Haier LE19K800, LE22K800, LE24K800 User Manual

LE19K800/LE22K800/LE24K800

TABLE OF CONTENTS

Important Safety Instructions… … ………… … ……… … ………… … ………… ………… … ………… …1
Product Introduction… …………… …………… …………… …………… …………… …………… …………3

General Information……… …………… …………… …………… …………… …………… …………… ………3
Features……… ………………… ………………… ………………… ………………… ……………………… …4
Listing………… …………… ………………… …………… ………………… …………… ………………… ……5

Installation
Panel Control Keys… ………… … … ………… … … …………… … …………… … …………… … … ………9
Remote Control………………… ……… …………… ……… ……… …………… ……… ……………………10
Basic Operation Instruction……… ………………… …… ………………… ……………………… ………12

Power On………………… ………………… ………………… ………………… ………………… …… ………12
Standby………………………………………………………………………… …… …… …… …… …… ………12
Signal Source Selection………………………………………………………… …… …… …… ………………12
Menu Operation Instruction ……… …………… ………………… ………………… …………… ……………12
PICTURE…………… ………………… …………… ………………… …………… ………………… …………13
SOUND … ………………… ……… ………………… ……… ………………… ……… ………… ……… ……14
OSD……… …………………… …………………… ……… …………… ……… …………………… ……… …15
TV……………………… …………… …………… …………… …………… …………… …………… …………16

Hotel Function(optional)

……… ………… … ………… ………… … ………… ………… … ……… … ………18
USB Signal Source Operation… …………………… ……… …………………… ……… …………… ………19

Simple Troubleshooting ……………………………………………………………………………………22

& Connection… ………… … ………… …………… ………… … ………… … ………… … ……6

Important Safety Instructions

Thank you to choose the LCD TV with LED backlight made by our company, a valuable product with excellent quality and
multiple functions. This machine will bring you more audiovisual enjoyment. Its design can insure user's safety. All
machine are strictly tested before leaving factory. But incorrect use can lead to electric shock or fire. In order to insure
safety and extend its life, please read below regulations carefully before using it and comply with the following safety
instructions.

1）Read the manual and marking label before using the machine, and keep the user manual for later use.
2）There is high voltage inside the machine, follow all the warnings and instructions strictly on the manual.
3）Don't use the attachments which are not recommended by the machine manufacturer as they may cause hazards.
4）The power cord must be placed correctly so as to avoid be trample or crush.
5）Please do not make the power socket overloaded or the power cord extended. Otherwise it will cause fire or electrical
shock.
6）If you are going to pull out the power cord from this product, please dry your hands, pull the cord by grasping the plug.
Never pull the cord itself.
7）If you will not use the machine for a long time, please pull out the power cord. Do not keep the sleeping mode for too
long time.
8）Please put this machine in the place of well ventilation instead of extremely hot, cool or moist, and direct sunshine.
9）The slots on the case is designed to release heat so as to assure that all inside components will not reach an extra
high temperature and can work normally for a long time. Please do not cover the holes while place it. Don't place the
machine near or over heat source or place in built-in installation.
10）The power cord must be taken off before you clean the machine. Don't use the liquid cleanser or aerosol cleanser. It
is recommended to use a wet soft cloth to clean the machine. Don't use the alcohol, impregnant or ammoniac liquid
to wipe the screen.
11）Please don't place it on an unstable position so as to avoid falling off.
12）Don't place the LCD TV near water source, like a bathtub, pool, washing machine, or moist cellar and similar
environment.
13）The LCD panel is fragile and expensive. The surface of the panel is easy to be scratched. Please don't use the hard

1

thing to knock, press, score the panel. Otherwise it will be harmful for the panel. The exchange cost is very high.
14）There is high voltage inside the machine but no parts which can be repaired by users themselves. In order to assure
the people's safety, please don't open the case to repair it by yourself. If it is needed to repair, please contact
qualified engineer to repair.
15）All cables can be connected or pull out only after power supply is turned off.
16）During a thunder rain weather, do not touch the power cord and antenna cable.
17）When the following troubles occur, please pull out the plug and call the professional engineers to repair.
A. The cable or plug is damaged.
B. The product was fallen down or the case is damaged.
C. Obvious abnormal situation occurs. In spite of correct operation according to the user manual but it still can't work
normally.
D. Some abnormal substances or liquid fall into it.
E. Unusual sound or smell sends out.
18）When the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.

19) The machine should not suffer from waterdrop or watersplash, do not place the vessel with water (or other liquids) on
it, for like this it is possibly to cause fire or electric shock.

20) The attaching plug should be inserted into the power point completely, otherwise it may cause spark to bring fire.

