Haier LY22R1WW User Manual
USER'S MANUAL
HD Ready Digital LCD TV and
HD Ready Digital LCD TV/DVD Combi
Please read this manual carefully before
using your television and keep this manual
for future reference.
MODEL:
L15T11W-A,L15TA11W, L15T11W-C,
L15TC11W, L19T11W-A, L19TA11W,
L19T11W-C, L19TC11W, L22T11W-A,
L22TA11W, L22T11W-C, L22TC11W,
L15T12W-A,L15TA12W, L15T12W-C,
L15TC12W, L19T12W-A, L19TA12W,
L19T12W-C, L19TC12W, L22T12W-A,
L22TA12W, L22T12W-C, L22TC12W,
LT15T1W, LT19T1W, LT22T1W,
LT15T1BW, LT19T1BW, LT22T1BW,
LT15T1WW, LT19T1WW, LT22T1WW
CONTENT
Safety Notice .........................................................................................
Front Panel Control................................................................................
Connection ...........................................................................................
Remote Control .....................................................................................
Remote Control ..................................................................................
Installing Batteries.............................................................................
Connection Instructions..........................................................................
Grounding...........................................................................................
External equipment connections...........................................................
Antenna Connection..........................................................................
VGA Input.........................................................................................
YPbPr Input......................................................................................
S-VIDEO Input..................................................................................
SCART Input.....................................................................................
HDMI Input.........................................................................................
Wall Mounting....................................................................................
Basic Operating Instructions....................................................................
Turn on the LCD-TV..............................................................................
Audio Control.......................................................................................
Mute...................................................................................................
Select the TV Channel ..........................................................................
Picture Mode.......................................................................................
Program Swap.....................................................................................
Program Scan......................................................................................
Menu Operations....................................................................................
Picture Menu Options............................................................................
Audio Menu Options..............................................................................
Function Menu Options..........................................................................
Adjust Menu Options.............................................................................
Tuning Menu Options............................................................................
DVB-T Main Menu Operations.................................................................
Installation.........................................................................................
Favourite Lists......................................................................................
Channel Edit........................................................................................
Timers.................................................................................................
Settings...............................................................................................
TELE TEXT............................................................................................
Basic Playback......................................................................................
Advanced Playback...............................................................................
Special Function Playback......................................................................
JPEG DISC PLAYBACK........................................................................
SCREEN SAVER FUNCTION................................................................
DVD System SETUP...............................................................................
General Setup Process.........................................................................
General Setup Page.............................................................................
Preferencel Page.................................................................................
Playable Discs.......................................................................................
Disc Protection and DVD Characteristics..................................................
Troubleshooting Guide...........................................................................
Specifications........................................................................................
1
2
3
4-5
6
6
7
7
7
7
8
8
9
10
10
10
11
11
11
11
12
12
12
12
13
13
14
16
18
19
21
21
22
23
24
26
28
30
31
32
32
32
33
33
33
35
37
38
39
40
Note: DVD is only available for certain models, please refer to actual products
Safety Notice
To prevent fire or electric shocks please read the instruction before
installing, using and cleaning the television.
Please read all the instructions before operation;
Please keep the ;
Do not use any accessories that are not recommended by the manufacturer:
Before operation, make sure the operating voltage of this unit is corresponds
with your house electrical supply;
Do not place the unit on unstable or in dusty and humid places;
Never put the unit in direct sunlight or near heat sources;
Allow enough space for proper ventilation;
Please keep water away from the LCD-TV . If water comes in to contact with
the LCD-TV, disconnect the power cord from the power source, then wipe the
set with a dry soft cloth;
Do not remove the back cover. If servicing is required , please refer to
customer helpline.
l
l
l
l
l
l
l
l
manual for future reference
l
Front Panel Controls
Control Panel Funct oni
1. Standby switch
2.SOURCE Select the input signals: PC/COMPONENT/DVD/HDMI/DTV
TV/SCART/S-VIDEO
3. MENU Press to select the main menu
4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item/Press to enter
5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
6. Power indicator
Illuminates red in standby mode, illuminates green when the display is
turned on
7.Remote Sensor
6
7
SOURCE MENU VOL- VOL+ CH- CH+ POWER
2 3 4 5 1
SOURCE MENU VOL- VOL+ CH- CH+ STANDBY
(The figure above and the description of the button may be different,
just see the actual set.)
