Haier P42A9-AK Owner's Manual

Please READ this manual carefully before
operating your TV, and retain it for future
reference.

PLASMA TV

OWNER`S MANUAL

MODEL :P42A9-AK

S

Safety of operators has been taken into consideration at the design and
manufacture phase, but inappropriate operation may cause electric shock
or fire. To prevent the product from being damaged, the following rules
should be observed for the installation, use and maintenance of th product.
Read the following safety instruction before starting the operation.
The User Manual uses the following symbols to ensure a safe operation
and prevent any damage to operators or properties:

Warning

This symbol indicates that high voltage is present inside. It is
dangerous to make any kind of contact with any inside part of
this product.

WARNING : To reduce the risk of electric shock do not remove
cover or back. No user-serviceable parts inside refer service
to qualified service personnel.

This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying the
appliance.

Congratulations on your purchase, and welcome to the family !

Dear Haier product owner:

Thank you for your confidence in Haier. You`ve selected one of the
best-built, best-backed products available today. We`ll do everything
in our power to keep you happy with your purchase for many years to
come.
As a member of the Haier family, you`re entitled to protection by
one of the most comprehensive warranties and outstanding service
networks in the industry.

Thanks for investing in a Haier product.

""

""

RISK OF ELECTRIC SHOCK
DO NOT OPEN

WARNING

1. Retain these Instructions ---The safety and operating instructions should be retained for

Future reference.

2. Heed Warnings ---All warning on the appliance and in the operating instructions should be
followed.

3.Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or
Aerosol cleaners. Use only dry cloth for cleaning.

4. Attachments --- Do not use attachments
not recommended by the manufacturer as they may cause Hazards.

5. Water and moisture -- Do not place this product near water, for example, near a bathtub,
wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

6. Do not place this unit on an unstable cart, stand, tripod, bracket, or table. Use
only with a cart, stand, tripod, bracket, or table recommend by the manufacture, or sold with
the unit.

7. Ventilation ---Slots and openings in the cabinets and the back or bottom are provided for
Ventilation and to ensure reliable operation of the product and to protect it from overheating,
and these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer`s instructions have been adhered to.

8. Power Source ---This unit should be operated only from the type of power source indicated on
the rating label. If you are not sure of the type of power supply to your home, consult your
Appliance dealer or local power company.

9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet. To prevent electric shock, ensure the
Grounding pin on the AC cord power plug is securely connected.

10. Power cord protection ---Power supply cords should be routed so that they are not likely to
Be walked on or pinched by items placed upon or against them. Pay particular attention to
cords or plugs, convenience receptacle, and the point where they exit from the appliance.

11. Lighting precaution ---For added protection for this product during a lighting storm or when
it is left unattended for long period of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product due to lighting and
power line surges.

12. Never push objects of any kind into this product through
openings as they may touch dangerous voltage point or short out parts
that could result in a fire or electric shock. Avoid spilling liquid of any kind
on the product.

13. Servicing ---Do not attempt to service the product by yourself, as opening
or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to authorized service personnel.

14.Damage Requiring Service ---Unplug this unit from the wall outlet and
refer servicing to qualified service personnel under the Following conditions:

Grounding or polarization ---

Accessories---

Important safeguards for you and your new product

Your product has been manufactured and tested with your safety in mind. However, improper
use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have
been built into your new product, please read and observe the following safety points when
installing and using your new product, and save them for future reference.

Important Safety Instructions

S3126A

PORTABLE CART WARNING

(symbol provided by RETAC)

a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have been fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as improper adjustment of
other controls may result in damage and will often require extensive work by a qualified
technician to restore the unit to its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance; this indicates a need for service.

15.Heat --- The product should be situated away heat source such as radiators, heat registers,
stoves, or other products (Including amplifiers) that product heat.

16.Overloading ---Do not overload wall outlets and extension cord as this can result in a risk of
Fire or Electric shock.

17. Outdoor antenna grounding---If an outside antenna or cable system is connected to
the unit, be sure the antenna or cable system is grounded to provide some protection
against voltage surges and built-up static charges, Section 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.

Note: The PDP Manufacturing Process: a few minute colored dots may be

present on the PDP screen
The PDP (Plasma Display Panel), which is the display device of this
product is composed of 0.9 to 2.2 million cells. A few cell defects will normally
occur in the PDP manufacturing process. Several tiny, minute colored dots
visible on the screen should be acceptable. This also occurs in other PDP
manufacturers' products. The tiny dots appearing does not mean that this
PDP is defective. Thus a few cell defects are not sufficient cause for the PDP
to be exchanged or returned. Our production technology minimizes these cell
defects during the manufacture and operation of this product.

ANTENNA LEAD IN WIRE

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)

Important Safety Instructions

Table of Contents

Warning

Important Safety Instructions................

buttons and interface location..............

............................

......................

................................

.....................

Function introduction
Effective range

External Equipment Connections ........

Switching ON/OFF the TV set...........

Choose the Menu Language.............

Select input modes ............................

Tuning menu

.............

Program Table

Manual ..............................

Fine Tuning.....................................

How to select the desired program.......

.......................................

Skip

Program swap.................................

Picture menu

.............

Noise Reduction .............................

.............................................

Accessories .....................................

.......................

...............................

........................

....................................

Front control panel

Rear control panel.......

Remote controller
Keys of remote controller

Operation

Set up your TV...................................

......................................

Auto search........................

.......

search..

Edit Name

...............................................

How to select picture modes

Sound menu..............................................

Setting the surround sound ......................

...........................

Timer menu

On/off time\Timer on Prog\Timer Prog ......

Function menu..........................................

Function setup ......................................

Adjust menu .............................................

To choose picture aspect ration ...............

H-Position and V-Position adjust .............

RGB/Default/Auto Sync ..........................

Color Temperature .................................

Black Stretch .........................................

Picture in Picture

Other functions.........................................

Stream media broadcast system.................

Specifications and functions
Troubleshooting

To choose sound modes ..........................

Setting Five Equalizer sound

Setting the Auto Volume

Setting the woofer sound.........................

How to eliminate sound

...............................................

Timer setting

Lock setup................................................

Teletext functions......................................

Maintenance............................................

......................

.......................................

Balance.................................................

...................

...........................

.........................................

......................................

Accessories

Please READ this manual carefully before
operating your TV, and retain it for future
reference.

PLASMA TV

OWNER`S MANUAL

MODEL :P42LV6-HD

P50V6-A8

S

Ensure that the following accessories are included with your PDP display. If an
accessory is missing , please contact the dealer where you purchased the product.

MUTE

DISPLAY

CH+

STILL

SLEEP

TV/AV

P.STD S.STD

CH-

VOL- VOL+MENU

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

Owner s Manual X 1

Batteries X 2

Remote Control X 1

1
2
4
5
5
6
7
8
8
9
10

16
16
16
17
18
18
19
20
21
22
23
24
24
25
25
25

27
27
27
28
28
29
29
29
30
30
31
32
32
34
34
35
36
36
36
37
40
41
43
45
54
55
56

Front control panel

-This is a simplified representation of front panel.

-Here shown may be somewhat different from your TV.

Buttons and interface location

Buttons and functions

1 Channel number increase and decrease.

2 Volume decrease:

for lowering the volume or adjusting the menu.

Volume increase: for enhancing the volume or adjusting the menu.

3 TV/AV button

4 Menu button

5 Power and indicator: for turning on or off the power supply.

6 Remote receiving window

7 Card jack

- CH + - VOL +

TV/AV MENU

POWER

ANT IN

HDMI/DVI VIDEO

VGA

AUDIO

DVI IN

AUDIO

VGA IN

COMPONENT IN

Pr/Cr Pb/Cb Y L-AUDIO-R

AUDIO OUT

L R

SCART2 SCART1

Buttons and interface location

Rear Control panel

1. AUDIO OUT:

2.VGA IN(PC)
Connect VGA analog cable from the PC to the VGA IN. Connect the audio cable from the PC

to the VGA AUDIO IN.