21) Please do not put candle, ash-tray, incense, inflammables or explosive nearby this machine.

22) Please do not stretch into any sharp object, metal or liquid, or touch the signal attachment or the inner of radiation
hole, in order to avoid short circuit and product damage, or possibly causing electric shock. Especially pay attention
when there are children on the spot.

23) Please don't use the machine immediately when moving the machine from low temperature place to high temperature
one, or install and use at the place of facing air conditioning, otherwise it may cause the condensation in the machine,
to cause fault.

24) Must be careful when moving this machine, avoiding being struck, especially pay attention to protect the screen part.
In addition, if using handcart, must note the injury as the product is overturned from the handcart because of hard
braking, overexerting and uneven ground.

2

Product Introduction

General Information

● High-quality LED backlight LCD screen, energy saving, environmental protection, ultra-thin, brilliant features.

● Having inter high quality speakers, which will give you purely audiovisual enjoyment and save your table
place.

● Having many ideal connectors, you may directly connect your DVD, vidicon etc. its disport components of
input connector let you enjoy beautiful image effect. The product can be used as a computer monitor with
VGA and HDMI connectors. Also it can be used as a TV machine when you insert the antenna.

● Much faster response time will completely eliminate shadow of picture. seeing film and playing game may
be more fluent.

● Enough colours can reach 16.7 millions kinds .

● Wider viewing angle, higher brightness, higher contrast, lower consumption.

● Intelligent image mode and sound mode can offer you intelligent audiovisual effect.

● Built-in the latest digital comb filter, which makes image more clear. The internal 3D De-Interlace technique
can totally eliminate the screen dithering caused by interlace signals.

● Own perfect timing functions, you can set time to turn off. It will be turned off in state of no signals, too.

● Automatically operated convenient with telecontrol device.

● Auto-setup function help you set the image to best performance in several seconds in PC mode.

● Auto color balance adjustment technology takes your machine to the best color setting for all different kinds
of display adapters in PC mode.

● Automatic denoise technique can greatly eliminate background noise caused by menu interference and the
noise caused by weak signals so as to make the picture on the screen clear.

● Support USB interface.

3

Features

● interface specification:

Inte rface Spec ificati on

VGA
HDMI

CVBS Input/Output
S-VIDEO Input
YCbCr/Ypbpr

Audio Input/Output
TV(RF)
Earphone

● The Tec hn ic al S pe ci fi ca ti on s fo r Fi na l Pr od uc t● The Tec hn ic al S pe ci fi ca ti on s fo r Fi na l Pr od uc t

Panel size
Max. Resolution
Best resolution
Pixel pitch
Active area
Unpacking Dimension(L×H×W )
Packing Dimension(L×H×W)
Net weight
Gross weight
Color

DB-15, 75Ω 0.5~0.7Vp-p H/V:TTL Level (Support mode refer to VGA Input Mode )
Video signal: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: LPCM
48KHz, 44.1KHz, 32KHz, 24Bit, 20Bit, 16Bit
75Ω 1Vp-p (PAL/NTSC/SECAM)
Y: 75Ω 1Vp-p; C: 75Ω 0.286Vp-p
Y: 75Ω 1Vp-p; Cb/Cr: 75Ω 0.7Vp-p
Signal mode: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
20KΩ, 0.5Vp-p
75Ω Imbalance
16~300Ω 100mW+100mW

18.5"
366 768

1 ×

360 768

1 × @60Hz

0.3mm×0.3mm

409.80mm×230.40mm

× × mm

469 362 36

× × mm

528 415 100

4.0Kg

5.0Kg

16.7M

21.5"
1920×1080
1920×1080@60Hz

0.24825mm×0.24825mm

476.64mm×268.11mm
535×394×36 mm
595×445×100 mm

5.0Kg

6.0Kg

16.7M

4

23"
1920×1080
1920×1080@60Hz

0.2655mm×0.2655mm

509.76mm×286.74mm
568 418 36

× × mm

630×465× mm
4Kg
5Kg

16.7M

100

Power adapter: Volume:
TV receive system: PAL+NTSC/PAL+SECAM Storage channels:

100-240VAC 60/50Hz 3W+3W

199

● Working Environment: Atmosphere pressure: 86kPa～104kPa Temperature: 5℃～40℃ Humidity: 10%～85%

● Storage Environment: Atmosphere pressure: 86kPa～104kPa Temperature: -20℃ ～55℃ Humidity: 5%～95%

● VGA input mode

18.5"

S/N

1
2
3
4
5

Mode Resolution

VGA

SVGA

XGA

WXGA

720×400
640×480

800×600
1024×768
1360×768

Refresh(Hz)

70
60
60
60
60

No te : Recommended mode: @60Hz1360×768

● Power supply: Comply with EPA standard, compatible
with VESA DPMS standard.