15 inch
Other inch
6
7
12W
11W
T1
Connection Options
COMPONENT Input
Connect a component
video/audio
device to these jacks
VGA Input
Connect to the VGA
15PIN analog output
connector of the PC
display card for PC
display purpose
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
Antenna Input
Connect cable or
antenna signals to
the TV, either direcÂtly or through your
cable box.
Earphone port
VGA /COMPONENT/
S-VIDEO Audio Input
Connect the PC output
connector from a PC to
the audio input port
SCART
Connect to the DVD/
VCR/broadcasting
receiver or other
equipment
ANT IN
Y
Pr S-VIDEO
TV SCART VGA IN
AUDIO IN
Pb
HDMI
HDMI
Connect to HDMI
output of other
equipment
ANT
IN
Y
Pr
S-VIDEO
TV
SCAR
T
VGA
IN
AUDIOIN
Pb
HDMI
DVD
STOP
PLAY/PAUSE OPEN/CLOSE
PREV NEXT
DVD insert
(Please refer to actual product
of the DVD slot)
Remote Control Key Functions(for TV/DVD Combi)
When using the remote control, aim it
towards the remote sensor on the TV
Stand By
DVD Open/close
Picture Mode
Scan
Mute
Swap
Call Screen Display
Program Number
NICAM
Source Exchange
Digital Selector
DTV/DVD
Volume/Channel Selection
MENU
Zoom
DVD STOP
Tune Menu Button
DVD PAUSE/STEP
DVD/DVB-T MENU
DVD NEXT
Exit Screen Display
DVD PLAY/ENTER/DVB-T ok button
DVD /DVB-T Cursor Move button
DVD /DVB-T SUBTITLE
DVD ANGLE/ DVB-T favourite
DVD A-B REPEAT
DVD SLOW
DVD REPEAT
RED button
Green button
Yellow button
Blue button
DVD 10+
DVD Audio
DVD SETUP
DVD PROGRAM/ DVB-T EPG button
DVD SEARCH
DVD TITLE/PBC/DVB-T information button
DVD FAST REVERSE
DVD FAST FORWARD
DVD PREVIOUS
DVD CALL
TELETEXT BUTTONS
Buttons on the remote control
UP
DOWN
LEFT
RIGHT
STANDBY
OPEN/CLOSE
SCAN SWAP CALL
MUTE
1234
5678
9 0
-/--
SOURCE
DTV/DVD
P+
P-
V- V+
MENU
ZOOM AUDIO
STOP
SETUP
PAUSE/STEP
REV FWD PREV NEXT
D.MENU
EXIT
PROGRAM
PLAY/ENTER
SUBTITLE
ANGLE
TITLE/PBC
SEARCH
SLOW
D.CALL
10+
A-B
TUNE
NICAM
P.S TD
EPG
OK
FAV
i
REPEAT
SIZE
TIME
REVEAL
MODE
MIX
TEXT
SUBCODE
HOLD
(For TV/DVD Combi Models)
Fast text button in analog
signal
Function button in DVBT
(just reference the OSD)
DTV/RADIO
LANG TIMER
(Language fast
button in DTV)
Remote Control Key Functions(for TV/DTV only)
When using the remote control, aim it
towards the remote sensor on the TV
Buttons on the remote control
Stand By
NICAM
Sleep
Switch to PC mode
Return the last watched program channel
Mute
Automatically adjust in PC mode
Call Screen Display
Program Number
Picture mode
Source Exchange
Digital Selector
DTV/TV
Volume/Channel Selection
MENU
Sound mode
Zoom
DVB-T MENU
DVB-T ok button
DVB-T SUBTITLE
DVB-T Cursor Move button
DVB-T favourite
Exit Screen Display
RED button
Green button
Blue button
Yellow button
DVB-T EPG button
DVB-T information button
TELETEXT BUTTONS
TEXT BUTTON
(Language fast
button in DTV)
UP
DOWN
LEFT
RIGHT
STANDBY
NICAM
PC AUTOAD DISPLAY
MUTE
1234
5678
90
-/--
SOURCE
DTV/TV
P+
P-
V- V+
MENU
S SM ZOOM
SUBCODE
MIX
MODE
REVEAL
SIZE
TIME INDEX
D.MENU
TEXT
EPG
SUBTITLE
FAV
INFO
EXIT
HOLD
P. S TD
SLEEP
OK
i
Q.VIEW
(For TV /DTV Models)
Note: the instruction on this manual is
taking TV/DVD combi remote control as
an example.