3.COMPONENT IN
Connect the component cables from the component output of the video device to

COMPONENT IN. Connect the audio cable from the video device to the
COMPONENT AUDIO IN.

4.DVI IN (HDMI-IN)
Connect the HDMI cable from the HDMI output of the digital video device to the HDMI/DVI

VIDEO.(If the PC has DVI only,Connect the audio cable from the digital video device to the
AUDIO .)

5-6.SCART2/SCART1
Used to connect to the DVD/ VCR/ broadcasting receiver or other equipment.

7.Earphone port

8.ANT IN: Connect antenna or CATV 75 coaxial cable to receive TV/CATV signal.

Connect to optional external speaker(s).

VIDEO

L

AUDIO

R

POWER

Power Cord Socket

This TV operates on AC power.

The voltage is indicated on

the specifications page.

Never attempt to operate the

TV on DC power

Switch power on/off

USB Socket

AUDIO Input

connect to hear

stereo sound from an

external device.

VIDEO Input

Connects the video signal

from a video device.

Remote controller

Precautions

3.Replace the cover of the

battery compartment.

Make sure that there is no obstacle between
the remote controller and television set.

As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.

Keep the remote controller away from
heat source or humid area to ensure
effective performance of the remote
controller.

Make sure that two AA alkaline batteries
are loaded. The batteries must be of the
same type. The batteries must be located
properly. The batteries are not
rechargeable.

1.Slide open the

cover of the battery
compartment on the
back of the remote
controller.

2.Load two AA alkaline

batteries in the compartment.

(plus and minus

poles to respective mark)

paying attention to the polarity
diagram in the battery
compartment.

Inserting Batteries

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Keys of remote controller

STILL

Picture static

I/II (NICAM)

MUTE

Switches the sound on or off

Power Off/Standby

any other programmed
equipment off.

SCAN

Program scan button

DISPLAY

Display ON/OFF

SLEEP

Displaying sleep time,

adjustable

PIP

Digits

Program direct option(when edit
program, every press can set
different sign by turns among the
digits and sign on top of them)

TV/AV

Input source display

SWAP

Switch the current channel to the
last channel you have viewed.

P.STD

(Picture mode option)

S.STD

(Sound mode option)

Program up and down
Or turns your TV

Teletext buttons

buttons which have letters

on top also can use in TV.

Lock button

(enter the Lock Set menu)

Channel list button

EXIT

clears all on-screen displays and
returns to TV viewing from any menu.

TIMER

Time display(only when

there is teletext in TV)

ZOOM

Adjust picture aspect ratio

Note:

This User's Manual covers the functions of the remote controller, including CH+/-,
VOL-/+, MENU, TV/AV and POWER keys for control of program up, program down,
volume decrease, volume increase, menu, TV/AV and power ON/OFF.

MENU

main menu entry, menu exit or
return to next higher level menu.

sound increase

and decrease

- The remote controller cannot be operated unless the batteries are properly loaded.

Function introduction

- When using the remote control, aim it at the remote control sensor on the TV.

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Ensure the remote controller is pointed toward the remote

controller window on the display.

No obstacles should be placed between the remote controller

and the remote controller window.

The effective receiving scope for the signal is 8 meters to the

O

front of the remote controller window, and 45 to the left or right

O

side and 20 above or below the control window.

Use of remote controller:

1. To ensure a normal operation, the remote controller should not

be dropped or damaged in any way .
It should also be kept dry and away from all heat sources.

2. Battery replacement is necessary when the remote controller

acts inconsistently or stops operating the plasma display.

Remote controller

Effective range

above

below

20

20

left

right

front 8m

45

45

Generally speaking, to enjoy a clearer picture, we recommend that you use a
CATV system or an outdoor antenna .In different places, the suitable antenna
type and position are different.

Mixer

additional

purchase

Note
* It is recommended that you'd better use 75

* Don't bind antenna cable and electric wire together.

coaxial cable to remove the

disturbance caused by airwave.

ANT IN

outdoor
antenna

300 twin-lead cable

Antenna adapter

75 coaxial cable

Plug
(additional purchase)

Antenna input

75 standard

coaxial type

External Equipment Connections

If the antenna needs to be split for two Tv`s, install a

2-WaySignal Splitter in the connections.

If the antenna is not installed properly, contact your

dealer for assistance.

To improve picture quality in a poor signal area,

purchase and install a signal amplifier.

Antenna Connection

ANT IN

COMPONENT IN

Pr/Cr Pb/Cb Y L-AUDIO-R

SCART2 SCART1

External Equipment Connection

- To avoid picture noise (interference), leave an adequate distance between the VCR
And TV.

VCR connection

NOTE: All cables shown are not included with the TV.

1. Connect the SCART cables from

the VCR's output jacks to the TV`s
input jacks, as shown in the figure.

2. Insert a video tape into the VCR and

press PLAY on the VCR. (Refer to the VCR
owner`s manual.)

3. Select the input source

by the TV/AV button
on the remote control.

S-VIDEO

Choose Your Connection

There are several ways to connect your television, depending on the components you
want to connect and the quality of the signal you want to achieve. The following are
examples of some ways to connect your TV.
Choose the connection which is best for you.

HDMI/DVI OUTPUT R AUDEO L

RGB-DTV OUTPUT R AUDEO L

YPbPr

R AUDEO

HDMI/DVI VIDEO

VGA

AUDIO

DVI IN

AUDIO

VGA IN COMPONENT IN

Pr/Cr Pb/Cb Y L-AUDIO-R

ANT IN

COMPONENT IN

Pr/Cr Pb/Cb Y L-AUDIO-R

SCART2 SCART1

How to connect

1. Connect the DVD video outputs (Y,

Pb/Cb, Pr/Cr) to the YUV IN jacks on the TV
and connect the DVD audio outputs to the
AUDIO IN jacks on the TV, as shown in the
figure.

2. If your DVD only has an SCART output

jack, connect this to the SCART input on
the TV. as shown in the figure.

NOTE: If your DVD player does not have
component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the TV/AV and VOL+/- button on the

remote control to select SCART mode.

3. Press Play button on external equipment

for program play.

4. Refer to the DVD player's manual for

operating instructions.

-To watch digitally broadcast programs,
purchase and connect a digital set-top box.

How to connect

Use the TV`s YPbPr IN and AUDIO IN jacks,
VGA or HDMI/DVI VIDEO port for video
connections, depending on your set-top
box connections available. Then, make the
corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to

the owner`s manual for the digital set-top
box.)

2. Use TV/AV on the remote control to

select mode.

3.Press Play button on external equipment

for program play.

DVI

DTV connection

DVD connection

External Equipment Connections

DVD

or

Digital Set-top Box

or

or

VGA

AUDIO

VGA IN

AUDIO OUT

L R

How to connect

1. To get the best picture quality, adjust the PC

graphics card to (>1024

2. Use the TV`s VGA port for video

connections, depending on your PC connector.

If the graphic card on the PC does not output

analog and digital RGB simultaneously, connect
only one of eitherVGA to display the PC on the
TV.

If the graphic card on the PC does output

analog and digital RGB simultaneously, set the
TV to eithe ; (the other mode is set to Plug
and Play automatically by the TV.)

3. Then, make the corresponding audio

connection. If using a sound card, adjust the PC
sound as required.

How to use

1. Turn on the PC and the TV.

2. Turn on the display by pressing the POWER

button on the TV's remote control.

3. Use TV/AV on the remote control to select PC.

x768),60Hz.