Mode

On
Standby

Power L ED i nd icato r

Off
On

Power c on su mptio n

18.5" / 21. 5"

≤35W

≤1W

23"

≤40W

≤1W

21.5 / 23" "

S/N

1
2
3
4
5
6
7
8
9

10

Mode Res ol ut io n

VGA

SVGA

720×400
640×480
800×600

1024×768

XGA

1280×720
1280×960

SXGA

WXGA

WUXGA

1280×1024

1360×768
1600×900

1920×1080

Refresh(Hz)

No te : Recommended mode: @60Hz1920×1080

Note : This specification is subject to change without notices. If there are differences between manual and real

operation, please do according to real operation.

Listing

Please make sure that all of the following items are complete：

● LCD TV (Include base) ● User manual ● Remote control
If any of above listed items is missing, please contact your dealer or our service department.

5

70
60
60
60
60
60
60
60
60
60

Installation & Connection

Antenna Connection: It is better to use outdoor antenna or CATV cable if you want to watch the colorful and hi-definition

pictures. Note: Please turn off TV power before the outdoor antenna is connected to the TV signal input port. Outdoor
antenna can't be located near the high-voltage wires. Please pull out the plug of outdoor antenna to avoid thunder shock
in thunder weather.

USB in terfac e

R

CVB S, DVD Pl ayer or o ther
mac hine wi th CVBS /S-Vi deo.

To power so cket AC 100 V-240 V, 60/50Hz

W

Y

Digit al audio output

Earph one Sock et

G Green (Y)

B Blue (Pb/Cb)

W White(AUDIO-L )

R Red (AUDIO-R, Pr/Cr)

Y Yellow (VIDEO)

Aud io/Vi deo mac hine
wit h HDMI in terfa ces

6

Power Connection: nsert the power plug into the socket of the electrical source (

I AC 100V-240V, 60/50Hz).

Note s:

1. When connecting the power cord, be sure to turn off the machine and other equipment's power.

2. If a long time at leisure, please disconnect it from power supply.

CVB S, DVD Pl ayer or o ther
mac hine wi th YPbP r/YCb Cr.

3. This TV must be connected to a three pin socket outlet for safety.

Computer Connection: Please connect one end of VGA cord with
the output port of the computer (available for both desktop or laptop
computer), and another end of VGA cord with the input port of the

B R

G

W

VGA on its rear cover.

HDMI Digital Port Connection: Connect external HDMI high signal
source to HDMI digital input port of this machine through HDMI digital
connector cable; push "SOURCE" button to select HDMI signal
source.

R

AV1/AV2 Video Signal Connection:

Through composite cable,
connect AV equipment VIDEO output termination to this machine
VIDEO input, and AV equipment AUDIO output termination to this
machine AUDIO input, respectively; Press "SOURCE" key to select
"AV1" or "AV2" signal source.

SPDIF-OUT: Digital audio output, connect an external amplifier with
optical audio decoding device.

7

R

W

Y

CVB S, DVD Pl ayer or o ther
mac hine wi th CVBS /S-Vi deo.

Y

W

AV machine

R

Earphone Socket: The TV speakers will be shut off when earphone is inserted into this socket.(

Please adjust the volume

to a suitable size, to avoid sounds excessive to affect the hearing.)

S-VIDEO Input Connection: Through S-VIDEO/AUDIO cables to connect external AUDIO/VIDEO equipment to the
machine's AUDIO/VIDEO input port, and press "SOURCE" key to select "S-VIDEO" si l source

gna

AV-OUT Connection: If you need watch image of DV and connect your TV game machine, you can connect audio or
video output end of DV and game machine to the monitor.

YPbPr/YCbCr Input Connection

If the signal source is DVD, Digital wired receiver or equipments with the YPbPr/YCbCr output, recommends you to
connect YPbPr or YCbCr output with the TV YPbPr/YCbCr input. In order to obtains the better picture quality, at the same
time, please connect its audio output with TV audio input as shown in the following chart. If you choose the YPbPr/YCbCr
signal, please set signal source selection under YPbPr pattern.

Base installation

Wall M ounti ng Stan d

Base equipment act as the picture. Equip the base
with the machine according to arrow point, and lock
the bolt tightly.

Wall Mounting subassembly

installation

Wall M ounti ng Boar d

Installation for VESA Wall Mounting

1. Take off the base

subassembly

2. Fasten the wall mounting board. ( The height can be confirmed by the user)

3. Fasten the wall mounting stand at the position of VESA on the rear cover with bolts.

4. Spin M4 bolts into the left-right nuts on the wall mounting stand. 3-4 mm of depth from bolts washer to stand is
recommended.

