Haier N60 User Manual

USERS’ GUIDE

Thanks for purchasing Haier mobile phones, which are a combination of the essence of
high technologies, stylish designs and a plenty of functions. They are expected to bring
endless funs to your life.

Before the use of Haier mobile phones, please read this users' guide and keep it
carefully for further reference.
This guide serves as an operation guide instead of a quality guarantee. Haier Group
Company of Qingdao reserves all the rights to interpret typing errors in this guide,
inconsistency with the latest materials and upgrading of soft wares and make changes at any
time. Such changes will directly be edited into the new edition of users' guide without further
notice. This users' guide is edited and printed by Haier Group Company of Qingdao.

All rights reserved!

To be held responsible for reprint!

IMPORTANT SAFETY PRECAUTION

When using this product please follow the
safety precautions below to avoid possible
legal issues and damage.

SAFETY IN AN AIRCRAFT
Your cell phone can cause
interference in an aircraft's

navigation system and its
network. In most countries, using this
product on board an airplane is against the
law.

SAFETY IN VOLATILE

ENVIRONMENTS

Do not use you cell phone in

gas stations. It is also
prohibited to use a cell phone in fuel
storehouses, chemical plants and locations
containing explosives.

SAFETY ON THE ROAD

Drivers are not permitted to
use handheld telephone
devices while the vehicle is in

motion except in case of an emergency. In

some areas using hands-free devices as an
alternative is allowed.

RADIATION SAFETY
The cell phone should be
operated under the suggested
conditions only to ensure
radioactive performance to

prevent harmful interference.

SAFETY NEAR MEDICAL
EQUIPMENT
The cell phone may cause

medical equipment
malfunction. In most hospitals and medical
centers use of cell phones is prohibited.

Attention

There are no user serviceable
parts inside this product. If this
product appears to be broken,
call qualified service personnel

and send this product to the
appointed mainantenance service
center.
Do not attempt to disassemble or
repair this product as it may result
in electric shock or unrecoverable
damage to the product itself.

Keep this product out of reach of
small children.
Store this product in its protective
case in a cool dry place.

Dispose of used batteries; please
connect your local waste disposal
centers. Do not throw the battery
near fire source in order to avoid
explode.

Fast guides for N60 Mobile phone

* Enter main menu

1. In idle mode press left soft key to access
main menu.

2. In the main menu, press up/ down/ left/ right
of navigation key to select menu list.

3. In the main menu, press left soft key to
access the selected menu.

4. In the main menu, press the right soft key to
switch display mode of menus.

5. Press OK to access the selected menu in the
main menu.

6. In the main menu, press HOME key to return
to the idle screen.

7. Press and hold power/ hang up key to turn off
the phone.
* Left and right soft key perform each function
indicated by labels at the bottom corners show
the current soft key functions.
* In the idle mode, double-pre ss this screen can
access to shortcut option screen. In there
including: Edit SMS, Dictionary, Email, NotePad,
Video play list, Call Forward, Recorder, Photo

List and User-disk.
* Basic Operations
Turn on/ off: long press power/ hang up key
Dial call: input phone number and then dial
End a call: press power/ hang up key
Answer a call: press calling key/ left softkey
Adjust volume: press MODE/MENU key of the

phone left side

Return to main menu/ idle screen: press HOME

key
Show/conceal audio player: press MP3 key
Erase/erase all/ return to the previous: Press
CLR
Speed dial/select option function of list: you can
press and hold any of the keys from 1 to 9 to
quickly make a phone call from the menu list.
Notice: in DC mode, press CLR key doesn’t exit

this mode.
* Direction for use the rotary screen
When your phone’s flip is open, the flip revolved
90° along the clockwise or revolves 90° or 180°
along the counter clockwise, when revolve to
the180° position, then close the flip, the phone

enter PDA operation mode.
* Directions for use touch-pen
The touch-pen of mobile phone can help you
operate the mobile phone better.
The touch-pen is a perfume p en, before use it
inject the selected perfume in the special cylinder
of the touch-pen.
Notice: please control the speed and
quantity during injecting.
* Correct using the MMC/SC card
Use the MMC/SD card and thick battery in
this phone. The phone indicates the loading
is successfully established, and the SD icon
on top right corner of the screen turns yellow.
If you want to take off the MMC/SD card,
first of all, you must click the SD icon to
uninstall it and then to take off this card.
Notice: to take off /on the MMC/ SD card
unlawfully or take off the card in service may
be cause irremediable defect. Please use it
correctly acceding to the operation method.
(If the card is damaged irremediably
because of take off/on card unlawfully, there

is not service of guarantee of repair.
The correct method of installs or take out
battery
Installing the battery
Turn the phone upside down and then hold
the phone by the left hand. Aim the
protruding part at the bottom of the battery
at the groove of phone, and then press the
top part of the battery lightly until you hear a
click. (As shown FIG 1)
Taking out the battery
Turn the phone upside down and then hold
the phone by the left hand. Push up the latch
at the top of the battery by thumb of right
hand to uplift the battery and separate with
the main machine, and then take out the
battery. (As shown Fig 2)

Groove

Protruding part

Latch

B

attery

Notice: If according to this step operation
cannot cause the contact of phone to
destroy and is unable to use. To install and
take out the battery , please accord to correct
method above.