Fast text button in analog
signal
Function button in DVBT
(just reference the OSD)
DTV/RADIO
LANG TIMER
Remote Control Key Functions
Installing Batteries
3
2
1
1.Open the cover of the battery compartment at the back of the remote
control.
2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
Precautions
Make sure that there is no
obstacle between the remote
controller and television set.
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Keep the remote controller
away from heat source or
humid area to ensure
effective performance of
the remote controller.
Make sure that two AA 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable. If your TV is to be
stored for a period of time, remove the
batteries from the remote control.
Connection Instructions
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gas pipes.
Grounding
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
VHF antenna
UHF antenna
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Be careful not to bend the bronze
wire when connecting the antenna.
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
If the antenna needs to be split for two
TV s, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
NOTE: All cables shown are just for example.
RF coaxial wire (75 ohm)
ANT IN
ANT IN
Connection Instructions
You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).
VGA Input
Connection and use steps:
1.Read the user guide supplied with
your computer and ensure that it has
a VGA connector;
2.Make sure that the power of the LCD
-TVandthePCareoff;
3.ConnectaDtype15-pinVGAinterface
cable ( not supplied ) to the VGA video
interface connector on the PC. Then
connect the other end to the PC video
interface connector on the back of the
LCD-TV.Tighten the screws on the VGA
connectors once they are firmly
connected, connect the audio cable(not
supplied)to the audio input on the back of
your LCD-TV;
4.Turn on the power of the LCD-TV first ,
and then turn on the power of the PC;
5.Press the button to set the video
input mode of the LCD-TV to PC;
6.
SOURCE
Check the image on your TV. There may be noise associated with the resolution,
vertical pattern, contrast or brightness in PC mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card cannot be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.
Frame frequency (Hz)Line frequency (Khz)
VGA
SVGA
XGA
640*480 31.5KHz 60Hz
800*600 37.9KHz 60Hz
1024*768 48.4KHz 60Hz
Mode Resolution
Note: All above listed are subject to VESA Criteria.
YPbPr Input
Connect the DVD video outputs (Y, PB, PR)
totheCOMPONENT(Y,Pb,Pr)INsocketon
the TV and connect the DVD audio outputs
to the AUDIO IN jacks on the TV, as shown
in the figure.
If your DVD player does not have
component video output, use S-Video.
1. Turn on the DVD player, insert a DVD.
2. Use the button on the remote control to select
How to connect
NOTE:
Howtouse
SOURCE
VGA IN
Connection Instructions
COMPONENT (If connected to S-VIDEO,select the S-VIDEO external
input source.)
3. Refer to the DVD player's manual for operating instructions.
To get better picture quality, connect a DVD player to the component
input ports as shown below.
Component Input ports
S-VIDEO Input
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are switched off;
.Turn on the power of the LCD-TV first ;
and then turn on the power of the AV
device;
4.Press the button to set the video
input mode of the LCD-TV to S-VIDEO
mode .