8

5. Hang the machine onto the slot of the wall mounting board. Then lock the two bolts on the sides.

Note : ● Installation method is different because of Hanging arm hardware's .

●

Must install the wall pendant on firm wall surface, please do not install this machine on ceiling or vehicles.

structure

Panel Control Keys

4

5

6

7

1

2 3

8

3

1. Remote Receiving Sensor.

2. Power Indicator.

3. Power switch.

4. SOURCE: Press this key to enter the menu of signal source and choose signal source.

5. CH+/CH-: Press these two keys to choose channel, and adjust the options you need under OSD operation.

6. VOL+/VOL-: Press these two keys to add or reduce volume, and adjust the analog value under OSD operation.

7. MENU: Press this key to enter main menu.

8. Power on/Standby .

Note : There are some apparent differences between modes, please according to practicality.

9

Remote Control

Pow er

Num erica l key

Sma rt soun d

Volu me

INFO 16:9

Inf o

Time

Inv alid

Col or

COLOR

PLAY

PAUSE

PREV. NEXT REV.

P N

AUDI O

STOP ROTATE

F WD.

Inv alid

Mut e

Pro gram li st

Sma rt imag e

OK

Cur sor Key

Men u

Cha nnel

Sou rce

Zoo m
Ret urn

Col or syst em

Key

POWER
MUTE
Numerical key
F1
Program list
SMART S
SMART P

Cursor key

VOL+/VOL­MENU
SOURCE
CH+/CH­INFO
Time
Return
16:9
Color
P/N
AUDIO
OK
PLAY ( )
PAUSE ( )

Function

Turn on or standby
Eliminate sound
Number input button
Freeze picture
Look through program list
Intelligent sound mode selection
Intelligent image mode selection
Up or Down cursor button: function select;
Left or right cursor button: analog add or reduce
Sound volume add or reduce button
Press this button to display menu
Press this button to display signal source selection menu
Select channel Number
System information display switch
Timer setting button, press this key can set time of turning down.
Press this button to return to last watching channel
Switch aspect ratio
Color temperature mode selection button
Color system mode selection button
Select audio mode
Confirm operation

For USB operation

10

STOP ( )
ROTATE ( )
PREV. ( )
NEXT ( )
REV. ( )
F WD. ( )

For USB operation

Remote control battery installation method:

Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform with the polarity of remote control
battery box.

Note : Appearance of the remote control may be different from this picture, please according to practicality.

Precautions for use of remote control:

1. When using remote control you should point it to the remote-control inductive window. The goods between remote
control and inductive window may hinder normal operation.

2. Do not cause the remote control to receive fierce vibration. In addition, do not set or place the remote control under
direct sunlight, for the thermal energy will cause the distortion of remote control.

3. When remote-control inductive window of main machine is under direct sunlight or intense illumination, the remote
control may malfunction, by now, please change the angle of illumination or this machine, or approach the inductive
window to operate the remote control.

4. When the battery voltage is insufficiency it influences the remote control distance, you should replace with new battery;
when not to use the remote control for long or the battery is exhausted, please take out the battery, in order to avoid
bringing the battery leakage to corrode the remote control and thus cause it out of commission.

5. Do not use different batteries. The mix use of new and old batteries is not allowed, you should use battery pair.

6. Do not throw battery into fire, charge or disassembly, especially do not charge, assemble and disassemble, heat or
burn to the used battery. Please observe the related environmental protection stipulation on wasted battery.

11

Basic Operation Instruction

Power On

Plug power cord into the electrical socket, press '' '' button on the control panel, then press '' '' key on the control
panel, or press ''POWER'' key on the remote control to turn on the TV.

Standby

Press ''Power''key on the remote control. TV will be in standby.
★Special Attention:

1. TV set will automatically turn to standby if there is no signal input for 5 minutes when TV turns on.

2. TV set will automatically turn to standby when the preset time of turning off reaches.

3. If you do not use it for a long time, please turn off the power supply for the machine. Do not let the machine work in
standby state for a long time.

Signal Source Selection

Press ''SOURCE'' key either on the remote control or on the control panel. ''Input Source'' will be
displayed on the screen. Then press ''Up/Down'' key on remote control or "CH+/CH-" key on the

control panel to choose the signal source. Press ''OK'' key on the remote control or ''MENU" key on

the control panel and TV will switch the current signal source to the signal source you choose.

Menu Operation Instruction

Press ''MENU'' key on the remote control or on the control panel, then the TV will display the main menu.

1. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-'' key on the control panel to select the adjustment sort
menu, which includes 4 sorts:

2. Press ''Down''key on the remote control or ''CH-'' on the control panel to enter the adjustment sort menu.

PICTURE, SOUND, OSD, TV.

12

Input Source

TV

AV1

AV2

S-VIDEO

YPbPr

PC

HDMI1

HDMI2

HDMI3

USB

3. Press ''Up/Down'' key on the remote control or ''CH+/CH-'' on the control
panel to select what is needed to adjust in sort menu.

4. Press ''Left/Right'' key on the remote control or ''VOL+/ VOL-'' on the
control panel to adjust the value or setting.

5. Press ''Menu'' key to exit the main menu when the TV displays the Main
Menu; Press ''Menu'' key to return to previous menu when the TV
displays the submenu; Press ''Source''key to display the signal source
menu or exit signal source menu.

6. During the operation, the selections which can not be adjusted at current
mode will be hidden automatically and the color of the selections will be
changed into gray.

Picture Mode

Contrast

Brightness

Saturation

Hue

Sharpness

Aspect Ratio

Color Temp.

Noise Reduction

Adju st Sele ct Menu:Exit

Standard

Sof t

48
48
50

50

55

Full

Of f

7. Menu Operation Instruction in this manual is explained according to TV mode. The operations in other modes are
similar to the one in TV mode. Users can take it as reference.

PICTURE

Select to enter the PICTURE submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key on the control
panel to choose what you need. Press the "Left/Right" key on the remote control or the "VOL+/VOL-" key on the control
panel to adjust analog value or state (see below table).

★Special Attention

1. The Hue function is available only for NTSC system.

2. The value adjusted by user, such as Contrast, Brightness, Saturation, Hue, and Sharpness will be saved
automatically by the machine as personal mode.
★Remote Control Shortcut Keys
SMART P: Press SMART P key on the remote control. You can switch the function among the "Standard", "Soft", "User",

"Bright" four modes.
16:9: Press 16:9 key on the remote control, you can switch the mode among the "Full, "4:3", "Subtitle", "Film" four modes.

13

Option

Picture Mode
Contrast

Select picture mode
Adjust the contrast of whole picture

Function Descripti on

"Standard", "Soft", "User," "Bright" four modes.
Increasing analog value increases Contrast;
Decreasing analog value decreases Contrast(0-100).

Brightness

Saturation

Adjust brightness and blackness of
whole picture
Adjust the saturation of whole picture

Increasing analog value increases brightness;
Decreasing analog value decreases brightness(0-100).
Increasing analog value increases color;
Decreasing analog value decreases color (0-100).

Hue

Adjust the hue of whole picture

Increasing analog value increases green;
Decreasing analog value increases purple(0-100).

Sharpness

Adjust the sharpness of whole picture

Increasing analog value increases definition;
Decreasing analog value decreases definition (0-100).

Aspect Ratio
Color Temp

Noise Reduction

Select picture scale
Select color temperature mode of the
picture
Select model of 3D NR

"Full", "4:3", "Subtitle","Film" four modes
There are three Color Temperature modes: "Standard",
"Warm", "Cool ".
"Middle", "High", "Off", "Low".

SOUND

Select to enter the SOUND submenu. Press "Up/Down" key on the
remote control or the key "CH+/CH-" on the control panel to choose what
you need. Press the "Left /Right" key on the remote control or the "VOL+/
VOL-" key on the control panel to adjust analog value or state (see below
table).

★Special Attention

1. Normally, 0 value of adjustment is recommended;

2. The treble or bass analog value which is adjusted by the users will be
saved as the User mode by the machine

14

Sound Mode

Treble

Bass

Balance

Auto Volume

Adju st Sele ct Menu:Exit

Standard

50
50
0

Of f

★Remote Control Shortcut Keys
SMART S: Press SMART S key on the remote control. You can switch the function among the
"Movie", "User" four modes.

MUTE: Open or close sound.

VOL+/VOL-: Add or reduce volume.

Option

Sound Mode
Treble

Adjust audio effect mode
Adjust treble value

Function Description

"Standard", "Music", Movie", "User" four modes.
Increasing analog value increases treble;
Decreasing analog value decreases treble (0-100).

Bass

Adjust bass value

Increasing analog value increases bass;
Decreasing analog value decreases bass (0-100).

Balance

Adjust balance of left or right sound

Increasing analog value decreasing left volume;
Decreasing analog value decreases right volume(L50-R50).

Auto Volume

Select Auto Volume

"On/Off", two states.

OSD

Select to enter the OSD submenu. Press "Up/Down" key on the remote
control or "CH+/CH-"key on the control panel to choose what you need.
Press the "Left/Right" key on the remote control or the "VOL+/VOL-" key
on the control panel to adjust analog value or state (see below table).

