Specifications and functions

Sereen diagonal line 42 inches Picture proportions 4:3/16:9: (4 modes) Panorama picture: 16:9 Picture element: 852 480 Contrast: 10000:1 Brightness: 1500cd/m Multi-input compatibility Advanced technology for motion picture processing Two 7W speakers/optional

Complex component: RCA-pin 3 Component video signal: YUV 1 S terminal: Mini DIN 4-pin 1 RGB input: D-sub 15-pin 1 (480i/p, 720p, 1080i) Audio input: RCA-pin TYPE (L/R) 3: full support separate audio frequency input Audio system: stereo Control port: RS-232 D-sub 9-pin 1

Model

Size (WXHXD) unit:mm main component

Working conditions

Power consumption

P42SV6-C1

1050 664 88

150V-240V, 50/60Hz

380W 380W

P42S6A-C2

1055 654 86

150V-240V, 50/60Hz

Temperature

Working: 0 35 (32 F 90 F) Storage: -15 60 (5 F 140 F)

00 0 0

Humidity

Working: 20 70% Storage: 20 80%

Pressure

Working: 800 1114hpa Storage: 600 1114hPa

Page 32

Troubleshooting

For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance.

Probl em Possible remedies

No pict ure, no sound Turn on the power suppl y;

Properl y plug the TV set to the power socket; Check to see i f t he power cable of other appli ance is plugged i n the TV set. Make sure t hat t he power c able of the TV set is pr operl y connected.

Good picture, no sound Depress t he volume b utton;

Check out t he audio f requency i nput signals. Fail ure of remote contr oller

Check to see i f the remote controller and plasma displ ay recei ving

window are blocked b y other ob ject s and if batt eries are pr operl y

loaded.

No color, weak color or poor pi ctur e

Excessi ve bri ghtness or darkness Picture too b ig or small Adjust the set up of si zes.

One speaker f ail ure Balance the sound in the menu. Slight sound from display It is a normal phenomenon.

Designat e the i tem of col or fr om the Pict ure menu and depres s the

volume button;

Keep the di splay and VCR separ ate a reas onable spac e;

Activate some f unctions to store pi ctur e bri ghtness;

Make sure that t he displ ay and sig nal sour ce are avai labl e and

turned on.

Adjust bri ghtness or contrast.

Note: Do not leave the television with static picture in an extended period as it may

result in residual image on your television screen.

Note: Production of the plasma screen requires high and precision technologies. However,

there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air pressure is below 750hpa, the picture on the plasma screen may be affected and a muffled sound might be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is resulted from difference between air pressures inside and outside the display. This is not a defect covered by the limited warranty.

NOTE

Design and specifications are subject to change without notice. The dimension in this manual is a approximation.

Page 33