Ⅰ introduction to your phone

1.1 Keypad
Power/hang up key
The red key on top right corner of the
keypad is power key. Press and hold the key
can switch on/off the mobile phone.
Pressing the key can end a call during a call
or reject to answer a call. Pressing the key in
the profile menu can save set return to the
idle mode.
Call key
The green key on top left corner of the
keypad is call key. You can dial or answer a
call with the key.
Press the key in idle mode can enter
‘outgoing call list’ option.
Up/down/left/right key
The navigation keys can control the cursor
directions.

In idle mode:
Press up key: enter ‘call list’ menu directly.
Press down key: enter phonebook menu

directly.
Press left key: enter ‘Haier world, Monternet
and Haier’ option screen directly.
Press right key: enter ‘SMS’ menu directly.
OK key
With this key you can select or enter the
option at flashing cursor location.
In idle mode: press this key to access main
menu screen.
Left soft key
Press this key to access main menu screen.
Right soft key
Press the key in idle mode to enter profile
mode directly.
HONE key
In main display, press the key to return to
idle mode; during running press the key
continuously to return to the main display.

MP3 key
Press this key to show or conceal audio player
directly.

Left soft key Right soft key
MP3

Up key

Right key

HOME key Down key

OK/ Middle key Power/

Hang up

Left key CLR key

Call key Keypad

Touch-pen
Camera key

Right side key 2

Right side key 3

MODE key
MENU key

CLR key
Press the key to erase/ erases all text in edit
mode; press the key to return to previous
menu in no-edit mode.
Number key 0-9
You can press briefly the number keys 0-9
to enter the phone number option menu and
show correspond number; press and hold
number 1 to access the ‘voice box’ and
press and hold number 2,4,5,7,8 to access
speed dial or 1-touch dial key (need setting),
press and hold 0 to enter ‘phone set’ option,
and hold press 3,6,9 to asked you whether
active the ‘Call Forward’ feature respectively.
In the option list press and hold the number
keys 1-9 to select corresponding option feature.

Key
Press briefly the Key in idle mode to
enter the phone number option menu and
show * in the input box; press and hold the
key can enter the phone number option
menu and show +/W. (The first show +, and
then show W)

In the edit box press the key to conversion
among input modes.
# Key
In idle mode, you can input number first, and
then press briefly the key input ‘#’, press and
hold this key to activity ‘meeting mode’
feature. Input number first during dialing,
and then press and hold # key to input ‘P’.
In the edit box press this key to access
corresponding punctuation symbol.

MODE key
This key on the left side of the phone body
press the key can increase volume.
In the ‘camera’ or ‘video’ mode, press this
key to switch among camera/ picture/ video/
movie.

MENU key
This key on the left side of the phone body,
press the key can decrease volume.
In the ‘camera’ or ‘video’ mode, press the
key to select desired option.

Camera key
This key on the right side of the phone body,
press and hold the key in idle mode to
activity camera/ video feature.
In the ‘camera’ or ‘video’ mode press the key
to shoot picture.
Right side key 2
On the right side of the body is side key 2, in
camera mode, when you browse display
press the to zoom in focus; in camera and
video mode, right shift the cursor. When you
brown the picture screen press the key to
switch to the next picture; in movies brown
screen press the key to switch to the next
movies screen.
Right side key 3
Right side key 3 on the right side of phone
can zoon out focus in camera mode, in the
camera and video display screen, press the
key to move left the cursor; in the picture
view display, press the key to switch to
previous video.

1.2 Idle and main displays

1. In idle screen, press left soft key (or use the
touch-pen to click the ‘menu’ in the
indication area) to access the main display,;
press the right soft key in idle screen ( or
use the touch-pen to click the ‘profile icon’ in
the soft key indication area) to enter the
profile mode.

2. Main display: the five icons in last right
side of the main display screen indicates
five classes as follow: setting class,
communication platform, multimedia class,
tool class and fun class.

3. The quick feature columns icon on the
top of the screen indicator as follow
from left to right: network signal, dial call,
SMS, MMS, call list MP3, memory,
HOME button as well as battery power
level.

4. In any display, may use the touch-pen
to click the quick feature icon or
indication massage box or menu. (See
the clicked icon whether is availability or
not.)