15

OSD Language

OSD Duration

OSD Transparency

Blue Screen

Sleep Time

Recall

Adju st Sele ct Menu:Exit

, "Standard", "Music",

English

60 Second

0

On

Off

Option

OSD Language
OSD Duration

Function Descri pt io n

elect language for OSD display

S
Adjust duration of OSD menu

There are many languages to select
Increasing analog value, extend duration time of OSD menu;
(15, 30, 45, 60). Unit: second

OSD Transparency

Adjust halftone of OSD menu

Increasing analog value increases halftone;
Decreasing analog value decreases halftone(0-100).

Blue Screen
Sleep Time
Recall

Open or close blue screen
Set sleep time of the machine
Resume to setting of factory

"On/Off", two states.
"Off, 15M, 30M, 45M, 60M,90M, 120M, 240M", unit: minute.
Reset all values to setting of factory.

TV

Select to enter the submenu. Press "Up/Down" key on the remote
control or "CH+/CH-" key on the control panel to choose what you need.
Press the "Left/Right" key on the remote control or the "VOL+/VOL-" key
on the control panel to adjust analog value or state (see below table).

Option

Color System
Sound System
Skip
Auto Search
Manual Search
Fine Tune
Channel Edit

Auto Search

Select to enter the submenu of . Then press ''Up/Down'' key on the remote control or ''CH+/CH-'' on the control
panel to select '' ''. The machine perform search after pressing ''Right '' key on the remote control or ''VOL+''
on the control panel. (In the process of searching the channel automatically, press the key of ''MENU'' on the remote
control, a of dialogue "Do you want to exit searching?" display on the screen. Press "Left" cursor key to confirm and exit.

TV

Function Description

Select color system
Select sound system
Select skip or not
Select auto search
Select manul search
Select fine tune
Select channel edit

PAL, NTSC, AUTO three modes.

" "
"I, DK, M, BG" four modes.
"Off/On" two states.
Please refer to Auto Search
Please refer to
Please refer to
Please refer to

TV

Auto Search

" "
" "

Manual Search

" "

Fine Tune

" "

Channel Edit

16

Color System

Sound System

Skip

Auto Search

Manual Search

Fine Tune

Channel Edit

Adju st Sele ct Menu:Exit

45.30 MHz

PAL

DK

On

Press "Right" cursor key to cancel operation and continue auto search

). All of the TV programs will be saved automatically.

Manual Search

Select to enter the submenu of . Then press ''Up/Down'' key on the remote control
or ''CH+/CH-''on the control panel to select '' ''. Then press the key of
''Right'' on the remote control to enter submenu of Press ''Left/Right'' key

TV

Manual Search

Manual Search.
on the remote control to select channel No.. Press ''Up/Down'' key on the remote control
to select '' '', press ''Left/Right'' key on the remote control again, the machine

SEARCH
begin searching toward low frequency or high frequency. (In the process of searching the
channel automatically, press the key of ''MENU'' on the remote control to stop searching).

Fine Tune

Select to enter the submenu of . Then press ''Up/Down'' key on the remote control or
''CH+/CH-'' on the control panel to select '' ''. Press ''Left/Right''key on the remote

TV

Fine Tune

control to adjust from low frequency or high frequency.

Channel Edit

Select to enter the submenu of . Then press ''Up/Down'' key on the remote control
or ''CH+/CH-'' on the control panel to select '' ''. Press ''Right'' key on the
remote control to enter submenu of '' ''

Delete

: Press ''Up/Down'' key on the remote control to select channel which you wish

TV

Channel Edit

Channel Edit

delete. Press "1" key on the remote control, press "MENU" key to return.

Move

: After select channel, press "2" key on the remote control, then press ''Up/Down''

key on the remote control to select position where you wish place, then press "MENU"
key on the remote control to return.

17

Auto Search

Found : 0 Progtranme

0 %... 50.25 MHz VHF-L

Menu:Exit

Manual Search

CH: 1

Search

Frequency 45.25 MHz

Menu:Exit

Channel Edit

1 CH

2 CH
3 CH
4 CH
5 CH
6 CH
7 CH
8 CH
9 CH

1:Delete

2:Move 3:Skip

OK:Enter Menu:Exit

Skip: Press ''Up/Down'' key on the remote control to select channel, press ''3'' key on the remote control to open or close

"

''Skip .

Select Channels with "CH+/CH-" Key

Press ''Channel'' key on the remote control or "CH+/ CH-" key on the panel to select the channels. Select channels

control
with the Return key you can go to the last channel when pressing the Return key. For example, if the last channel is 10
and the current channel is 20, you will go to channel 10 when pressing the Return key. You can switch the two favourite
channels as you like.

