Haier LE22P600, LE24P600 Schematic
22″&24″ LCD TV Haier LE22P600&LE24P600
Service
Service
Service
Table of Contents
Description Page Description Page
Table of Contents.......……...................................….....1
6.2 Power Board……..…………………...…….…........34
Important Safety Notice.......................................……..2
Revision List………………………………………………..3
1. General Specification....................................……….....4
2. Operating Instructions..………………….……...……..5
2.1 Remote Control…………….……...…………...……....5
2.2 OSD Menus…………....………………….….………....7
2.3 Panel Control And Rear Terminal Control………...17
3. Input/Output Specification………….....................….20
4. Mechanical Instructions……………………................23
5. Repair Flow Chart ……………………………………...25
6. PCB Layout …………...………………………………..32
6.1 Mian Board……………………………………............32
6.3 IR Board………….……………..……….…..............37
6.4 Key Board…………………………………………….38
7. Adjustment...............................................................39
7.1 ADC/WB Adjustment..............................................39
7.2 Firmware and DDC Instruction..............................40
8. Block Diagram..…..…..............................................41
9. Wiring Diagram....…….............................................42
10. Schematic Diagram.………..…….………………....43
10.1 Main Board………..…….…………………...…......43
10.2 Power Board……..…..…....…………...……….....52
10.3 IR Board………….……………..……….….......54
10.4 Key Board………………………………………...…55
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
1
Important Safety Notice
Proper service and repair is important to the safe, reliable operation of all Haier Company Equipment. The service
procedures recommended by Haier and described in this service manual are effective methods of performing
service operations. Some of these service operations require the use of tools specially designed for the purpose.
The special tools should be used when and as recommended.
It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in
order to minimize the risk of personal injury to service personnel. The possibility exists that improper service
methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE
NOT EXHAUSTIVE. Haier could not possibly know, evaluate and advise the service trade of all conceivable ways in
which service might be done or of the possible hazardous consequences of each way. Consequently, Haier has not
undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not
recommended by Haier must first satisfy himself thoroughly that neither his safety nor the safe operation of the
equipment will be jeopardized by the service method selected.
Hereafter throughout this manual, Haier Company will be referred to as Haier.
WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics might create
shock, fire, or other hazards.
Under no circumstances should the original design be modified or altered without written permission from Haier.
Haier assumes no liability, express or implied, arising out of any unauthorized modification of design.
Servicer assumes all liability.
FOR PRODUCTS CONTAINING LASER:
DANGER-Invisible laser radiations when open AVOID DIRECT EXPOSURE TO BEAM.
CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION -The use of optical instruments with this product will increase eye hazard.
TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF
THIS SERVICE MANUAL.
Take care during handling the LCD module with backlight unit
-Must mount the module using mounting holes arranged in four corners.
-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen.
-Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to
the panel.
-Protect the module from the ESD as it may damage the electronic circuit (C-MOS).
-Make certain that treatment person’s body is grounded through wristband.
-Do not leave the module in high temperature and in areas of high humidity for a long time.
-Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may
damage the panel.)
2
Revision List
Version Release Date Revision Instructions Customer Model Model
A00 May.30, 2013 Initial release LE22P600 E2AD21NCCLH65N
A01 Jun.18, 2013 Add new model LE24P600 E2CD21NCCLH62NX
LE24P600 E2CD21NCCLH8NN
A02 Mar.11,2015 Add new model
LE24P600 E2CE21NCCL7H5NQ
LE22P600 E2AD11NCCL6HNN
3
1. General Specification
4
2. Operating Instructions
2.1 Remote Control
5
6
2.2 OSD Menus
7
8
9
10
11
12
13
14
15
16
2.3 Panel Control and Rear Terminal Control
17
Loading...