5. MMC/SD card: click the SD icon in
quick feature columns to enter MMC/SD
card option screen to view/ uninstall it.

1.3 Using the power

Warning: You must put the phone at the
draught of temperature +5℃-+40℃ when
charging, and must use the Haier batteries
and charger provide by the provider. It will
arise danger when you use unconfirmed
charger and it will violate certification and
guarantee items.

1) Using the battery

Phone’s stand-by time and calling time
provide by the provider, it is base on the
good operational environment. In practical
application, the battery’ working time has
change along with the different of the
network condition, work environment and
using method.

2) Charge Indicator

In main display, the battery power level
showed on top right corner, though this icon
to know the surplus.

3) Charging the battery
Attach the charger to the phone
Plug the joint of the charger into the
accessory port of the phone.
The battery level indicating bars start
varying, indicating that the battery is being
charged. The display lamp of charging
changes red.
When the lamp of charging changes green,
the battery icon is full when the battery is
fully charged.
Remove the charger; Plug the transformer
unit into an easily accessible AC power
socket.
You can use the USB to charge, insert the
USB prompt ‘whether use the USB’ select
‘no-use’ to charge, if you select ‘using’ it will
indicate the USB used by way of memory.
Notice: 1. Press and hold the buttons of both
sides of the charger after the charging to
plug out the charger.

2. We suggest you to charge the battery fully
when you use the phone for the first time.

3. Do not pull out the plug of the charger

during the charging to avoid harming of the
phone and charger.

4. You must put the phone at the draught of

temperature +5℃-+40℃ when charging,
and must use the charger offered by the
provider. It will arise danger when you use
unconfirmed charger and it will violate
certification and guarantee items.

5. Vibrate feature will is invalidate.

4. Installing and taking out the battery

Installing the battery
Turn the phone upside down and then hold
the phone by the left hand. Aim the
protruding part at the bottom of the battery
at the groove of phone, and then press the
top part of the battery lightly until you hear a
click. (As shown FIG 1)
Taking out the battery
Turn the phone upside down and then hold
the phone by the left hand. Push up the latch
at the top of the battery by thumb of right
hand to uplift the battery and separate with

the main machine, and then take out the
battery. (As shown Fig 2)

Latch

Battery

Groove Protruding part

1.4 Connecting network

1). SIM card
Your provider provides Subscriber Identity
Module (SIM) card for your phone, contains
your phone number, service details, and
phonebook/message information. Make
sure that you have inserted a valid SIM card
before use the phone; otherwise, you cannot
use the feature in the SIM card.
Any related information with establishment
network connection recorded in card, and
record phone name, number and message
in the SIM card also. You can insert the SIM
card into any GSM phone to use (a new

phone can recognize automatically.
In order to prevent loss and damage
information of in the card, should avoid
touching the metal plane region, Avoid
exposing your SIM card to electricity,
magnetism. The card damaged once, the
user will not be able to enter the network.
Warning: Turn off the phone when you take
out the SIM card. Forbids absolutely to
insert or to take out the card while the phone
connected the external power.

2). Insert SIM card

Before remove or insert the SIM card please
take out it carefully. Turn off your phone and
then remove battery as well as other
external power. Slide the SIM card under
two lugs with the metal contacts facing
downward, push the SIM card so that it
clicks into place. If user wants to take out it,
please turn the phone off firstly then take out
phone’s battery and last take out SIM card.

3). Insert the SIM card

In order to prevent random use your phone,

you can use PIN (Personal Identification
Number) to protect your SIM card form
unauthorized use. Once the PIN is activated,
you will be required to enter the PIN code at
the time your phone is turned on. You can
disarm the protect code, if so, the SIM will
be not prevent random use.
Press and hold power/ hang up key to turn
on your phone and press the left soft key (or
use touch-pen to click the soft key) to
confirm. If you enter a wrong PIN code three
times, the SIM card will be locked, and need
input PUK code.
Pay special attention to: there is a stander
PIN cord (4 to 8 digits) of your SIM card is
pre-configured and communicated to you by
your network provider. You can personalize
the PIN code.

4) Network Connection
If a right code is entered your phone will
start searching for the Network Settings.

5) Switch on/ off
Press and hold power/hang up key to switch

on/off the phone. If the PIN is activated,
when you switch on the phone, you may be
prompted to enter the PIN code.
a. Input the PIN code
You can use PIN to protect your SIM card
form unauthorized use. Once the PIN is
activated, you will be required to enter the
PIN code at the time your phone is turned
on.
For the sake of confidentiality, the code is
displayed as a group of “*” in the screen.
Press the left soft key (or to click the soft key
with touch-pen) to confirm, after a short time,
if a right code is entered your phone will start
searching for the Network Settings. Once
the network name is shown on the screen,
you can dial or answer a call. If no network
name is shown on the screen, need you to
register again.
If you make a wrong input, you can press
CLR to delete the wrong numbers. If you
enter a wrong PIN code three times, the SIM
card will be locked and asked you input PUK

code. If so, please contacting your SIM card
supplier.

