Haier LCD-42K40A-HD, LCD-32K40A, LCD-32K40, LCD-42K40-HD User Manual

LCD TV

MODEL LCD-32K40
LCD-32K40A
LCD-42K40-HD
LCD-42K40A-HD

Owner’s Manual

LCD-K40.indd 1 1/21/2010 10:47:00 AM

IMPORTANT INFORMATION

If a television is not positioned in a sufficiently stable location, it can be potentially

hazardous due to falling. Many injuries, particularly to children, can be avoided by

taking simple precautions such as:

● Using cabinets or stands recommended by the manufacturer of the television.

● Only using furniture that can safely support the television.

● Ensuring the television is not overhanging the edge of the supporting furniture.

● Not placing the television on tall furniture (for example, cupboards or

bookcases) without anchoring both the furniture and the television to a suitable

support.

● Not standing the televisions on cloth or other materials placed between the

television and supporting furniture.

● Educating children about the dangers of climbing on furniture to reach the

television or its controls.

2

LCD-K40.indd 2 1/21/2010 10:47:00 AM

TO THE OWNER

Before operating this LCD TV, read this manual thoroughly and operate the LCD TV properly.
This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables
you to manage those features and maintains it in better condition for a considerable time.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard,
or other accidents.
If your LCD TV seems to operate improperly, read this manual again, check operations and cable
connections and try the solutions in the “Troubleshooting” section on page 41 of this booklet. If the
problem still persists, contact the dealer where you purchased the LCD TV or the service center.

Safety Precaution

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

● Install the LCD TV in a proper position. If not, it may result in a fire

hazard.

● Provide appropriate space on the top, sides and rear of the LCD

TV cabinet for allowing air circulation and cooling the LCD TV.
Minimum clearance must be maintained. If the LCD TV is to be
built into a compartment or similarly enclosed, the minimum
distances must be maintained. Do not cover the ventilation slot on
the LCD TV. Heat build-up can reduce the service life of your LCD
TV, and can also be dangerous.

● If the LCD TV is not to be used for an extended time, unplug the

LCD TV from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

10 cm

SIDE and TOP

10 cm

10 cm

REAR

6 cm

Caution In Installing

● Handle the

carefully when installing it and do not drop.

LCD TV

● Locate set away from heat, excessive dust, and direct sunlight.

● For correct installation and mounting it is strongly recommended to use a trained, authorized dealer.

Failure to follow correct mounting procedures could result in damage to the equipment or injury to the
installer.

NOTE :

When LCD TV is not used for a long period of time, unlighted dots may be observed. This is caused by
characteristic of the LCD TV. If this occurs, turn the LCD TV on and leave it on about 1 hour. These dots
will gradually disappear.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.

BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
OWNER'S MANUAL WITH THIS UNIT.

3

LCD-K40.indd 3 1/21/2010 10:47:00 AM

SAFETY INSTRUCTIONS

All the safety and operating instructions should be
read before the product is operated.

Read all of the instructions given here and retain
them for later use. Unplug this LCD TV from AC
power supply before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the
LCD TV.

For added protection to the LCD TV during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet. This will prevent damage due to
lightning and power line surges.

Do not expose this unit to rain or use near water...
for example, in a wet basement, near a swimming
pool, etc...

Do not use attachments not recommended by the
manufacturer as they may cause hazards.

Do not place this LCD TV on an unstable cart,
stand, or table. The LCD TV may fall, causing
serious injury to a child or adult, and serious
damage to the LCD TV. Use only with a cart or
stand recommended by the manufacturer, or sold
with the LCD TV. Wall or shelf mounting should
follow the manufacturer's instructions, and should
use a mounting kit approved by the manufacturers.

An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.

Slots and openings in the back and bottom of
the cabinet are provided for ventilation, to insure
reliable operation of the equipment and to protect it
from overheating.

The openings should never be covered with cloth
or other materials, and the bottom opening should
not be blocked by placing the LCD TV on a rug, or
other similar surface. This LCD TV should never be
placed near or over a radiator or heat register.

This LCD TV should not be placed in a built-in
installation such as a book case unless proper
ventilation is provided.

Never push objects of any kind into this LCD TV
through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind
on the LCD TV.

Do not place items such as vases containing liquid
on top of the LCD TV.

Do not install the LCD TV near the ventilation duct
of air-conditioning equipment.

This LCD TV should be operated only from the type
of power source indicated on the marking label.
If you are not sure of the type of power supplied,
consult your authorized dealer or local power
company.

Do not overload wall outlets and extension cords as
this can result in fire or electric shock. Do not allow
anything to rest on the power cord. Do not locate
this LCD TV where the cord may be damaged by
persons walking on it.

Do not attempt to service this LCD TV yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.

Unplug this LCD TV from wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power cord or plug is damaged or
frayed.
b. If liquid has been spilled into the LCD TV.
c.