SOURCE
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and S-VIDEO cables
from the VCR's output jacks to the TV
input jacks, as shown in the figure.
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
3
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
.
VCR
1
2
Connection Instructions
SCART Input
1.Connect the scart lead from the external device(DVD
players, settop boxes or game consoles, to the TV SCART
socket.
2.Press to select SCART mode.
3. Press Play button on external equipment and it should
appear on the screen.
SOURCE
HDMI
HDMI
HDMI Input
HDMI Devices
Howtouse
Connect the cable from the HDMI devices
to the TV HDMI, as shown in the figure.
1. Select the HDMI source by using the
button on the remote control.
2. Operate the corresponding external equipment.
Refer to external equipment operating guide.
SOURCE
SCART
External equipment
Note: The audio cable included with the TV should be used when connected with PC/
COMPONENT/S-VIDEO.
TV
HDMI Devices
Wall Mounting
Use 4 machine screws(M4x8mm not included) to mount
the TV on the Bracket(not included)
For the Wall Bracket-Refer to the user instructions
supplied with the wall bracket(not included)
Remark: Wall mount is not applicable to 15 inch TV
STANDBY
OPEN/CLOSE
SCAN SWAP CALL
MUTE
1234
5678
9 0
-/--
SOURCE
DTV/DVD
P+
P-
V- V+
MENU
ZOOM AUDIO
STOP
SETUP
PAUSE/STEP
REV FWD PREV NEXT
D.MENU
EXIT
PROGRAM
PLAY/ENTER
SUBTITLE
ANGLE
TITLE/PBC
SEARCH
SLOW
D.CALL
10+
A-B
TUNE
NICAM
P.STD
EPG
OK
FAV
i
REPEAT
SIZE
TIME
REVEAL
MODE
MIX
TEXT
SUBCODE
HOLD
DTV/RADIO
LANG TIMER
Basic Operating Instructions
Turn on the LCD-TV
When the button on the remote control
is pressed and the LCD-TV is turned on, the indicator light on
the front of the LCD-TV changes from red to green. When the
LCD-TV is turned off using the button,
the LCD-TVwill go into standby mode and the indicator light
turns red.
You can also turn on the TV from standby mode by pressing
the digits(1-9) or P+/- .
POWER(STANDBY)
POWER(STANDBY)
Audio Control
1.Press the button to increase the volume.
2.Press the button to decrease the volume.
V+
V-
Mute
1.Press the button to mute the sound temporarily. A mute icon
appears on the screen.
2.Press the button or to restore the sound.
The mute icon disappears.
MUTE
MUTE V+again
AUTO SEARCH
UNITED KINGDOM
NO YES
AUTO SEARCH
OTHER
NO YES
Or
The display will appear on the screen when the TV is turned on the first time:
(Different displays for different countries, please see the real set)
Press to adjust among countries list on the screen just according to the
country you are in, - to select the option and to confirm.
V+/-
P+/ MENU
Basic Operating Instructions
Select the TV Channel
You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 100 channels , and you can press the keys on the
remote control or on the panel to make a selection.
1. if you want to choose any channel from 0 to 9, please press the button
until is indicated on the screen and then press the relevant key on the
remote control. for example: if you want to choose channel 8, just press the
Key number 8.
2.If you want to choose a channel bigger than 9, please press the button
until is indicated on the screen. Enter the two digits of the channel
number you want to watch.. for example: select channel 16
Note: if you want to choose one digit channel in this condition, you should press
0 first and then one digit number key.
-/--
-
-/--
--
Picture Mode
Press button on the remote control for menu display . For desired mode as
follows:
PERSONAL STANDARD MILD FRESH
P. S T D
Program Swap
1
2
3
Suppose the channel number you used is now channel 8 and the channel number you
are using is 18 (as shown in the figure).
If you want to return to the last watched program channel 8, you can simply press the
button.
If you want to return to channel 18, press the button again. Through this function, you
can easily change between the channel you are using and the channel you used last time.
SWAP(Q.VIEW)
Loading...