6) Dial call
When the sign of the Network provider is
displayed screen, your phone enter idle
display to dial and answer call.
In quick feature display from the left first icon
is signal intensity. All mobile phones may be
obstruction subject to interference, which
could affect the performance of the mobile
phone. So moving within small range can
advance the signal strength.
Make a call in idle mode have dual mode
such as: direct dialing, call from the
phonebook, call from call list, call form SMS
and MMS, speed dial, call from SIM card. (if
you have set PIN code must input right
secret code to dial a call)
In any country where the digital GSM
network is used, you can make emergency
calls when your mobile phone in the
coverage network area (you can get it by
means of inspecting the network signal

indicator on the left top corner of the screen.)
and you can make emergency calls without
SIM card.
112 is the standard GSM emergency
number, which can be used by any GSM
network in the world.

Ⅱ Call

2.1 Dial call

When your service provider’s icon display
the screen, to wit enter idle mode and you
can make or answer a call. The signal
indicator in the top left corners of the screen
Indicates strength of signal being received.
There are 4 bars is the most signal indicator.
All mobile phones may be obstruction
subject to interference, which could affect
the performance of the mobile phone. So
moving within small range can advance the
signal strength.
Make a call in idle mode have dual mode as
direct dialing and call from the phonebook.

2.1.1 Direct dialing

2.1.1.1Dialing domestic telephone

The best simple means is enter phone
number (make a domestic telephone, enter
area code) then press call key (or use
touch-up to click the call key button) to make
a call. The display screen appears ‘linking’
during dial a number, when calling there is

called time and caller’s phone number and
name will appear on this screen.
Pressing right key, power/hang up (or click
‘hang-up’ button by touch-pen) to end a call.
The screen will show how much time you
have spent on a last call.

2.1.1.2 Dial extensions of fixed telephone
Some extensions of fixed telephone cannot
be got through directly. So you need to get
through the leader and then the extension
number, if you insert ‘w’ ‘p’ between two
numbers while inputting them the handset
will finish dialing the leader and
automatically dialing the extension number.
The method of inputting ‘w’ ‘p’ is as follows:
input the call time and press # key (‘w’ will
be displayed on the screen at this moment).
Then press long #(‘p’ will be displayed on
the screen).
You can dial main and extension number
directly by input ‘w’. Feature of ‘w’ is
shortening processing of call. Once input
‘number’ + ’w’ (delay time) + ‘operating

number’+ ‘w’ (delay time)……, and then
press call key (or click ‘call key’ icon by
touch-pen) to dial. Method of input ‘w’ as
follow: press and hold * key while you input
(first show ‘+’ and then show ‘w’ in ‘the
number display screen’.
For example: extensions fixed phone can be
got through directly, input follow number to
dial: main phone number ‘P’ extension
phone number, then press call key (or click
the call key icon by touch-pen), this phone
will dial extensions automatically.

2.1.1.3 Dial IP call

The first, enter ‘phonebook’ option to set IP
number. Afterward, enter ‘call list’ option to
input toll number, then select ‘IP call’ option
in ‘menu’ of soft key indicator, insert IP
number automatically in front of phone
number and then dial it.
If you don’t set IP number in the phonebook,
so then your phone will indicates ‘no have IP
number’ when you input toll number to dial
IP number.

2.1.1.4 Make an international call
Make an international call
If you make an international call , you only
enter ‘+’ (double press* key until
“ ﹢ ”appears on the screen), then enter
country code and phone number.
For example, if you make a Gallo call, you
can double press * key (appears on ‘+’) 33
(France code) then input district code and
telephone number.

2.1.2 Dial from the phonebook
Press down navigation key in idle mode to
access ‘phonebook’ menu and then select
desired number to select ‘call’ menu in soft
key indicator, or after select this recorded to
dial it directly.
Or enter ‘call’ dialing screen to select
‘phonebook’ option in soft key indicator so
that enter phonebook. To select desired
number, when the number displayed in
number show column press call key (or click
call key icon with touch-pen) to dial this
number.

2.1.3 dial from call list

In idle mode press the call key to access
‘outgoing list’ of call list, and select a
recorded number to dial it directly by press
call key. Or select ‘call’ menu in soft key
indicator to dial this recorded number.
Press up navigation key to access ‘call list’
option and then select a recorded number to
dial it directly by press call key. Or select
‘call’ menu in the soft key indicator to dial it.
Or you can enter Call option screen or select
‘call list’ option of menu in the soft key
indicator to access the call list option. When
you select a recorded number to dial directly
by press call key. Or select ‘call’ option
menu in the soft key indicator to dial it.