If the LCD TV has been exposed to rain or water.

d.

If the LCD TV does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as improper adjustment of other
controls may result in damage and will often

require extensive work by a qualified technician
to restore the LCD TV to normal operation.
e. If the LCD TV has been dropped or the cabinet
has been damaged.
f. When the LCD TV exhibits a distinct change in
performance-this indicates a need for service.

When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
injury to persons.

Upon completion of any service or repairs to this
LCD TV, ask the service technician to perform
routine safety checks to determine that the LCD TV
is in safe operating condition.

4

LCD-K40.indd 4 1/21/2010 10:47:00 AM

TABLE

FEATURE AND DESIGN........................................6

PREPARATION........................................7

PART NAMES AND FUNCTIONS 7-8

CONNECTING LCD TV......................9

INSTALLING STAND 9

CONNECTING AC POWER CORD 9

CONNECTING OUTDOOR AERIAL 10

CONNECTING A COMPUTER 10

CONNECTING VIDEO EQUIPMENT 11

BEFORE OPERATION..........................12

OPERATION OF REMOTE CONTROL 12

OPERATION RANGE 13

REMOTE CONTROL BATTERIES

INSTALLATION 13

ON-SCREEN MENU 14-16

BASIC OPERATION..............................17

TURNING ON/OFF LCD TV 17

PLUG & PLAY

SELECTING INPUT SOURCE 18

CHANNEL RECALL 18

CHANNEL SELECTION 18

INFO 19

VOLUME CONTROL 19

MUTE 19

ECO 19

STEREO/MONO 19

BASS EXPANDER 19

SURROUND 19

SOUND MODE 20

PICTURE MODE 20

STILL 20

WIDE 21

SPORTS MODE 22

OFF TIMER 22

GAME MODE 23

PIP/POP OPERATION 24-25

XACTI LINK 26

USB 27

OPERATION OF REMOTE CONTROL

(IN TEXT MODE) 28

TEXT / TV 29

TEXT REVEAL 29

TEXT CANCEL 29

TEXT INDEX 29

TEXT SUBCODE 29

TEXT SIZE 30

TEXT HOLD 30

17

TEXT RED 30

TEXT GREEN 30

TEXT YELLOW 30

TEXT BLUE 30

MENU OPERATION(TV/AV/HDMI MODE).............31

CHANNEL 31-32

PICTURE

SOUND 34

TIMER 35

OSD 36

SETUP 37-38

MENU OPERATION(PC MODE)...................39

PICTURE 39

SOUND 40

TIMER 40

OSD 40

SETUP 41

DEALER MODE 42-43

APPENDIX.........................................................44

CLEANING LCD TV 44

FUNCTION OF PRODUCT SAFETY FEATURE

TROUBLE SHOOTING 45

TECHNICAL SPECIFICATIONS 46

CONFIGURATION OF VGA TERMINAL 47

MAC ADAPTER (Not Supplied) 47

SIGNAL MODE COLUMN (Recommended) 47

UNINSTALLING STAND BASE 49-51

33

is registered trademarks of

HDMI Licensing, LLC.

TRADEMARKS

● Apple, Macintosh, and PowerBook are trademarks
or registered trademarks of Apple Computer,Inc.

● IBM and PS/2 are trademarks or registered
trademarks of International Business Machines,
Inc.

● Each name of corporations or products in the
owner's manual is a trademark or a registered
trademark of its respective corporation.

44

5

LCD-K40.indd 5 1/21/2010 10:47:01 AM

Feature and Design

Picture

●

High Definition LCD Panel

 LCD-32K40/A
1366 x 768 pixel HD LCD Panel with high
contrast ratio and wide viewing angle.

 LCD-42K40/A-HD
1920 x 1080 pixel Full HD LCD Panel

makes perfect reproduction of 1080p/1080i
HD contents in pixel-to-pixel.
This LCD panel also provide high contrast
ratio and wide viewing angle.

●

VIZON Engine

VIZON Engine, SANYO High Quality Image
Processing Technology reproduces clear,
dynamic, natural and realistic picture along
with HD LCD Panel Technology.

● Dynamic AI

The AI (Automatic Image Control) circuit
compensates picture contrast and brightness
level dynamically and reproduces bright and
high-contrast picture. (see page 37)

¡ Sound

● NICAM/A2 Stereo

It's the Stereo Sound PAL Color TV Broadcasting
System upgrading mono-sound TV service to
stereo or dual-language sound. (see page 19)

● Bass Expander

Bass Expander reinforces bass effect to improve
overall sound quality. (see pages 19, 34).

Feature

● Sports Mode

Just by pressing the button, sport mode
optimizes picture and sound settings suitable
for each sport program. (see page 22)

 OFF

Normal setting.

 Football

Use to watch football program, golf program

or etc.