IN

IN

r VGA

External Equipment Connections

PC connection

or DVI source.

4. Check the image on your TV. There may

be noise associated with the resolution,
vertical pattern, contrast or brightness in
PC mode. If noise is present, change the
PC mode to another resolution, change
the refresh rate to another rate or adjust
the brightness and contrast on the menu
until the picture is clear. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult the
manufacturer of the PC graphic card.

NOTES:
1 Use a VGA cable.
2 Avoid keeping a fixed image on the TV's

screen for a long period of time. The fixed
image may become permanently
imprinted on the screen.
3 The synchronization input form for
Horizontal and Vertical frequencies is
separate.

Resolution

Frame
frequency
(Hz)

Line
frequency
(Khz)

VGA

SVGA

XGA

640*480 31.5KHz 60Hz

800*600 37.9KHz 60Hz

1024*768 48.4KHz 60Hz

Mode

Resolution

AUDIO OUT

R L

WOOFER

AUDIO OUT

R L

WOOFER

External Equipment Connections

Connect Loudhailer

1. Face the PDP screen upside down on a

clean blanket or a bracket and pay

attention not to indent the casing. Lay the

two speaker aside of the PDP.

2. Lay a bracket on the speaker

and hind rind, Fix the screws to the speaker

and hind rind.

3. Connect the speaker cable to the

speaker terminal of PDP TV and the

speaker terminal, and insert the

connecting cable into the terminal slot,

Release the speaker terminal, and ensure

that the white connecting cable is inserted

in the terminal slot marked red and black

connecting cable is inserted in the black

terminal slot, and that anode and cathode

poles are correctly connected.

nnectent

Loudhailer

Annectent

bracket

Connect Woofer

Woofer

1. Take the woofer out, and place it the hind rind. (See picture)

2. Connect cable to the woofer terminal and PDP TV terminal,
and insert the connecting cable into the terminal slot.

- The following chart illustrates only, please with your kind is purchased.

Power source

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for
operation on AC. Insert the AC cord plug into
a standard polarized AC outlet.

NOTES:

Never connect the AC line cord plug to other

than the specified voltage. Use the
attached power cord only.

If the polarized AC cord does not fit into a non-

polarized AC outlet, do not attempt to file or cut
the blade. It is the user`s responsibility to have
an electrician replace the obsolete outlet.

If you cause a static discharge when touching

the unit and the unit fails to function, simply
unplug the unit from the AC outlet and plug it
back in. The unit should return to normal operation.

Polarized AC Cord Plug

AC Outlet

Wider Hole
and Blade

You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.

Connecting Headphones

External Equipment Connections

Note

Prolonged use of headphones at a high volume

may damage your hearing.

You will not receive sound from the speakers

when you connect headphones to the system.

Plug a set of headphones into the 3.5mm
mini-jack socket on the rear panel of the set.

ANT IN

SWITCH
AC-INPUT

Switching ON/OFF the TV set

1 Please press down the power switch to

switch on AC power supply and the power
indicator will light .

2 If the indicator is lighting in red, press

button on the remote controller again.

3 If you want to exchange to standing by

status, please press down button on the
remote controller.

4 Disconnect the power supply or unplug the

television if it is intended to completely cease
the television performance.

Set up your TV

Choose the Menu Language

When you start using your set for the first time,
you must select the language which will be
used for displaying menus and indications.

1 Press the MENU and CH+/-button to select

the Function menu.

2 Press VOL+ to enter.
3 Press CH+/-button to select Language.
4 Select a particular language by pressing

VOL+/- button repeatedly.

You can choose one of 13 languages.

5 When you are satisfied with your choice,

press MENU button to return to previous or
press EXIT button to return to TV viewing.

-There are several options you might need to set up in order for your TV to work
properly. Read the instructions that follow.

-In the manual, the OSD(on screen display) may be different from your TV`s,
because it is just an example to help you with the TV operation.

CH+

CH-

VOL-

VOL+

MENU

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Choose the input source

Press TV/AV button on the remote

control, the menu appears on the
screen. Then press CH+/- to select
the TV item, and press VOL+ to
ensure it.

Source

TV
SCART1
SCART2

AV

HDTV

VGA

HDMI

USB

Select input modes

When menu parameter is to be modified, the set
picture and sound status and preset program will
be remembers as menu exit.

Memory function

If you hope to enjoy the picture from the external
input source, before to select the source, you need
to connect the devices, otherwise, when you select
the source, the none or no signal will appears on the
screen.

Before watching TV program, you need to ensure
your TV in TV mode.

TV: the input source from ANT IN terminal output.
SCART1: the input source from SCART1 terminal

output.
SCART2: the input source from SCART2 terminal
output.

AV
HDTV: the input source from YPbPr terminal output.
PC: the input source from VGA IN terminal output.

HDMI: the input source from HDMI IN terminal output.
USB:

the input source from side AV terminal output.

the input source from USB terminal output.

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

This TV set has three methods to set channels, which are respectively full automatic,

manual search fine tune.

In this section, how to use the remote control to set channel is explained. You can

also use buttons on the TV set to set channel.

Full automatic search mode

Automatic search

1 Press MENU button and then CH+/- button, the icon to

TUNING menu.

2 Press the VOL+/- buttons to enter submenu, and press

CH+/- button to select "country" first according to yourself
that means you have selected the sound system, this is
useful especially for France ), and then press CH+/­button to select "Auto Search" item.

3 Press the VOL+/- button to ensure automatic search

with higher level.

After the s arch has finished, ae ll channels now playing
program will be automatically preset in order.

Note : the TUNING menu will be only operated in normal
TV mode.

VHF-L 188.16 MHz

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Auto Search

Program Table

Country

England

Note:

If you have set Tuner Lock
in Lock Set menu. Password
must be entered when
operating menu tuning.
Otherwise there will be Tuner
Lock display on screen.

Tuning menu

PIP Source
PIP Position

HDMI/DVI
Center

Tuning menu

Program Table

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

1 Press MENU button and then CH+/- button, the icon to

TUNING menu.

2 Press VOL+/- button to

enter submenu, and press
CH+/- button to select
"Program Table", press
VOL+ button to enter.
Or press CH.LIST button
on remote controller.

3 Press CH+/- button to

select the edited channel,
and press button
corresponding to edit.
(Red button: delete channel;
Green button: copy channel;
Yellow button: Name channel;
Blue button: Swap)

Program Table

Red: Del; Green: copy; Yellow: Name; Blue: Swap

001
002
003
004
005
006
007
008
009
010

delete name

Copy channel

Name channel

Press CH+/- to select the channel, and press the green button
on the remote controller, then press CH+/- button to select
the channel to copy, press again the green button then press

MENU button to ensure.

Swap channel

Press CH+/- to select the channel, and press the red button
on the remote controller to delete, then press MENU button
to delect name.

Press CH+/- to select the channel, and press the yellow button
on the remote controller, and press the yellow button to display
the digital and letter list, press Vol+/- or CH+/- to select the
desired digital or letter, press the yellow button to exit list,
then press MENU button to ensure.

Press CH+/- to select the channel, and press the blue button
on the remote controller, then press CH+/- button to select
the channel to swap, then press again the blue button to
ensure.

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Auto Search

Program Table

Country

England

PIP Source
PIP Position

HDMI/DVI
Center

Manual search

If excessive channel signals of unwanted programs
are received in local area, manual search function is
recommended.

1 Press CH+/- buttons or the NUMBER 0-9 button to

choose desired searching frequency.
(regard channel 18 as example).

2 After calling up the

TUNING menu, press
CH+/- button
to select

item.

"Tuning

Program"

3 Press CH+/- to select

Manual Search item,
Press VOL+ button to
enter the desired
frequency and press
the digital button to
adjust.