2.1.4 dial from SMS

Press right navigation key in idle mode to
access SMS option, and then select a SMS
massage to dial sender’s number directly by
press call key or select ‘call’ option in soft
key indicator to dial sender.

2.1.5 dial from MMS

Enter ‘MMS’ option and select a downloaded
successfully MMS to dial sender number
directly or select call option in soft key
indicator to dial this sender.

2.1.6 Fast dial
Fast dial is also called contract number dial.
You can separately set the 5 digital keys
(2,4,5,7,8).
In the idle screen, long press the digital keys
(2,4,5,7,8) that have been set to be dialed
singlely, you will find the telephone number
is dialed automatically relevant to the setting.
If what you select is not set to be dialed
single, the mobile phone will remind you that
‘single key dial is not set’ and point out
whether you need to set single is started,
you need to first input the password and
then to set the single key dial.

2.1.7 dial number in SIM card
In idle screen, press digital keys and * key,
then press call key (or click call key icon by
touch-pen) to dial number in SIM card, that
is to say, the number stored in

corresponding station of SIM card will
display automatically.

2.2 Access failure

When the phone cannot put through, for
instance, the opposite party ‘line is busy, he
refuse to answer the phone, he is not in the
service district or the phone is switch off’,
the phone will remind you that ‘the phone
cannot put through’. At this very moment, if
you have set redial automatically, the mobile
phone will automatically redial the telephone
you dialed just now until it doesn’t get
through after dialing for ten times or you
initiatively cancel the dial.

2.3 Answer the Call

2.3.1 Answer a Call

When a new call comes, the mobile phone
will show the sign of the new call and the
telephone number or the name, and also, it
will inform you of the new call according to
your setting----vibration/ring/vibration plus
ring/ mute (If your phone no have shown
incoming call feature, when a new call

comes, the display screen don’t shown
caller’s information, only show incoming
flash).
When the mobile phone rings and it is
informed from the screen that there is a new
call, press call key, power/ hang up key (or
click the answer in soft key indicator with
touch-pen) to answer the phone.
When the talk ends, press right, power/
hang up key (or click the refuce in soft key
indicator with touch-pen) to hang up.
If you are answering the phone, your mobile
phone will inform you of the new call with
short “du du”. At this moment, you can press
call key, left soft key (or click the answer in
soft key indicator with touch-pen) to answer
the new call, while the formerly answered
telephone will get into the keep-talking state.
The formerly answered call will been hang
up.
If you are answering the two phones, your
mobile phone will inform you of the new call
with short “du du”. You can press call key,

left soft key (or click the answer in soft key
indicator with touch-pen) to answer the new
call, the formerly answered call will been
hang up. The formerly answered telephone
will get into the keep-talking state.
If you want to refuse a call you can press
right soft key, power/hang up key (or click
‘refuse’ or ‘busy’ icon by touch-pen) to
refuse new call.

2.3.2 Answer call with freehand

When a new call comes, the mobile phone
will show the sign of the new call and the
telephone number or the name, and also, it
will inform you of the new call according to
your setting----vibration/ring/vibration plus
ring/ mute (If your phone no have shown
incoming call feature, when a new call
comes, the display screen don’t shown
caller’s information, only show incoming
flash). When a new call comes, the mobile
phone will show the sign of the new call,
click the signal with touch-pen to answer it,
namely, your phone was in freehand mode,

opposite sound come out from reproducer
but no incoming from headphones.

2.3.3 Answer incoming with earphone
When a new call comes, the mobile phone
will show the sign of the new call and the
telephone number or the name, and also, it
will inform you of the new call according to
your setting----vibration/ring/vibration plus
ring/ mute. If you connect the earphone with
the phone, answer and hang up the
incoming call with press the button of
earphone. Press the button of earphone
again to end the call.

2.3.4 Close the show incoming feature
When a new call comes, the mobile phone
will show the sign of the new call and the
telephone number or the name, and also, it
will inform you of the new call according to
your setting----vibration/ring/vibration plus
ring/ mute.

2.3.5 Cancel incoming
When a new call comes, the mobile phone
will show the sign of the new call and the

telephone number or the name, it will talk
you according to vibration/ ring/ vibration
plus ring/ mute by your set.
When a new call is coming, press right soft
key or power/hang up key (or click cancel or
busy button by touch-pen) refuse the new
incoming call.
According to your set or the service provided
by the network, the call maybe alters to
other number or in busy state.

2.4 In the process of calling

In the process of talking, the following
functions can be fulfilled: dial extensions,
adjust the volume, preserve the talk, turn
on/off the hand free, call list, messages,
silencing and new calls.