 Winter Sports

Suitable setting for Skiing

 Marine Sports

Suitable setting for Swimming, Diving

program of etc.

 Indoor Sports

Suitable setting for Basketball, Badminton
progarm of etc.

● PIP/POP (1 tuner)

Picture in picture displays two separate source
(e.g., HDMI and Video) at the same time.
(see pages 24-25)

6

program of etc.

● ECO Sensor

● GAME Mode

● SHOP Mode

¡ Compatibilty

● Full Multi System

● HD-Ready

● HDMI

● PC Input

● Xacti Link

● Terminals

Others

● Wall Mounting

● Light Commercial Mode

Ambient light sensor automatically adjusts
picture brightness to provide more relaxing
view for your eyes. (see pages 19, 37)

Game mode will reduce time lug of LCD-TV
to display picture from game console. (see
page 23)

Picture mode will be Dynamic and ECO mode
will be OFF in SHOP

PAL, SECAM, NTSC, NTSC 4.43 system can
be connected. (see page 19)

1080p, 1080i, 720, High Definition signals
are receivable.

HDMI provides complete transmission of digital
image and sound signals without any quality
deterioration.
DVI can be connected to HDMI. (see page 10)

Personal Computer/Laptop can be connected
with automatic resolution adjustment.
(see page 10)

The HDMI-CEC function will operate correctly
only when the Xacti is connected to a SANYO
TV that incorporates the HDMI-CEC function.
(see page 26)

HDMI for BluRay Player etc.
D-SUB 15-pin for PC input etc.
Component Video for DVD
S-Video/Video for VCR/DVD

It's designed for VESA Standard wall hanging
bracket.

By entering Dealer mode, Volume Lock,
Tuning Lock, Start Mode, OSD, RC, AC
Power Mode, Start Volume Level, Music
Mode and Reset can be selected.
Convenient for placing in Hotel, Hospital,
School, Store, Bank etc. (see page 43)

MODE. (see page 38)

LCD-K40.indd 6 1/21/2010 10:47:01 AM

PREPARATION

PART NAMES AND FUNCTIONS

FRONT

Side Control

INDICATORS

Power Indicator

ECO Sensor

Timer Indicator

Panel

Indicators

Infrared Remote Receiver

CARE FOR USING LCD TV

●

Do not bump or scratch the panel surface as this causes flaws on the surface of the

screen.

●

There may be some tiny black points and/or blight points on the SCREEN. These

points are normal.

7

LCD-K40.indd 7 1/21/2010 10:47:01 AM

PREPARATION

SIDE CONTROLS

Open or close the On-Screen Menu.

Used to turn the LCD TV on or off.

Connect video and audio outputs
from video equipment.

MENU button

POWER ON/OFF button

HDMI 3 Input Terminal

(Each button on the control panel has the same function with its counterpart on the
remote control. )

CHANNEL UP/DOWN (▲▼) buttons

-Used to Change channels.

-Used to select items on On-Screen
Menu.

VOLUME (+/-) buttons

-Used to adjust the volume.
Used to adjust the value of the selected

­item on On-Screen Menu.

-Used to execute the selected item on

On-Screen Menu.

INPUT MODE button

-Used to select input source: TV/AV1/

OK

AV2(S-VIDEO)/AV3(DVD)/HDMI1/
HDMI2/HDMI3/HDMI4/PC/USB.

-Used to confirm the selected item on

On-Screen Menu.

Note:

HDMI4 is only for model LCD-42K40/A-HD.

USB Terminal

AV2 Terminal

Headphone Jack

Connect a headphone (stereo) to this
jack. When this jack is used, speaker
sound will be lost.

Connect video and audio outputs from
video equipment.

● Video (RCA type)

● Audio L and R (RCA type)

● S-Video (mini DIN 4 type)

PS

8

LCD-K40.indd 8 1/21/2010 10:47:02 AM

CONNECTING LCD TV

INSTALLING STAND

Please according to the following procedure to install
stand.

Be careful of the panel. Suggest to put down the

1

panel side on the cushion or other soft material
before installing the stand.

To align the corresponding pilot holes and fix the

2

stand by screws.
Screws B for LCD-32K40/A: 4 pcs
Screws A for LCD-42K40/A-HD: 2 pcs
Screws B for LCD-42K40/A-HD: 4 pcs

Installing of stand is completed.

3

A

B

Note:

Screws A are just for LCD-42K40/A-HD.

B

CONNECTING AC POWER CORD

This LCD TV uses nominal input voltages of 110-240V
AC. This LCD TV automatically selects the correct
input voltage. It is designed to work with single­phase power systems. To reduce risk of electrical
shock, do not plug into any other type of power
system. Consult your authorized dealer or service
station if you are not sure of the type of power being
supplied.
Connect the LCD TV with all peripheral equipment
before turning the LCD TV on.