4 press MENU button to return to previous or

press EXIT button to return to TV viewing.

Tuning menu

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Program Number
Edit Name
Color System

Sound System
Manual Search
Fine Tuning
Skip

Off

18

C 28

AUTO

D/K

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

62.25MHz

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Auto Search

Program Table

Country

England

PIP Source
PIP Position

HDMI/DVI
Center

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Fine Tuning

If the picture and/or sound are poor, try using the FINE
TUNING feature. Do not use this feature unless reception
is poor.

1 Press CH+/- button or

NUMBER 0-9 button to
choose desired channels

2 Press MENU button

and CH+/- button, till the
TUNING menu shown on
the right display on the
screen.

3 button

to enter submenu, and
press CH+/-button
to select Tuning Program
item, and then press
VOL+ to next submenu,
and press CH+/-button
again to make the
icon to Fine Tuning.

Press VOL+

4 Press VOL-/+ button

all through to carry out fine
tune, till the best picture and sound are obtained, then
loosen the button.

18
c 28
AUTO
BG

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Program Number
Edit Name
Color System

Sound System
Manual Search
Fine Tuning
Skip

Off

C 28
AUTO

D/K

Tuning menu

62.25MHz

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Auto Search

Program Table

Country

England

PIP Source
PIP Position

HDMI/DVI
Center

18

You can watch TV program in a presetting channel.

How to select the desired program

1 Using "Program number" buttons

.

Press digit button to select the program.
If 2-digit or 3-digit programs are selected , press
digit buttons you needed continuously within 3
seconds
If selected channel program is set at Lock on mode
and no password has been entered after initiation of
the television, the screen will indicate require password
entry. If wrong password is entered, channel selection
will fail and previous program will still stay on the screen.
The program locking password can be modified in the
preset menu and previous password will be required.

2 Using the CH+/- button.

Press the CH+ button to select a channel number in

number increasing direction.
Press the CH- button to select a channel number in
number decreasing direction.

(Note: If Skip is ON on one channel, press CH+/- button,

the channel will not appear.)

How to select the desired sound

Press the VOL-/+ button on the remote controller or
the front of the TV set to adjust the volume level.
The range is 0~100. When the volume buttons are
pressed the volume level is displayed automatically
on the TV screen.

Tuning menu

Volume

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

If the colour of some channel is abnormal

Usually this should be set in the auto position. However
if the colour displayed on the screen are incorrect, you can
manually select the correct colour system.

Press the CH+/- button to select ound System", then press
the VOL-/+ button to select the correct sound system.

"S

Press VOL+/- button to select in turn.D/K, I, B/G, M

If sound is abnormal

If picture color is abnormal

Press the CH+/- button to select Color System", then press
the VOL-/+ button to select the correct color system. In
general, you can set it as "AUTO
Press VOL+/- button to select AUTO, NTSC, SECAM,
PAL60 and NTSC4.43 in turn.

"

".

PAL,

Press the MENU CH+/-and
VOL+/- button, till the Tuning
Program menu shown on the
right will display on the screen.

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Program Number
Edit Name
Color System
Sound System
Manual Search
Fine Tuning
Skip

Off

C 28
AUTO

D/K

Tuning menu

If current program is to be named, press VOL-/+ button to
select position you want to change and press digits to change,
press MENU button to ensure it.

Edit Name

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

18

3. press VOL-/+ button to set Skip On.

And press menu exit.

After the programs are presetting, you can skip some
programs so that to select your favorite channels only.

1. Press CH+/- button or

Direct-digit Choosing
button to select a
channel directly (take
channel 18 for example).

If you want to recover the skipped channel

1. Use Direct-digit Choosing button to select the number
of the channel to be recovered.

2. Do the above steps again.

3. Press VOL+/- button to set Skip Off.

Skip

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Program Number
Edit Name
Color System

Sound System
Manual Search
Fine Tuning
Skip

Off

18

C 28

AUTO

D/K

2.

Press MENU CH+/­and VOL+/- button,
till the Tuning Program
menu shown on the
right will display on the
screen.

Tuning menu

Program swap

1 Suppose the channel number you

used just now is 8 and the channel
number you are using is 18 (as shown in
the figure).

If you want to return to the last

watched program channel 8, you can
simply press the swap button.

If you want to return to channel 18,

press the button again. Through this
function, you can easily change
between the channel you are using and
the channel you used last time.

2

3

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Swap function enables quick swap to the last watched program.

Picture menu

How to customize your own picture status

Brightness
Contrast
Sharpness
Saturation
Hue(only in NTSC mode)

Dark
Weak
Soft
Shallow color
More purple

Bright
Strong
Sharp
Deep color
More green

How to select picture modes

You can quickly select the desired picture mode from
three preset modes and one customized mode.

Press the P.STD button to call up
Video mode menu, and press
CH+/-button to select the
desired picture quality. Four kinds
of picture modes (i.e.,
"Soft", "Bright", ) can
be selected in turn.

"Normal",

"Personal" ,

1 Press MEUN button and

then CH+/- button , till the

menu shown on
the right display on the
screen. Press VOL+/- to
enter.

PICTURE

2 Press the CH+/- button

to select the item to
adjusted, then press the
VOL-/+ buttons to obtain
the desired effect.

Personal

Soft

Bright

Normal

A spare setting that can be adjusted to personal status

Designed for rooms that have good all round lighting

Designed for night time low light viewing

Designed for rooms with high ambient lighting such
as daytime sport;

Note: 1. the hue item is available only in
NTSC system.

2.the video mode, the saturation,
the hue and the sharpness items are no
available in VGA and DVI mode.

NOTE these items are adjustable only when the "video mode" is

set as "personal".

Press VOL- Press VOL+

Video Mode

Bright

Normal

Soft

Personal

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

PICTURE

Video Mode

Personal
Contrast
Brightness
Saturation
Hue
Sharpness
Noise Reduction

Auto

50
50
0
0
0

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Noise Reduction

1 After calling up the

Picture menu, press
CH+/- button to select

item.

"Noise Reduction"

2

Press VOL+ to enter

the list. Select Off, Auto

Weak

according

to the image noise.

, Medium or

Strong

3 Press MENU return

to the picture menu.

Automatically filters out and reduces the image noise
and improves picture quality when receiving weak
video signals.

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

PICTURE

Video Mode

Personal
Contrast
Brightness
Saturation
Hue
Sharpness
Noise Reduction

Auto

50
50
0
0
0

Picture menu

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

To choose sound modes

Press the S.STD button to call up
Audio mode menu, and press
CH+/- button to select the
desired sound quality. Four kinds
of sound models (i.e., Music

Personal , Standard and
Hall ) can be selected in turn.

,

Sound menu

Sound mode

Sound quality

Personal

Standard

Hall

Music

A spare setting that can be adjusted to personal tastes

Designed to reduce the bass and treble which
enhances the voice for news programs

Enables extra bass and treble to enhance the movie
experience

Normal sound with moderate bass and treble setting

You can quickly select the desired sound mode from
three preset modes and one customized mode.

Audio Mode

Music

Standard

Hall

Personal

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

To balance right and left sound of the television.

The intermediate value is 0. When indication value of Balance
increases toward+50, sound of the right and left speaker
becomes stronger and weaker, respectively. When indication
value of Balance decreases toward -50, sound of the right and
left speaker becomes weaker and stronger.

Balance

MENU

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

PICTURE

Volume
Balance
Audio Mode
Five Equalizer
Surround
Auto Volume
Woofer

Music

0
0

0

0

Off

1 Press MENU button and

then CH+/- button to select
AUDIO menu.

2

Press VOL+ to enter the

submenu. Press CH+/- button
to select Balance item. Press
VOL+/- to adjust the desired
level.