2.4.1 Dialing Extensions

After hearing the notice sound of the
opposite telephone, dial the extension
number directly which will be displayed on
the screen; while finish dialing the extension,
press right soft key (or click return in soft key
area by the touch-pen) to display the

leader’s number.

2.4.2 Adjust Volume
You can press MODE, MENU key to
increase or decreased the volume of the
phone while talking.

2.4.3 Option
The functions can be activated by pressing
option. There are five contents in the menu:
preserve the talk, turn on/off the hand free,
telephone list, message, mute and new
calls.
Preserve the talk Preserve the present talk
(relating to SIM card), thus, neither of the
sides will hear the voice of each other.
Change preserves the talk into regain the

talk, you can return to the normal talking.
Hand-free The sound of both sides will be
sent to each other by loudhailer, in the
meanwhile the Hand free alters to Cancel
the hand free, then by this item you can
return to the normal talk(when the mobile
phone is connected to the other fittings,
such as earphone, the loudhailer maybe

stop working);
Silent Turn off the voice temporarily in

talking then you can hear the opposite party
while he cannot hear you. Thus, it is
convenient for you to talk with others in your
side while talking on the phone. Change the
item into cancel mute, then you can return to
the normal talking
Call list Enter the call list, then you can
search the phone number while talking, the
talking direction and the talking state.
New call Dial the second call (relating to SIM
card).

2.4.4 Hang Up

Press right soft key, power/ hang up (or to
press the hang up in the function area to
hang off the phone by the touch pen). After
the phone is hung off, the call time will be
displayed.

2.4.5 New Messages

The mobile phone will inform you of the new
message (SMS or MMS) with notice sound
when you are talking on the phone.

2.4.6 Answer the New Call
When answering a new call, the former talk
will be in the preserved state. You can
choose the Holding to activate the former
talk while the new call will get into the
preserved state (relating to SIM card).

2.4.7 Dial the Second Call
You can dial the second call in the process
of dialing the first. The concrete method is to
select new call to show the new window for
dialing, or press the digital key directly. You
can also press the call key to dial the new
call (click the call by touch pen).
When getting through the line, the number in
process of talking will be displayed in the
bottom line. You can press Up/Down (or
click it by the touch pen) to switch the talk.

2.4.8 Answer two calls simultaneously
When getting through the two lines, the
number in process of talking will be
displayed in the bottom line, while the other
will get into the preserved state. You can
press Up/Down to switch the two talks.

When getting through the second telephone,
you can choose the following functions:
holding, conference call (relating to SIM
card), hand free, mute, telephone list.
Holding Keep the present call(relating to
SIM card), then the both sides can not hear
the voice of each other, then the holding
alters to cancel holding, press it then you
can keep the normal talking.

Conference call A call conference of
many people can be hole, and a separate
talk with the very attendee pointed can be
run. The concrete number of the attendees
will be supplied by network.

Hand-free The sound of both sides will
be sent to each other by loudhailer, in the
meanwhile the Hand free alters to Cancel
the hand free, then by this item you can
return to the normal talk(when the mobile
phone is connected to the other fittings,
such as earphone, the loudhailer maybe
stop working);

Mute Turn off the voice in talking temporarily,

and you can hear the opposite party while
he cannot hear you. Thus, it is convenient
for you to talk with others in your side while
talking on the phone. Change the item into
cancel mute, then you can return to the
normal talking.

Telephone list You can get into the
telephone list to search the telephone
numbers, the talking direction and the
talking state in the process of dialing .

2.4.9 Conference call A call conference of
many people can be hole, and a separate
talk with the very attendee pointed can be
run. The concrete number of the attendees
will be supplied by network.
You can hang off all the calls and the call
time will be displayed by press the right soft
key/hang off /(or click the hang off by the
touch pen). If there are missed calls in the
process of talking, it will be informed on the
screen, If new call or new messages (SMS
or MMS) are coming, they will be informed

by the notice sound.
The following operations can be
accomplished by option in the process of
conference call; holding, seperarated, hand
free, mute, telephone list, redialing.
Holding Keep the present call (relating to
SIM card), then the both sides can not hear
the voice of each other, then the holding
alters to cancel holding, press it then you
can keep the normal talking.
Separated when the opposite partner is
selected, press the Separated, and then you
can talk with the partner separately, in the
meanwhile, two calls are through. If you
want to back to the conference call, press
conference.