CAUTION

For safety, unplug AC power cord when the LCD
TV is not in use.

AC POWER CORD

To the AC Outlet (110 - 240V AC).
AC power cord out from the LCD TV.
AC outlet must be near this equipment and
must be easily accessible.

Pulls the

The

9

LCD-K40.indd 9 1/21/2010 10:47:07 AM

CONNECTING LCD TV

CONNECTING OUTDOOR AERIAL

Cable used for connection (This cable
is not supplied with this LCD TV.)

●

Aerial Cable

NOTE:
For all aerial circuit problems, please
consult your local dealer.

CONNECTING A COMPUTER

Cables used for connection (These cables are not
supplied with this LCD TV.)

● PC/VGA Cable (D-SUB 15pin)

● HDMI Cable: HDMI Input

● MAC Adapter (in the case of connecting Macintosh

computer)

●

Audio Cable [Mini Plug (L/R)]

IBM-compatible
computers
or Macintosh
computers
(VGA / SVGA /
XGA )

Audio Output

Desktop

type

(stereo)

Outdoor Aerial

HDMI Output

Aerial Cable

Laptop

type

NOTE:

When connecting the cables, AC Power Cords
of both LCD TV and external equipment should
be disconnected from AC outlet. Turn LCD
TV and peripheral equipment on before your
computer is switched on.

Monitor

Output

MAC
Adapter

Audio Input

(stereo)

AUDIO (DVI)
AUDIO

R-AUDIO-L

R-AUDIO-L

VIDEO

AV3 IN

10

LCD-K40.indd 10 1/21/2010 10:47:10 AM

HDMI1 IN

(DVI)

PR/CR PB/CB Y

R-AUDIO-L

HDMI Input

HDMI2 IN

PC IN

AV1 IN

VIDEO

(MONO)

HDMI4 IN

ANT.75

PC Input

Note:

●You can connect the DVI source to HDMI input
terminal by using the DVI to HDMI converter.

●HDMI4 is only for model LCD-42K40/A-HD.

CONNECTING LCD TV

CONNECTING VIDEO EQUIPMENT

Cables used for connection (These cables are not supplied with this LCD TV.)

● Video Cable(RCA X1), S-Video Cable, Audio Cable (RCA X2) : Video 1 or Video 2

● Video Cable(RCA X3), Audio Cable (RCA X2) : DVD (Component Video)

● Video Cable(RCA X1), Audio Cable (RCA X2) : Monitor Output

● HDMI Cable: HDMI Input

NOTE : When connecting the cable, AC Power Cords
of both LCD TV and external equipment should
be disconnected from AC outlet.

Component Video Source

DVD video equipment.
(such as DVD player or high-definition
TV source)

(example)

DVD Player

Digital AV Equipment

R/PR,CB/PB, Y

C

R L

Audio cable
(RCA X 2)

MONITOR OUT

Note:

Video (RCA) output is for
TV, AV or S-VIDEO only.

DVD

(RCA X 3)

Composite Video

and Audio Output

External

monitor

AV3 I N

Audio cable
(RCA x 2)

External Audio

R-AUDIO-L

Audio
Speaker
(stereo)

Equipment

R-AUDIO-L

VIDEO

Amplifier

HDMI cable
(RCA x1)

HDMI1 IN

(DVI)

AUDIO (DVI)

AUDIO

PR/CR---PB/CB Y

Video cable
(RCA x1)

Audio

HDMI2 IN

PC IN

AV1 IN

R-AUDIO-L

(MONO)

VIDEO

R , L , V

Video and Audio
cable (RCA x 3)

Video Source (example)

Video Cassette
Recorder

HDMI cable
(RCA x1)

HDMI4 IN

ANT.75

Video Disc
Player

HDMI cable
(RCA x1)

Note:

HDMI4 is only for model LCD-42K40/A-HD.

LCD-K40.indd 11 1/21/2010 10:47:10 AM

11

BEFORE OPERATION

OPERATION OF REMOTE CONTROL

POWER ON/OFF button

INFO button

STILL button

INPUT button

MUTE button

SPORTS button

STEREO/MONO button

ECO button

NUMERIC buttons

DIGIT button

POINT ▲/

▼/◄

VOLUME ( - ) button

VOLUME ( + ) button

Xacti button

TXT/TV button

RED button

GREEN button

GAME button

WIDE button

PIP button

POP button

/►buttons

TIMER button

MENU button

BACK button

CHANNEL RECALL button

OK button

CHANNEL UP (▲) button

CHANNEL DOWN (▼) button

PICTURE button

SOUND button

BLUE button

YELLOW button

BASS button

SURROUND button

P-INPUT button

P-SWAP button

Note:
In different mode, some buttons have different functions. (For details, please refer to page 28.)