3 Press MENU return

to the picture menu.

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Setting Five Equalizer sound

1 Press MENU button and

then CH+/- button to select
AUDIO menu.

2 Press CH+/- button to

select "Five Equalizer", then
press VOL+ buttons to enter
the submenu.

3 Press CH+/- button to

select frequency to adjust,
then press VOL+/- buttons to
adjust the value data.

4 When you are satisfied with

the setting, press MENU button
to return to the previous menu.

The surround sound feature expands the audio listening
field wider and deeper to create exceptional sound
quality from the TV`s speakers.

Repeated step 1-2, and press CH+/- to select surround, and
then press VOL+/- to set the desired value.

Select Surround from -50 to +50 . When intermediate value
toward +50, the effect will be distinctness.

The sound settings can be adjusted to suit your
personal preferences.

MENU

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

PICTURE

Volume
Balance
Audio Mode
Five Equalizer
Surround
Auto Volume
Woofer

Music

0
0

0

0

Off

Setting the surround sound

Sound menu

MENU

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

PICTURE

0

0

120Hz
500Hz
1500Hz
5000Hz
10000Hz

0

0

0

Five Equalizer

When you need to pay attention to surrounded sounds, or
there is a telephone calling you or there are some guests
visiting you, the sound elimination (mute) function is very
convenient.

How to eliminate sound

1 Press the MUTE button on

the remote control and "Mute"
type face will display on the
lower part of the screen. At this
time, the sound of the TV set
is turned off.

2 If you want to recover the

sound, press the MUTE
button again or directly press
the VOL-/+ buttons.

Each broadcasting station has its own signal conditions,
and so it is not easy for you to adjust the volume every time
the channel is changed. This feature lets you automatically
adjust the volume of the desired channel and reduces the
volume differences between channels and programs,
providing a more constant overall level. This will also reduce
the dynamics of sound.

Woofer is a speaker that complements front speaker`s
reproduction capability of low-pitched sound.
Select Woofer to set the value of woofer from 0 to 100.

Repeated step 1-2, and press CH+/- to select ,
and then press VOL+/- to set as Off or On.

Auto Volume

Repeated step 1-2, and press CH+/- to select Woofer,
and then press VOL+/- to adjust the desired level.

Mute

Setting the Auto Volume

Setting the woofer sound

Sound menu

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Timer setting

2 Press CH+/- button select "Timer", press VOL -/+

buttons to select hour or minute position; then press
digits buttons to set the value of hour or minute;

3 Press MENU button to return the previous menu.

The clock will only work if the TV set is turned
on or in standby. When the set is disconnect
from the power supply or is turned off by the
main power on the rear panel, the clock loses
power and will need to be reset when the power

1 Press the MENU button and CH+/- button, till the TIMER

menu display on the screen.

Indication will appear on the screen 1 minute prior to
expiry of set time.
Suppose Time Off is set, and indication is as follows:

Time Off

NOTE:

1.If Timer option is setting,

the time you set for Time
Off/Time On will be a point of
time. Otherwise, if Timer is
not set, the time you set for
Time Off/Time On will be a
period of time.

2.Sleep Off/ Time Off can

not be set at simultaneously.
If both of the two are set, the
later setup will be operation.

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

PICTURE

Timer
Time Off
Time On
TimerOn Prog
Timer Prog
Prog Num

Timer menu

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

On/off timer \Timer on Prog\ Timer Prog

1 Press MENU and VOL+/- button to call up the TIMER menu

on the screen.

2 Press CH+/- button to select "Time On", press VOL-/+

buttons to select hour or minute position; then press digits
buttons to set the value of hours or minutes.
(take 19:00 as an example)

3 Press CH+/- button to select "Timer On Prog", then

press VOL-/+ and program direct number buttons to select
your desired channel (take 8 as an example).

4 press CH+/- button to select "Timer Prog", press VOL-/+

buttons to select hour or minute position; then press digits
buttons to set the value of hours or minutes.

5 Repeat step 1-2 to set Time Off .(Take 22:30 as an

example)

You can set the On/Off timers so that the set will :

Switch on automatically and tune to the channel of your choice at the time

you select.

Switch off automatically at the time you select.

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

PICTURE

Timer
Time Off
Time On
TimerOn Prog
Timer Prog
Prog Num

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

PICTURE

Timer
Time Off
Time On
TimerOn Prog
Timer Prog
Prog Num

Timer menu

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

It is possible to select language, OSD transparent, position and screen display
of the menu as follows:

Function menu

1. Press MENU button once, and the CH+/- button until the

following menu appears on the screen:

OSD language option

Repeat step 3 and 4 to select the language you wanted from
the 13 kinds of languages.

Menu Timeout

Repeat step 3 and 4 to select the time of the OSD display in
sequence as follows: 5 seconds,15 seconds, 10seconds,
20seconds, 25seconds, 30 seconds and 40 seconds.

Menu Background

Repeat step 3 and 4 to select Transparent / Opaque
background of OSD.

Blue Screen

Repeat step 3 and 4 to select Blue Screen On/Off.If you
select ON, when no signal, the background is blue; if you
select OFF, when no signal, the background is dark.

2. Press VOL+ button on the remote controller to call up the

FUNCTION menu.

3. Press CH+/- to select desired item on the menu.

4.Press VOL+/- to adjust the item you have selected.

Function setup

MENU

FUNCTION

AUDIO

ADJUST

TUNING

TIMER

PICTURE

West Europe

Language
Menu Timeout
Menu Backgroud
BlueScreen
Calendar
TeleText Language
Restore Default Value

English
15 seconds

Transparent

Off

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

2005-01-01

Sun. Mon. Tue. Wed. Thu. Fri.

Sat.

1

8765432
15
22
29

14
21
28

13
20
27

12
19
26

11
18
25

10
17
24
31

9
16
23
30

Function menu

Calendar display and check

Repeat step 3 and 4 to enter Calendar menu as follows:

Press VOL+/- to select among year, month and day,
and then CH+/- to adjust them.

Teletext Language

Repeat step 3 and 4 to select from 6 kinds of languages.
(West Europe/East Europe/Cyrillic/Greek/Arabic/Persian.)

Restore Default Value

Repeat step 3 and 4 to return the factory mode.

Function setup (continue)

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

To choose picture aspect ratio

Normal

4:3 mode

Press ZOOM button to select the
desired picture ratio. Three kinds
of models (i.e.,

Wide screen and 4:3

mode ) can be selected in turn.

aspect ratio

"Normal", """

"

1 Press MENU button and then CH+/- button , till the ADJUST

menu shown on the right display on the screen.

1 Using ZOOM button.

2 Using button.the MENU

Wide screen

2 Press CH+/- button to select Display Mode option,

then press VOL+ button to select the desired option.

Note: Under the HDTV

VGA and DVI signal,
there are only Normal
and 4:3 mode to adjust.

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

PICTURE

Display Mode
Adjust
RGB
Default
Auto Sync
Color Temperature
Black Stretch

Off

Normal

Normal

Adjust menu

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

It does not
work on
the TV
mode.

Aspect ratio

Picture effect

Normal

Widescreen

4:3 mode

no cut out on input signal picture with un-changed
scale displayed on the screen(to keep the scale,
maybe only the center area of the screen is active)

input signal is vertically cut out by 10% and picture's
center area is non-linear zoomed to fill the whole
screen

Choose 4:3 when you want to view a picture with an
original 4:3 aspect ratio, with black bars appearing at
both the left and right sides.