Hand-free The sound of both sides will be
sent to each other by loudhailer, in the
meanwhile the Hand free alters to Cancel
the hand free, then by this item you can
return to the normal talk (when the mobile
phone is connected to the other fittings,
such as earphone, the loudhailer maybe

stop working);
Mute Turn off the voice in talking temporarily

and so you can hear the opposite party
while he cannot hear you. Thus, it is
convenient for you to talk with others in your
side while talking on the phone. Change the
item into cancel mute, then you can return to
the normal talking process
Telephone list, you can get into the
telephone list to search the telephone
numbers, the calling direction and the calling
state in the process of dialing.
Redial Dial the second number (relating to
SIM card)
Notice; All the imitational equipment are
invalid in the process of talking, and the
sound volume will decrease 50%.

2.4.10Search the telephone list in the
process of talking

If you want to be back, press Home.
Press the direction sign, you will enter the
telephone list.

2.5 change the incoming tone
Press right soft key in the await screen (or
click the sign mode by touch pen) to change
the way of incoming tone.

2.6 Emergency Call
In any country where the digital GSM
network is used, you can make emergency
calls when your mobile phone is placed in
the network coverage area (you can get it by
means of inspecting the network signal
intensity bar on the left top corner of the
screen.) and you can make emergency calls
without SIM card.
112 is the standard GSM emergency
number, which can be used by any GSM
network in the world.

2.7 hiding the call
When the customers use the phone to
receive or dial calls, they can press the
HOME key to hide the phone number. It is
convenient for the customers to get other
operations. (Some applications colliding with

the phone cannot be used, such as, while
having a call, the customers cannot use the
music player to play the music. And the
phone will inform you)

2.8 checking the IMIE number of the phone
Enter the application of the mobile phone,
you can input the number”* #06*”and the
calling key (or use the touching key to press
the calling key) to get the IMEI number.

2.9 The phone recording
You can touch the key of recording on the
top right in the calling, receiving call and call
duration windows to have phone record. But
the recording can only be done in the
process under calling. The recording files
will be stored in the recording files of the
customer’s resource automatically.
Attention: after opening the function of
recording, the alteration of hand-free
canceling the hand-free cannot be fufilled.

Ⅲ Operation of menu

1. Setting menu option

1.1 Phone setting

1.1.1 Language setting
There are ‘Chinese simple’ and ‘English’
options in language set menu, press OK key
(or click option with touch-pen) to select you
desired language, and then press left soft
(or click ‘save’ in the soft key indicator by the
touch-up) to store, the language will be
changed into the desired language.

1.1.2 Backlight
This function allows you to set the length of
time the backlights in your mobile phone, set
respectively ‘5s, 10s, 15s, 30sand 60s. You
can select according to the need. Press left
soft key (or click save option in soft key
indicator by the touch-pen) to save your set.
When the mobile phone stops working, and
the selected time coming, the backlight will
turn off automatically.

1.1.3 Brightness
Adjust phone’s brightness in 01-09 ranges,

the selected number more large and the
bright more light. Press left soft key (or click
‘save’ of in the soft key indicator by
touch-pen) to save your set.

1.1.4 Greetings
After activate ‘greetings’ option you can
input desired greetings, then press left soft
key (or click ‘save’ icon in indicator by the
touch-pen) to save the greetings. Once
switch on your phone the greetings will be
shown in the screen. If you don’t activate
feature, the greetings won’t be shown when
the power is on.

1.1.5 Auto power on
You can select auto power on option and
input the power on time, then press left soft
(or click save icon in the soft key column by
the touch-pen) to save your set. When your
phone is in turn off state until set time arrive
your phone will automatically power on.

1.1.6 Auto power off
You can select auto power off option and
input the power off time, then press left soft

(or click save icon in the soft key column by
the touch-pen) to save your setting. When
your phone is in power on state until the set
time arrive your phone will automatically
power off.

1.1.7 Input set
There are Pinying, English, 123digits and
stroke input methods in the ‘input set’ menu,
and you can accord your need to select.
Press left soft (or click save icon in the soft
key column by the touch-pen) to save your
setting.

1.1.8 Hotkey
According your need to set each digit as well
as set single dial and quick dial. In idle mode
press and hold digit key will dial phone
number directly or show your setting
information.

1.19 Touch setting
When touch errors appear, you can enter
the touch setting to correct them. Click the

center of

correctly, then the window will

be back to setting screen, otherwise, you will
be instructed as followed: “too much errors,
try again!”

1.1.10 Reset
When you select this option, you will be
instructed: “Reset?’ When you select
‘confirm’ press OK key (or click ‘OK’ by
touch-pen) the screen instructed ‘Reset
successfully’. Your phone will reset: the
phone set, screen set, sound set, profile set,
as well as SMS firewall and phone firewall
option of in the security menu, reset them to
default.

1.2 Sound set

1.2.1 Call ring type

1. Ring volume
Press left/right of navigation key to adjust
ring volume, as well as press left key to
decrease volume and press right key to
increase volume.