12

LCD-K40.indd 12 1/21/2010 10:47:11 AM

BEFORE OPERATION

OPERATION RANGE

Point Remote Control toward LCD TV (Infrared
Remote Receiver) whenever pressing the
buttons. Maximum operating range for Remote
Control is about 16.4’ (5m) in front, about 30° to
the left or the right, about 15° for up or down.

REMOTE CONTROL BATTERIES INSTALLATION

Infrared Remote Receiver

15

15

30

30

5m

Remove the battery compartment

1 2

cover .

Close the battery compartment

3

cover.

To insure safe operation, please observe the following precautions:

Use (2) AAA, alkaline batteries.

●

Replace two batteries at the same time.

●

Do not use a new battery with a used battery.

●

Avoid contacting with water or liquid.

●

Do not expose the Remote Control to moisture, or heat.

●

Do not drop the Remote Control.

●

If a battery has leaked on the Remote Control, carefully wipe case clean

●

and install new batteries.

Risk of explosion if battery is replaced by an incorrect type.

●

Dispose of used batteries according to the instructions.

●

●

Do not expose batteries (battery pack or batteries installed) to excessive heat such as

sunshine, fire or the like.

Insert two size AAA batteries (1.5V)
according to "+" and "-" polarity markings
inside the battery compartment.

13

LCD-K40.indd 13 1/21/2010 10:47:11 AM

BEFORE OPERATION

ON-SCREEN MENU

TV/AV/HDMI MODE MENU LIST

MAIN MENU (CHANNEL MENU)

CHANNEL

AUTO SEARCH
SEMI-AUTO SEARCH

MANUAL SEARCH

COLOUR SYSTEM

SOUND SYSTEM

SKIP
CHANNEL SWAP

::

SELECT

ADJUST

CHANNEL MENU

AUTO SEARCH
SEMI-AUTO SEARCH

MANUAL SEARCH

COLOUR SYSTEM

SOUND SYSTEM

SKIP
CHANNEL SWAP

::

SELECT

PICTURE MENU

PICTURE MODE

CONTRAST

BRIGHTNESS
COLOUR

TINT

SHARPNESS

COLOUR TONE
3D NR
MPEG NR
FILM MODE

::

SELECT

CHANNEL

ADJUST

PICTURE

ADJUST

AUTO

B/G

OFF

:

BACK EXIT

AUTO

B/G

OFF

:

BACK EXIT

STANDARD

NORMAL

MID
HIGH
OFF

:

BACK EXIT

:

AUTO SEARCH

SEMI-AUTO SEARCH

MANUAL SEARCH

COLOUR SYSTEM

SOUND SYSTEM

SKIP

CHANNEL SWAP

:

:

::

PICTURE MODE

CONTRAST

BRIGHTNESS
COLOUR

TINT

SHARPNESS

COLOUR TONE
3D NR
MPEG NR
FILM MODE

::

SELECT

SELECT

Note:

● "CHANNEL" menu doesn't work in AV3(DVD), HDMI
mode and PC mode.

●

In AV1 and AV2(S-VIDEO) mode, only "COLOUR

SYSTEM" in "CHANNEL"

"TINT" cannot be selected except for NTSC/ NTSC4.43

●
system.

menu can be selected

● 3D NR will prohibited during 1080p mode.

AUTO SEARCHING, PLEASE WAIT…

55.25 MHZ CH 2

EXIT

SEMI-AUTO SEARCHING

CHANNEL 15

SEARCH

::

SELECT

ADJUST

CHANNEL

ADJUST

PICTURE

ADJUST

AUTO

B/G

OFF

:

BACK EXIT

STANDARD

NORMAL

MID

HIGH

OFF

:

BACK EXIT

:

:

MANUAL SEARCH

CHANNEL 15

SEARCH

::

SELECT

ADJUST

CHANNEL SWAP

CURRENT CHANNEL

TARGET CHANNEL

SWAPPING

::

SELECT

ADJUST

CHANNEL

OK

BACK

:

BACK

:

STORE

:

BACK EXIT

.

55.25 MHZ

55.25 MHZ

:

BACK

12

16

:

SOUND MENU

SOUND MODE

EQUALIZER

BALANCE
SURROUND
BASS EXPANDER

AUTO VOLUME

SOUND

::

SELECT

ADJUST

STANDARD

OFF
OFF

OFF

:

BACK EXIT

SOUND MODE

EQUALIZER

BALANCE
SURROUND
BASS EXPANDER

AUTO VOLUME

:

SOUND

::

SELECT

ADJUST

STANDARD

OFF
OFF

OFF

:

BACK EXIT

SOUND

EQUALIZER

120 Hz

500 Hz

1.5K Hz

5K Hz

:

10K Hz

::

SELECT

ADJUST

:

BACK EXIT

:

14

LCD-K40.indd 14 1/21/2010 10:47:12 AM

BEFORE OPERATION

ON-SCREEN MENU

TV/AV/HDMI MODE MENU LIST

MAIN MENU (CHANNEL MENU)

CHANNEL

AUTO SEARCH
SEMI-AUTO SEARCH

MANUAL SEARCH

COLOUR SYSTEM

SOUND SYSTEM

SKIP
CHANNEL SWAP

::

SELECT

ADJUST

TIMER MENU

OFF TIMER

ON TIMER - - : - -

ON TIMER CH

::

SELECT

OSD MENU

LANGUAGE

H - POSITION

V - POSITION

DURATION

TRANSPARENCY

TEXT LANGUAGE
INPUT LABEL

::

SELECT

SETUP MENU

CHILD LOCK
ECO
DYNAMIC AI
ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

ADJUST

ADJUST

ADJUST

:

BACK EXIT

TIMER

OSD

SETUP

AUTO

B/G

OFF

:

OFF

16

:

BACK EXIT

ENGLISH

5 SEC

WESTERN

:

BACK EXIT

ON

SENSOR

ON

ON

OFF

HDMI1

:

BACK EXIT

OFF TIMER

ON TIMER - - : - -

ON TIMER CH

:

:

:

::

LANGUAGE

H - POSITION

V - POSITION

DURATION

TRANSPARENCY

TEXT LANGUAGE
INPUT LABEL

::

CHILD LOCK

ECO
DYNAMIC AI
ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

SELECT

SELECT

ADJUST

ADJUST

ADJUST

TIMER

OSD

SETUP

Note:

● HDMI4 is only for model LCD-42K40/A-HD.

●

"PC ADJUST" is only active in PC mode.

OFF

16

:

:

BACK EXIT

ENGLISH

5 SEC

WESTERN

:

BACK EXIT

ON

SENSOR

ON
ON

OFF

HDMI1

:

BACK EXIT

:

XACTI LINK

XACTI POWER ON

XACTI POWER OFF

:

INPUT LABEL

AV1

AV2- S

AV3

HDMI1

HDMI2

HDMI3
HDMI4

::

SELECT

ADJUST

OSD

SETUP

HDMI LINK

OFF

DVD
OFF

HD

OFF

OFF
OFF

:

BACK EXIT

ON

OFF

ON

:

::

SELECT

ADJUST

:

BACK EXIT

:

PLEASE SELECT AND PRESS OK BUTTON

HOME MODE SHOP MODE

: SELECT

: ENTER

OK

15

LCD-K40.indd 15 1/21/2010 10:47:13 AM

BEFORE OPERATION

ON-SCREEN MENU

PC MODE MENU LIST

MAIN MENU (PICTURE MENU)

PICTURE MODE

CONTRAST

BRIGHTNESS
COLOUR TONE

COLOUR - R
COLOUR - G
COLOUR - B

PICTURE

::

SELECT

ADJUST

:

BACK EXIT

PICTURE MENU

PICTURE

PICTURE MODE

CONTRAST

BRIGHTNESS
COLOUR TONE

COLOUR - R
COLOUR - G
COLOUR - B

::

SELECT

ADJUST

SETUP MENU

CHILD LOCK

ECO
DYNAMIC AI
ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK
PC ADJUST
SHOP MODE

::

SELECT

SETUP

ADJUST

STANDARD

NORMAL

:

:

:

STANDARD

NORMAL

:

BACK EXIT

ON

SENSOR

ON
ON

OFF

HDMI1

:

BACK EXIT

PICTURE MODE

CONTRAST

BRIGHTNESS
COLOUR TONE

COLOUR - R
COLOUR - G
COLOUR - B

CHILD LOCK
ECO
DYNAMIC AI
ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK

PC ADJUST

SHOP MODE

PICTURE

::

SELECT

ADJUST

SETUP

::

SELECT

ADJUST

STANDARD

NORMAL

:

BACK EXIT

ON

SENSOR

ON
ON

OFF

HDMI1

:

BACK EXIT

:

SETUP

HDMI LINK

SETUP

PC ADJUST

ON

OFF

ON

:

BACK EXIT

ON

:

XACTI LINK

XACTI POWER ON

XACTI POWER OFF

::

SELECT

ADJUST

AUTO ADJUST

H - POSITION

V - POSITION

:

PHASE

CLOCK

AUTO SHUT DOWN

::

SELECT

ADJUST

:

BACK EXIT

:

PLEASE SELECT AND PRESS OK BUTTON

HOME MODE SHOP MODE

: SELECT

: ENTER

OK

Note:

● "CHANNEL" menu is actived in TV, AV1 or AV2(S-VIDEO) mode.

● "PC ADJUST" is only active in PC mode.

● SOUND/ TIMER/ OSD menu in PC mode is the same as TV/AV/HDMI mode, please refer to

pages 14~15.