PC, HDMI/DVI:

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

PICTURE

Display Mode
Adjust
RGB
Default
Auto Sync
Color Temperature
Black Stretch

Off

Normal

Normal

In PC and HDMI/DVI input mode, H-Position and V-Position can be adjusted to eliminate
transverse line interference and decentered picture as follows:

1. Press MENU button and CH+/- to call up the ADJUST

menu. as follows:

2. Press VOL+ button on television or remote controller

to enter the adjust menu of picture position setup.

3. Press CH+/- button for desired adjust parameter option.

4. Press VOL+/- for desired adjust parameter option until

satisfactory value is achieved. When VGA signals are received,
the automatic mode is used for parameter adjustment.

Only be adjustable
in the PC,HDMI/DVI
mode.

H-Position and V-Position adjust

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

PICTURE

Adjust

H Size
H Position
V Size
V Position
Fine Tune

Smoothing

H Size Horizontal size of picture can be adjusted in this item.

H Position: Horizontal position of picture can be adjusted in this item.
V Size: Vertical size of picture can be adjusted in this item.

V Position: Vertical position of picture can be adjusted in this item.

Fine Tune: Adjust phase to the best effect suiting for VGA signal.
Smoothing: make the line of the picture smooth.

Adjust is opted for adjusting H-Position and V-Position
as well as relative parameters in VGA and DVI modes.

Adjust menu

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

1) RGB is opted for adjustment of the numerical value of red,
green and blue in PC,HDMI/DVI mode.

2) Default is opted for adjustment of parameters to delivery
setup in PC mode.(After the operation, complete will be on the
right of the operation)

3) Auto Sync is opted for adjustment of picture location
frequency and phase parameters in PC mode.(After the
operation, complete will be on the right of the operation)

RGB/Default/Auto Sync

Color Temperature

Press CH+/- to make the icon to Color Temperature,
and press VOL+/- button to select.

There are four kinds of
modes (i.e., "Normal",
"Cold" ,"Green","Warm" )
can be selected in turn.

This will increase or decrease Warm (red) and Cold
(blue) colors to suit personal preferences. Select Cold
to give the white colors a blue tint, Normal to give the
white colors a neutral tint, Warm to give the white colors
a red tint. Green to give the white colors a green tint.

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

PICTURE

Display Mode
Adjust
RGB
Default
Auto Sync
Color Temperature
Black Stretch

Off

Normal

Normal

Black Stretch

Black Stretch-(Automatically Increases the Contrast
Rage)

Adjust menu

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Press H.LOCK button, Password will appear on the screen.

The initial password of the television is 0000 and security
default password is 9443. then enter Lock Set menu.(as
follow)

The television has the function of security default lock.
Password needs to be entered when the program lock mode
is to be set.

Note: If the password is not correctly entered, you will be
required to reenter the password and the cursor will stay at
the first place.
The security default password is 9443.
Press EXIT to cancel the window.

Password

Off

Tuner Lock
Prog Set
Prog Num
Source Lock
Child Lock
Max Volume
Clear Lock

LOCK SET

Off

1

Off

100

The password can be changed.
After entering the Lock set menu, Press CH+/- to select
password, Press vol+/-, the screen will display the follow.

If correct password is entered, the screen will display the
follow.

Press digital button to set the new desired password, and
the screen will display the follow.

If the desired password is entered correctly twice, the old
password will be changed. If the desired password is not
correctly entered twice, the screen will display New ----, then
you have to reenter the password.

Lock setup

How to use the password function

Note:

If Clear Lock is activated,
the password setup
cannot be changed.

To set new Password

Old ----

New ----

Repeat ----

The television has the
function of security
default lock. Password
needs to be entered
when the program
lock mode is to be
set.

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Prog Num

Prog Num is opted for setting up preset channel. Press CH+/-
button to select Prog Num. Press VOL /- button, to select
channel number.(The item is not available except TV signal.)

Source Lock

Source Lock is opted to hinder external input modes, such as
AV, Scart and VGA. Press CH+/- button to select the option,
and press VOL+/- button to display Source Lock menu as
follows:

SCART1

Off

SCART2

AV

VGA

HDMI

Source Lock

Off

Off

Off

Off

Press CH+/- button to select desired option. Press VOL+/-
button to set up the mode of Source Lock. If some Source Lock
is set ON, the mode will be entered and the screen will display
blue background with the mute mode activated and Lock. In
lock on mode, when screen is blank, icon Lock will be always
displayed on the screen. If lock mode is to be verified, enter
Source Lock submenu and set relative mode off, or select Clear
Lock in the Lock Set Menu.

Prog Set

Prog Set is opted for setting up start channel. Press CH+/- button
to select Prog Set. Press VOL+ button, sources can be
swapped in TV/SCART1/SCART2/AV/HDTV/VGA/HDMI mode.
After setup, the set mode will be entered if the television is
switched off and on again. To set Off, the television will memory
the off-channel.

/-

Tuner Lock

Press CH+/- to select Tuner Lock and VOL+/- to set On/
Off. (To set On, some operation such as search will be
not available. When enter the TUNING menu, Tuner Lock will be
on the screen, and the time will be the same with the main menu if
no operation. If you want to operate TUNING menu, you need to
enter the Lock menu to set Tuner Lock Off or operate Clear Lock.

Lock setup

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

HDTV

Off

Max Volume

Press CH+/- button to select Max Volume. Press
VOL+/- button for adjustment between 0 100. If a

certain value is set, when volume is being adjusted,
the sound value can not exceed maximum volume
value. If current volume is over Max Volume, when
Lock Set menu is set, current volume will become set
maximum volume. If current volume is below
maximum volume, customer set volume will stay
unchanged.

Clear Lock

Press CH+/- button to select Unlock mode. Press
VOL+/- button to unlock all set modes, setting all lock

options to off, and the maximum volume returns to 100.

Child Lock

Press CH+/- button to select Child Lock.
Press VOL+/- button to set On or Off mode. If lock on
mode is set, Child Lock is in activated automatically.
In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child
Lock, which can be erased by press of EXIT button. 5
seconds later after the latest press, the screen
display will disappear automatically. The Child Lock
mode can be resumed by entering Lock Set menu, set
Child Lock On or Off.

Lock setup

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

PIP position

Selecting an Input Signal Source for PIP

Main Picture Sources Available Sub Picture Sources

TV, SCART1, SCART2,
HDTV,PC

HDMI/DVI

Each press of VOL+/- button changes the main source.

NOTE:

If to use PIP function, you
need to select one of two in
main picture source and
available sub picture source;
When the VGA is be sub picture,
the resolution must be more
800x600 dot;
When the HDMI/DVI is be sub
picture, the DVI to HDMI is
no useful.

Picture in Picture

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

1 Press MENU button and then

press CH+/- button, till the
TUNING menu shown on the
right display on the screen.

2 Press the CH+/- button to select

PIP Position item.

3 Press the VOL+ button repeatedly

until desired position is achieved.
The sub picture moves
Left Top/Right Top / Right Bottom/
Left Bottom /Center.

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Auto Search

Program Table

Country

England

PIP Source

HDMI/DVI
Center

PIP Position

Press the PIP button on the remote control to swicth to PIP
function.

Preparation

1 Press MENU button and then

press CH+/- button, till the
TUNING menu shown on the
right display on the screen.

2 Press the CH+/- button to select

PIP Source item.

3 Press the VOL+ button repeatedly

until desired source is achieved.

AUDIO

ADJUST

FUNCTION

TIMER

MENU

PICTURE

TUNING

Tuning Program

Auto Search

Country

England

HDMI/DVI
Center

Program Table
PIP Source
PIP Position

TV,HDTV,PC

HDMI/DVI/SCART(RGB)

SCART(RGB)

TV,HDTV,PC

HDMI/DVI

TV, SCART1, SCART2, HDTV,PC

Others functions

Display function

NICAM

If the broadcaster is transmitting
Bilingual sound service. The
button on the remote controller will
allow up to 2 separate languages
to be selected.
You can press the
button to make a choice.