2. Ring
Selected the Ring option and press left soft
key (or click save icon in soft key indicator

by touch-pen) to save it. There is ring tone
notifying you when a call coming.

3. Vibrate
Selected the vibrate option and press left
soft key (or click save icon in soft key
indicator by touch-pen) to save it. When a
call is coming, the mobile phone will vibrate.
Otherwise, the phone will be mute.

4. Glint
Selected the glint option and press left soft
key (or click save icon in soft key indicator
by touch-pen) to save it. There are three
lights, red, blue and purple. which will notify
you when a call is coming.

5. Music select
In music select menu press OK key (or click
with touch-pen) to enter ring list option menu,
you can select incoming ring type, as well as
select downloaded ring from ‘ring world’
website.

1.2.2 SMS ring
The SMS ring set is same to the incoming
ring. But there is difference from: this option

hasn’t glint feature.

1.2.3 MMS ring
The MMS ring set same as the incoming
ring. But there is difference from: this option
hasn’t glint feature.

1.2.4 Alarm
The alarm ring set same as the incoming
ring. But there is difference from: this option
hasn’t glint feature.

1.2.5 Power on ring, Power off ring,
Calendar, Key tone, Connected, Low battery
and Touch pad tone.
When select one option of them and press
left key (or click save icon in soft key area
with touch-pen) to save it. Those
corresponding option can ring; otherwise,
then do not have ring sound.

1.3 Screen set

1.3.1 Screen theme
Select the ‘screen theme’ option to press OK
key (or click with touch-up), your phone can
bounce out a list for select screen colors,
you can selecting fond color ‘Blue Sea’,

‘Gold Times’, ‘Coffer Aroma’ and ‘Cyan
Fruitage’ and so on.

1.3.2 Wallpaper Select
Select the Wallpaper select option to press
OK key (or click with touch-up) to enter
‘picture list’, and press up /down of
navigation key (or with the touch-pen to roll
up/down the strip) to select picture fond,
when you selected the desired picture, there
are indicator ‘wallpaper setting?’ be showed
you; if you press OK key (or click OK with
touch-pen) to confirm, the wallpaper will
switch to the selected picture; if you press
right key move the cursor to ‘cancel’ option,
and then press OK key (or click ‘cancel’
button with touch-pen), the wallpaper is no
change.

1.3.3 Idle screen setting
In idle type options including four types:
digital, analog, monthly view and world time.
You can press up/down key (or click ‘option’
with touch-pen) to select, and press left soft
key (or click ‘save’ with touch-pen) to save

selected, the selected type will showed in
the idle screen. If you select any one of the
wallpaper, scroll bar, week, the gregoria,
time and Chinese cale options, the selected
option will be shown according, otherwise,
will be not shown.

1.4 Call set

1.4.1 Call wait
Using the call wait feature, during calling the
incoming’s showed in the screen.

1.4.1.1 Activate call wait
Press left soft key (click the ‘activate call
wait’ option with touch-pen) to select
‘activate call wait’, and the screen show
‘connecting’ and then the screen will show ‘if
operating successful’.

1.4.1.2 Cancel call wait
Press left soft key (click the ‘cancel call wait’
option with touch-pen), to select ‘cancel call
wait’, and the screen show ‘connecting’ and
then the screen will show ‘if operating
successful’.

1.4.1.3 Inquire status

Press left soft key (click the ‘inquire status’
option with touch-pen) to select ‘inquire
status’, and the screen show ‘connecting’
and then the screen will show ‘if operating
successful’.

1.4.2 Call forward
When activate the ‘call forward’ option you
can select different type of call forward as
well as you can set the forward number.

1.4.2.1 Unconditional
After you activate this option, you can
forward all incoming call to other phone
number.

1.4.2.1.1 Activate call
Press left soft key (or click this option with
touch-pen) to select this option you can
enter the screen of input box, and after input
the desired number press left soft key (or
click with touch-pen) to confirm it and the
screen show ‘connecting’ and then the
screen will show ‘if operating successful’.
If you wand to change the forward number,
only need you activate the call forward

feature to input the new number in input box.

1.4.2.1.2 Inactivate call
Press left soft key (or click this option with
touch-pen) select this option, and the screen
show ‘in connecting’ and then the screen will
show ‘if operating successful’.

1.4.2.1.3 Inquire status
Same as inquire call wait status, press left
soft key (or click this option with touch-pen)
to select this option, and the screen will
show ‘connecting’ and then the screen will
show ‘if operating successful’.

1.4.2.2 When no reply
Basic operating of this option same as the
‘unconditional’, please reference
unconditional option. When you activate this
feature, you must select delay times.

1.4.2.3 When busy
All feature of this option same as the
unconditional feature.

1.4.2.4 When failing to connect
All the operations here are the same to those of
Unconditional.