16

LCD-K40.indd 16 1/21/2010 10:47:13 AM

BASIC OPERATION

TURNING ON / OFF LCD TV

Complete the peripheral connections before turning on LCD

1

TV. (Please refer to "CONNECTING LCD TV".)

Connect LCD TV's AC Power Cord into an AC outlet.

2

Press POWER ON/OFF button on Side Controls of LCD TV

3

or on Remote Control to turn it ON. The POWER indicator
will light up (green). Press POWER ON/OFF button again
to shift it to stand-by status, the POWER indicator will
become red.

SIDE CONTROLS

OK

NO SIGNAL SHUT OFF

This TV set incorporates the NO SIGNAL SHUT OFF function.
If no signal is input in TV mode, "OFF 00:10" will display for
about 10 minutes and TV will be turned off automatically.

PLUG & PLAY

By PLUG & PLAY, when the TV set is powered on for the first time,
will automatically search and preset all the receivable TV programs.

Plug the power, connect the antenna, and press Main Power

1

ON/OFF button, the TV set will automatically search the
programs.

After programs searching, SHOP MODE menu will appear.

2

Press POINT ◄► buttons to select and press OK button
for SHOP MODE or HOME MODE. Then the pop up menu
disappears. For the details, please refer to "SHOP MODE"
on page 38.

Auto searching completed and message "AUTO SET-UP

3

COMPLETED HAPPY VIEWING!" appears. About 5 seconds
later, the TV set will automatically return to programme
position “1”.

Note:

Message "NO STATION PLEASE CONNECT ANTENNA PLUG!"

●

will appear if there is no TV stations are searched after
automatically programs searching.(see Figure A.) Then
SHOP MODE menu appears, the same operations as step 2
above will be excuted and returns to normal TV picture.

● Press MENU button while searching programs, message
"PLEASE SELECT AND PRESS OK BUTTON" appears
(see Figure B), press POINT

◄► buttons to select

"TEMPORAL CANCEL" or "PERMANENT CANCEL".

-

"TEMPORAL CANCEL" to cancel temporary PLUG & PLAY
function. The

PLUG & PLAY

function

is actived only in TV

mode while turning on the LCD TV.

- "PERMANENT CANCEL" to cancel permanetly PLUG &

PLAY function. When turn on television the PLUG & PLAY

is not actived.

Press OK button to enter SHOP MODE menu. the same

operations as step 2 above will be excuted and returns to
normal TV picture.

it

POWER ON/ OFF button

REMOTE CONTROL

I AM SEARCHING ALL PROGRAMMES
PLEASE WAIT!

PLEASE SELECT AND PRESS OK BUTTON

HOME MODE SHOP MODE

: SELECT

OK

AUTO SET-UP COMPLETED
HAPPY VIEWING!

Figure A.

NO STATION
PLEASE CONNECT ANTENNA PLUG!

Figure B.

PLEASE SELECT AND PRESS OK BUTTON

TEMPORAL CANCEL PERMANENT CANCEL

: SELECT

OK

POWER ON/
OFF button

: CANCEL

MENU

: ENTER

: ENTER

1

17

LCD-K40.indd 17 1/21/2010 10:47:14 AM

BASIC OPERATION

SELECTING INPUT SOURCE

Select mode "TV" , "AV1", "AV2-S", "AV3", "HDMI1", "HDMI2", "HDMI3", "HDMI4", "PC" or "USB"
by pressing INPUT button on Remote Control or on Side Controls, you can also press POINT ▲▼
buttons to select different mode. To enter the selected mode, press OK button or POINT ◄► buttons.

INPUT

TV

1. TV

AV1

2.

3.

AV2 -S

4. AV3

5. HDMI1

6. HDMI2

7. HDMI3

8. HDMI4

9. PC

0. USB

: SELECT : EXIT

0~9

Note:

●

It is possible to return to TV mode directly by pressing

CHANNEL UP/DOWN (▲▼) buttons from the AV mode, PC
mode or HDMI mode.

●

HDMI4 is only for model LCD-42K40/A-HD.

BACK

CHANNEL RECALL

Press CHANNEL RECALL button to switch between
the previous channel and the current channel.
For example, now you are watching channel "4", but
you watched channel "2" previously. If you press
CHANNEL RECALL button, channel "2" will appear
immediately.

SIDE CONTROLS

OK

INPUT button

REMOTE CONTROL

REMOTE CONTROL

INPUT button

CHANNEL
RECALL button

CHANNEL SELECTION

There are 256 channels can be selected on the LCD TV.

DIRECT SELECTION

For direct access to programmes using the (0-9) numeric buttons.

1) For selection of channel position 0 - 9. Example: For
channel position 8, press “8” button.

2)

For selection of channel position 10 - 99. Example:
For channel position 25, press the DIGIT
display "- -", then press “2” and “5” buttons.