/

/

If current program number, color
system and sound system are to be
displayed on the screen, press
DISPLAY button, and all the related
information will appear at right up
corner of the screen.
If the DISPLAY button is pressed
again, the displayed information will disappear.
(If the program is named, its name will also appear ).

Auto program scan

1 If you want to select a

desirable program, you may
scan all the TV programs in
memory. You can simply press
SCAN button to do this.
Press scan button once, there
are nice pictures on the screen.
Press scan button again, there
are sixteen pictures on the
screen.

2 If you want to stop the

function during auto tunning,
simply press SCAN button
again.

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

3

AUTO
BG

Sleep

1. Press SLEEP button repeatedly to select the number

of preset minutes, the timer will be set in sequence:
0Min 15Min 30Min 60Min 120Min

240Min 0Min

2. After the sleep time is set, the Indication will appear

on the screen 1minute prior to expiry of set time.

Auto switch-off function

If an empty channel is selected or the TV programs are
ended for the day, the power will be switched off 5 minutes
later automatically. If the "OFF TIME" is setting, it will be
switched off according to the presetting time. The auto
power off function does not work under input.

Under PC state, if no signals input, the television will
enter standby status 1minutes later automatically.

video

Picture Still

The TV set will switch automatically to standby at the
preset time with the SLEEP time on. You may set the
sleep time, Operate as follows:

3 If remaining time of set timer is to be displayed, press

SLEEP button again.

The TV set will switch off automatically at the preset time,
press CH+/- button to turn on again.

Note:

The ON TIME setup and
the SLEEP setup is
absolute one another.

4 If to cancel sleep time, press SLEEP button repeatedly to

set as 0.

Press Still button, the picture will be still; if to cancel, press Still
button again, the picture will resume.

Others functions

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

Time off

Teletext is an information system, broadcast by certain channels,
which can be read like a newspaper . It also provides subtitles for
people with hearing difficulties or those who are unfamiliar with the
language in which a particular programme is being broadcast (cable
networks, satellite channels, etc.).

You can press button into TEXT mode,
press again to leave TEXT mode. All menu
related functions are not available in TEXT
mode. Only a few direct button control
functions are available in TEXT mode, they

1 Page up/down

Result: Use the CH+/- buttons to browse next
or previous page.

2 Page number entering

Result: To select a teletext page either directly
enter the page number using the
numeric button pad on the remote
control or use CH+/- buttons, or the
colored Fast Text buttons.

Teletext functions

Teletext function operation

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

(MIX)

While in Teletext mode press the button will show the teletext data
superimposed on top of the TV picture. Press the button again to revert
back to Full text.

(HOLD)

Pressing the button will stop the teletext page automatically updating.
This feature is very useful where there are several teletext pages or
data on the same page number.

(Fast text colored buttons)

Fast text automatically displays the four most commonly used pages that
the broadcaster thinks that you may want to choose next. Press the same
coloured button on the remote control as the coloured link at the bottom
of the teletext page to go directly to that page.

(SIZE)

Pressing the button to change from different screen display size.
This feature is very useful as it magnifies the image making the characters
easier to read.

(REVEAL)

Pressing the button will reveal hidden text. This feature is used to reveal
information such as answers to Teletext on-line interactive puzzles.

TIMER

While in normal TV mode only, pressing the button TIMER will display the
teletext time in the top right corner for a few seconds.

(TEXT)

Press the button on the remote control to turn teletext On/Off.

(SUBTITLE)

Pressing the button will get the teletext decoder to automatically
search for the subtitle page. In NZ the subtitle is usually page 801.

(INDEX)

Press the button to show the list of teletext contents

Teletext functions

Stream media broadcast system

1. Supporting equipment

1.Equipment supporting Mass and
Storage agreements include USB,
mobile hard disk, card reader, some
MP3 and digital camera.

2.Equipment supporting PTP
agreement includes some digital
camera.

2.

2.1 Supporting media:

picture, music, MPEG4, MPEG2
and MPEG1;
Supporting file format
*.Avi, *.DIVX, *.MPEG,*.DAT,
*.MP3, *.WHA, *.JPG and *.JPEG.
Due to particularity of file code and
file mode, It is possible that some files
cannot be read.

2.2 If Pic & Music mode is activated,
relative media file format will include
JPEG and MP3 files. After Picture is
selected, MP3 files set for play will
open both music and picture files for
sync play performance. As some files
must be read while music is being
played, the speed of picture
operation response might be affected.

3.Before starting operation, verify
USB storage device is of FAT32 and
FAT file system format. At present,
this television does not support NTFS
and the file systems of other format.

4.Many movie files use suffix of AVI and
MPG. However, many kinds of format
are used for internal files. This
television can only play some AVI and
MPG files of this format. Those files with
suffix of dat are not movie files, but data
files used by computers, and cannot be
played for movies.

5.External card reader supports most
digital cards available in the market.
Readable digital cards are classified
according to the property of card
readers and can be connected to mobile
hard disks (working voltage 5.0V,
working current not over 500mA).

6. Some time the television operation
may be halted due to excessive rate of
information code errors. In such case,
restart the system. As there are many
nonstandard USB mobile devices in the
market. If this kind of USB mobile
devices are used in the stream media
play system, the problem of
identification failure might occur. The
same problem may also happen with
computers, not televisions.

7.It is suggested that the external
devices with USB.0 interface be used to
improve velocity of information reading
and continuity of information play.

Stream media play prepare

45

Card data protection

- Do not remove the card/USB device when the content is being read or when

browsing. Such action may damage the memory card/USB device.

- Do not touch the terminals on the back of the card.

- Always insert a card in the correct direction. Failure to do so may result in
damage to the card and the unit.

- Do not subject the card to excessive pressure or strong impacts.

- Malfunctions of the unit or card may result in data loss or damage to the card.

- Haier shall not accept any liability for damage or loss of stored data.

Removing USB device

1

press menu exit the menu.

3 Remove the memory card/USB device.

Press button to select Remove Cardor
USB, and press ENTER button to ensure it.
2

Warning:

Memory cards can be swallowed
by young children. Do not allow
children to handle memory cards.
Please remove the memory card
immediately after use.

Stream media system setup

Note: Memory cards or USB devices are not
supplied with this TV.

1 Insert USB in one of the card slots at the right
side or the back bottom of the TV.
2 Insert it to be clicked in.
When a memory card or a USB device is inserted,
the Stream media system menu is displayed
automatically, see further.

SETUP

File copy

Card

USB

Remove Card

Press ENTER button to play this devices

Remove USB

AAA Multimedia Player

Stream media broadcast system

SETUP

File copy

Card

USB

Remove Card

Press ENTER button to remove Card devices

Remove USB

AAA Multimedia Player

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

SETUP

File copy

Card

USB

Remove Card

Press ENTER key to play this devices

Remove USB

AAA Multimedia Player

1. Press TV/AV button, and then

to press CH+/- to select USB
option, press CH+ button to
enter media play system.
(As follow)

2. Press / button to select

the desired option.

3. Press button to enter

desired option.

4. Press EXIT to return.

5. If to exit USB system, you need to return to source

menu, and press digit 1button to watch TV.

Note:

If on operating, the
saver will appears on
the screen.

1. Press button to select the item with up or down.

2. Press button to ensure the desired option.

3. Press button to operate play quickly or slowly.

4. Press button to make the program stop.

5. Press ZOOM button to make zoom, and press

or button to enjoy the detail.

6. Press EXIT button to stop the program play and

return to previous menu, and press continuously it to
return to main menu.

To operate the menu

To start the media play

Stream media broadcast system

3. Press button to select

Picture item.