Select Channels with Numeric Keys

1. Operations to select channels with 1 digit (0-9):
Press the number keys (0-9)on the remote control to select TV channel directly.

2. Operations to select channels with 2 digits (10-99):
Press the number keys with 2 digits (10-99) on the remote control to select TV channels.

3. Operations to select channels with 3 digits (100-199):
Press the number keys with 3 digits (100-199) on the remote control to select TV
channels.

Hotel Function(optional)

Press MENU key on the remote control to display the main TV menu, and then press

" "
"4578" on the remote control to display the hotel function menu. Press "Up/Down" key to
enter into the menu and select the item which you need to adjust, and then press "Left/

HOTEL MODE

CH LOCK

MAX VOL

AUTO SET

PICTURE MODE

POWER VOL

POWER SOURCE

CH NUMBER

KEY LOCK

LOCK CH NUM

LOCK

CLONE

ON

OFF

100

ON

STANDARD

30

TV

1

OFF

1

OFF

Right" key to adjust the value or state.

Not e: With the mode of AV, S-VIDEO, YPbPr, PC, HDMI, all functions and adjustments are similar with TV. User can
check it at convenience. HDMI connector can realize DVI connector functi on w ith external HDM I/DVI commut ator.

18

USB Signal Source Operation

Please insert USB memory card into USB interface of TV, press "SOURCE" key on the remote control or control panel to
select USB signal source, press "OK" key to enter.

Note :

① USB function support file format with video file/sound file/graphic file/text file. For some nonstandard USB storage
devices, may appear condition of unable recognize, please
replace the standard USB storage device.

②

Streaming media system to play a file for each format has
certain limitations, if more than the system limit, then play
will be wrong.

③

Do not pull up USB storage devices when system playing,
this may result in system or equipment problems

④

The system supports USB1.1 and USB2.0 connector, the
standard transport protocol such as U disk and removable
hard disk storage devices

Press

"Left/Right" key on the remote control to select the

.

document sort menu, which includes 4 sort: PHOTO, MUSIC,
MOVIE, TEXT.
★Remote Control Shortcut Keys
The last two row keys on the remote control are used for USB
operation.

PHOTO

Select to enter the PHOTO submenu. Select your mobile
U disk or hard disk, and press

"OK" key on the remote control to

read your photo documents.

19

USB 2.0

PHOTO MUSIC MOVIE TEXT

C:\PICTURE

Return Up Folder 10.jpg 11.jpg

13.jpg12.jpg

16.jpg 17.jpg

14.jpg 15.jpg

18.jpg 19.jpg

1 / 11

Select to return previous menu. Press cursor key on the remote control to select photo and press "OK" key (
photo was selected,

the file lower right corner shows a red hook. you can choose photos to join playlist.). Press "PLAY"

After the

key on the remote control to play. when you choose nothing, the machine will join all the photos in the file in playlist
automatically.

Basic Function
When photos are playing, press "INFO" key on the remote control, a toolbar will display under the screen (Press "Down"
key on the remote control to hide toolbar).

Play/Pause: Press press
pause .

Press press

Prev.: "Left/Right" key on the remote control to select this function, "OK" key to read previous
photo.

Press press

Next: "Left/Right" key on the remote control to select this function, "OK" key to read next photo.

Press press

Stop: "Left/Right" key on the remote control to select this function, "OK" key to stop playing and
return to previous menu.
Repeat: "Left/Right" key on the remote control to select this function, "OK" key to select repeat
One or repeat all or not repeat.
Music: "Left/Right" key on the remote control to select this function, "OK" key to play background
music.(Musics and photos need to place in the identical folder, or you may select some music in music file first.)

Playlist: "Left/Right" key on the remote control to select this function, "OK" key to show playlist.

Info. : "Left/Right" key on the remote control to select this function, "OK" key to show the

information of photo. Including resolution, size and so on.
Clockwise: "Left/Right" key on the remote control to select this function, "OK" key to clockwise
rotation photo.
Counter-clockwise: "Left/Right" key on the remote control to select this function, "OK" key to
counter-clockwise rotation photo.

Press press

Press press

Press press

Press press

"Left/Right" key on the remote control to select this function, "OK" key to play or

Press press

Press press

20

MUSIC

The operations are similar to the "PHOTO". Please refer to "PHOTO" options.
Basic Function

Press press

FB: "Left/Right" key on the remote control to select this function, "OK" key to fast back. Press

Other functions are similar to the "PHOTO", Please refer to "PHOTO" options.

MOVIE

The operations are similar to the "PHOTO". Please refer to "PHOTO" options.
Basic Function

TEXT

The most operations and functions are the similar to "PHOTO". Please refer to PHOTO" o pt io ns . "

"PLAY" key to play normally.