4. Press button to enter

the menu of play.

5. Press again button to

select desired enjoy picture,
and then press button
to enter the play menu.

6. On display, Press to

select the speed of play.
(Normal, slow, fast).

7. Press button to swap

the picture of next and previous.
Press EXIT button to return.

To play picture

JPEG

0016.JPG

Play

Slideshow speed standard

IMAGE

To enjoy the picture detail

1. After selecting the picture to play, press ZOOM to

select desired zoom.

2. Press EXIT button to exit the display, and then

press or to move and enjoy the picture detail.

To select stream media broadcast system

1.Press button to

select "Card"or "USB".
(The device be inserted
and identified).

2. Press button to

enter adjusted option.

Picture

Music

Movie

Music and PIC

F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG

To make the picture overturn

Each press of NEXT button to make overturn 90 with right,

press button to resume the program.

SETUP

File copy

Card

USB

Remove Card

Remove USB

AAA Multimedia Player

AAA Multimedia Player

AAA Multimedia Player

Stream media broadcast system

Note:

the play file menu are
different with your USB
devices.

Press ENTER button to play this devices

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

1. Press button to select

Music" option.

2. Press button to enter

play menu.

3. Press button to select

desired music, and then press
button to play music.

Note: the play file menu are
different with your USB.

4. When playing music,

press button to select
play mode, (play mode:
standard, program, Random;
Repeat mode: Disc Repeat,
Folder Repeat, File Repeat)
and press button to
ensure the mode.

5. When playing music, press

button to set the speed
of play.(quick or slow)

6. Press button to swap

the next and previous music.

Note: 1. DISC Repeat mode: press button,
the DISC Repeat will appear on the screen, and then
press to ensure it.

2. Program mode:
press button to select the
music in left list, and press
button to program in turn,
and then the DISC Repeat will
appear on the screen, and then
press button to select "Done",
and then press button to
ensure it.

"

To enjoy music

The day went away .MP3

Play mode standard

The day you went away.MP3

01 07 / 04 20

Picture

Music

Movie

Music and PIC

AAA Multimedia Player

AAA Multimedia Player

Stream media broadcast system

The day went .MP3

Soft .MP3

Done

The day went .MP3

Soft .MP3

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

1. Press button to select

"Movie" option.

2. Press button to enter play

menu.

3. Press again button to

select desired music, and
press again button to play
it.

4. On display, press button
to select in turn:

File-Play Back Control-Auto
channel-Play Mode

5. Press button to set
speed, press button to
resume to standard mode.

6. Press button to select
the next movie or previous.

7. Press EXIT button repeatedly
to return.

To play Movie

E08-8SOBTILES-1

Picture

Music

Movie

Music and PIC

AAA Multimedia Player

AAA Multimedia Player

Stream media broadcast system

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

1. Press button to select

"Music and PIC" option, and
press button to enter menu.

2. Press to select

desired file, and press
button to ensure it.
( to cancel). Repeat step
2 to select more file, and
press button to enter
play menu.

3. On display menu, press

button to select the
speed to play.( Normal,
slow, fast).

4. Press button to swap

the next and previous picture,
press button to select
the music.

Note: press button to
stop playing the picture.

5. Press repeatedly EXIT

button to return.

To select the Music and PIC item

F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG

MP3

The day you went away .MP3

JPEG

0016.JPG

Play

Play mode standard

IMAGE

00 01:43

Picture

Music

Movie

Music and PIC

AAA Multimedia Player

AAA Multimedia Player

Stream media broadcast system

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

1. Press button to select

"File Copy" item.

2. Press button to enter

the copy menu.

3. Press button to enter

the file menu, and press
button to select "Card" or
"USB"

4. Press button to enter

Card or USB, and select the
files to copy, then press EXIT
button to call up COPY and
PASTE, and then press
button to select COPY, and
press button to confirm,
press again button to
select PASTE, then press
button to paste, in this
time, the "File already exits,
overwrite it "will appears
on the screen, and press
button to select YES/NO,
and then press button to
confirm.

5. Press button to cancel.

Copy file function

Card

Select source Port:

USB

F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG

Root

F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG

Root

COPY

PASTE

SETUP

File copy

Card
USB

Press ENTER key to enter COPY menu

AAA Multimedia Player

Stream media broadcast system

Note:

button to select
the all files;
button to cancel.

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

To select language

1. Repeat steps 1-2, and

then press button to
select version.

2. Press button to display

the version number.

To display the version

Language

Version

D0606050915M

1. Press button to select

"SETUP " item.

2. Press button to enter

the SETUP menu,

3.and press again button

to enter language option.

4. Press button to select

desired language, and press
to ensure it.

5. Press EXIT button to return.

SETUP

File copy

Card
USB

Press ENTER button to SETUP menu

AAA Multimedia Player

AAA Multimedia Player

AAA Multimedia Player

Stream media broadcast system

STILL

SLEEP PIP

TV/AV

P.STD S.STD

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

ABC@

DEF

JKL%

GHI$ MNO

STUVPOR& WXYZ

*#()

MUTE

DISPLAY

CH+

CH-

VOL-

VOL+

MENU

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.

Maintenance

Cleaning the Screen

- Early malfunctions can be prevented. Careful and regular cleaning can
extend the amount of time you will have your new TV. Be sure to turn the power
off and unplug the power cord before you begin any cleaning.

1. Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a

mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring
the cloth until it`s almost dry, and then use it to wipe the screen.

2. Make sure the excess water is off the screen, and then let it air-dry before you turn on

your TV.

Cleaning the Cabinet

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good
idea to unplug the power cord to protect against possible damage from lightning or
power surges.

Specifications and functions

P42A9-AK

Screen

Type

Viewing angle

Diagonal

Color system

Sound system

Video input

TV/VIDEO

DTV YCbCr

YPbPr

PLASMA DISPLAY PANEL

>170 (H)/170 (V)

PAL, SECAM, NTSC-M

D/K I B/G M

SCART (CVBS, Y/C, RGB), YCbCr

480i/p, 576i/p, 720p, 1080i

~ 150-240V 50/60Hz

Working temperature: 5 ~35
Working humidity: 20%-80%
Store temperature: -15 ~45
Store humidity: 5%~90%

3W

42

2x7W

Sound UPO

Power

Standby consumption

Condition

Max.320W

Power consumption

Dimensions (WxHxD)

mm

(With stand

1275mmX152mmX740mm Speaker included

Troubleshooting

For the sake of time and cost, it is strongly recommended that you check out
the problem by yourself according to the instructions listed hereunder before
contacting the after-sales service for technical assistance.

Note: Production of the plasma screen requires high and precision technologies. However,

there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or
spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air
pressure is below 750hpa, the picture on the plasma screen may be affected and a muffled sound might
be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is
resulted from difference between air pressures inside and outside the display. This is not a defect covered by
the limited warranty.

NOTE: Design and specifications are subject to change without notice.

The dimension in this manual is a approximation.

Note: Do not leave the television with static picture in an extended period as it may result in
residual image on your television screen.

Horizontal/vertical bars
or picture shaking

Check for local interference such as an electrical
appliance or power tool.

No picture, no sound

Verify if the television is properly plugged.
Verify if the television is properly supplied power.
Verify if electricity is available.

Blank screen

Verify if correct signals are input.
Press TV/AV button to change signal input to TV input.
Restart the television of power supply is interrupted.

No sound

Press Mute button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
Press VOL+ button to see if the problem can be solved.

Poor sound

Verify if sound system is correct. Refer to some chapter
for adjust.

No picture in some
channel

Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by Fine Tune and Manual Search.

No color for some
channel program
(black and white)

Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.

Spots with some or
all pictures

Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.

Television out of control

Disconnect the television from power supply and, 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.

0090506976 03