Press press

FF: "Left/Right" key on the remote control to select this function, "OK" key to fast forward. Press
"PLAY" key to play normally.
Select time: "Left/Right" key on the remote control to select this function, "OK" key to select the
time to play .

Set A: "Left/Right" key on the remote control to select this function, "OK" key to set A and B, the
film will circulating play in the time of A to B.

Press press

SF: "Left/Right" key on the remote control to select this function, "OK" key to slow down play
speed. Press "PLAY"key to play normally.
Step: "Left/Right" key on the remote control to select this function, "OK" key to play one step by
step. Press "PLAY"key to play normally.
Zoom in: "Left/Right" key on the remote control to select this function, "OK" key to enlarge picture.
(If the document is larger than 1920 1080, this function is unsupported.)
Zoom out: "Left/Right" key on the remote control to select this function, "OK" key to reduce picture.
(This function does not support more than 1920 1080 HDvideo.)

Proportion:

proportion among Auto/4:3/Full.(This function does not support more than 1920 1080 Hdvideo.)

Press press

Press press

Press press

Press press

×

Press press

×

Press press

"Left/Right" key on the remote control to select this function, "OK" key to select

21

×

Simple Troubleshooting

Symp tom

Snowflake speckle and
sound noise.

TV image is better, but has
noise.

No image. No sound.

TV image have stripe.

TV image have shadow.

No color.

TV no sound.

Fact or

1.Antenna cable connector ,
cable is damaged.

2.Channel setting is incorrect.

3.Antenna cable type is not matching.

4.Direction or position of antenna
cable is incorrect.

5.Signal is weak.

TV system setting is incorrect. Enter to me nu , re se t so un d sy st em a ga in ."TV"

Power plug is loose, power
cord don't connect well.

Signal is exposed to disturb,
such as car, neon light, electric
blower etc.

1.TV signal is reflected by valley
or building.

2.Toward direction of antenna
cable is incorrect.

1.Color saturation is too low.

2.Color system is incorrect .

1.Volume setting is too low.

2.Sound is muted.

3.Sound system is incorrect.

is loose

22

1.Check the antenna cable connector plug whether or
not loose, cable whether or not perfect.

2.Refer to channel setting method, resetting aga in .

3.Check antenna cable type(VHF/UHF)

4.Adjust direction or position of antenna cable .

5.Attempt to use signal amplifier.

1.Check power cord whether or not connect well.

2.Check if " " on the panel is on.

Don't use electric blower around machine, adjust
antenna cable direction to reduce disturb.

1.Use high directional antenna cable. Use Fine
Tune of "TV".

2.Adjust toward direction of antenna cable.

"PICTURE"

1.Enter to add up color saturation.

2.Enter "TV" to change color system.

1.Adjust volume to proper value.

2.Press "MUTE" button on remote control to
eliminate mute.

3.Enter "TV" to change sound system.

Solu tion

Symp tom

Computer no display, and
prompt no signal input, red
indicator LED twinkling.

Remote control distance is
short, lose control.

Computer display faintly.

Computer display image
excursion, not full screen,
over screen.

Noise Signals at turning off.

Can not operate this
machine.

Fact or

Signal cable is loose or fall off .

1.Receive window of remote
continue was covered by
objects.

2.The battery energy of remote
control is to low.

1.Adjustment is incorrect.

2.Display mode is incorrect.

1.Adjustment is incorrect.

2.Display mode is incorrect.

Electrical release at turning off .

Exterior influence, for example
lightning, static electricity and so
on, which are possibly to disturb
the normal operation of this
machine.

Check signal cable whether or not loose, fall off ,
reconnect well again.

1.Remove objects, avoiding cover the receive
window of remote control.

2.Change battery.

1.Use auto-adjustment function.

2.Use commend mode.

1.Use auto-adjustment function.

2.Enter "GEOMETRY" t o ad ju st h or iz on ta l or
vertical position.

3.Use recommended mode.

It is normal.

Press " " button to turn off el ec tr ic al s ou rc e,
then press " " button to turn on the TV a ga in
after 1-2 minutes.

Solu tion

CAUTION: Don 't l et y ou r ma ch in e di sp lay the same picture for a long time, please set up a scr ee n pr ot ec ti on
procedur e. I f a hi gh c on tr as t pi ct ur e remains for along time, this picture will bring a ' le av e sh ad ow ' in s cr ee n.
Usually th e 'l ea ve s ha do w' w il l di sappear gradually when you turn off the machine power. However, this trou bl e
can't be rep ai re d, W hi ch i sn 't i n ra ng e of warranty.

23