For selection of channel position 100 - 199. Example:

3)
For channel position 125, press the DIGIT button

twice to display "1 - -", then press “2” and “5” buttons.

4) For selection of channel position 200 - 255.
Example: For channel position 225, press the DIGIT
button three times to display "2 - -", then press “2”
and “5” buttons.

button to

REMOTE CONTROL

NUMERIC buttons

DIGIT button

CHANNEL UP/
DOWN (▲▼)
buttons

CHANNEL UP/ DOWN

Press CHANNEL UP/DOWN (▲▼) buttons on Side Control or on Remote Control to select programs.

●

Press CHANNEL UP (▲) button to select next channel.

●

Press CHANNEL DOWN (▼) button to select previous channel.

18

LCD-K40.indd 18 1/21/2010 10:47:15 AM

BASIC OPERATION

INFO

Press INFO button on Remote Control to display the status of LCD TV. Press again to remove the display.

11

Channel

Colour System

Sound System
Stereo/Mono

AUTO

MONO

D/K

VOLUME CONTROL

To adjust the volume value desired by pressing VOLUME(+/-)
buttons on Remote Control or on Side Control. The volume
dialogue box will appear on the screen for a short while.
VOLUME(+) button to increase volume, and VOLUME(-)
button to decrease volume.

VOLUME

5

MUTE

Should you wish to mute the sound, press MUTE button.
To switch the sound back on, press MUTE button again
or press VOLUME(+/-) buttons on Side Control or on
Remote Control.

ECO

Press ECO button on Remote Control to set "ECO OFF",
"ECO ON" or "ECO SENSOR".

REMOTE CONTROL

REMOTE CONTROL

REMOTE CONTROL

REMOTE CONTROL

INFO button

VOLUME(+/-)
buttons

MUTE button

ECO button

STEREO/MONO

Simply press STEREO/MONO button to select the
following audio signals: "STEREO", "MONO", "NICAM",
"A" and "B".

Depend on each channel is received.

Note:

REMOTE CONTROL

STEREO/MONO
button

BASS EXPANDER

Press BASS button on Remote Control to set "BASS
EXPANDER OFF" or "BASS EXPANDER ON".

REMOTE CONTROL

BASS

button

SURROUND

Press SURROUND button on Remote Control to set
"SURROUND OFF" or "SURROUND ON".

REMOTE CONTROL

SURROUND
button

19

LCD-K40.indd 19 1/21/2010 10:47:16 AM

BASIC OPERATION

SOUND MODE

Select sound level by pressing SOUND button on Remote
Control.

STANDARD

Normal sound state preset on LCD TV.

NEWS

Select this mode for talk programs.

MUSIC

Select this mode for music programs.

PERSONAL

Select this mode for user to call out the preset sound
adjustment in SOUND menu.

PICTURE MODE

Select image level by pressing PICTURE button on
Remote Control.

DYNAMIC

Bright and dynamic picture. It is suitable for nice
playback, such as DVD program.

STANDARD

Natural and splendid picture level preset on this LCD TV.

VIVID

Present colourful and lively picture level.

SOFT

Inhibit strong contrast and color, it is beneficial for eye
protection.

PERSONAL

User presets picture adjustment in PICTURE MODE.

Note:

Press ECO button on Remote Control to select "ECO ON" or "ECO SENSOR". While in ECO status, press PICTURE
button to choose any of options of "ECO/STANDARD", "ECO/VIVID", "ECO/SOFT", "ECO/PERSONAL" and "ECO/
DYNAMIC".

REMOTE CONTROL

STANDARD

NEWS

MUSIC

PERSONAL

REMOTE CONTROL

DYNAMIC

STANDARD

VIVID

SOFT

PERSONAL

SOUND button

PICTURE
button

STILL

Press STILL button to switch the "Still" function On or Off.
When in PIP/POP mode, "Still" function can still main
picture.

To cancel "Still" function:
Press STILL button, PIP button, POP button or MENU
button to cancel the
source to cancel it also.

Note:

●

When the "Still" function is On, the picture will still, but the

sound will

● Still will prohibited during 1080p mode.

●

When the "Still" function is On, TIMER button doesn't work.

20

LCD-K40.indd 20 1/21/2010 10:47:17 AM

function, or you can switch

be

remain.

the input

REMOTE CONTROL

STILL button

STILL ON

WIDE

Select screen size among "FULL", "ZOOM", "ZOOM[CAPTION­IN]",

"NORMAL" and "NATURAL" by pressing WIDE

button on

* This function doesn't work in PIP/POP mode.
* This function doesn't work in TV/ AV/ DVD/ HDMI/ PC
modes when no signal is input.
* Only "FULL" mode can be selected when the input mode
is

* "FULL" and "NORMAL" can be selected in PC mode.
*

Remote Control.

"HDMI" or "DVD" and the input signal is 1080i, 720p or

1080p.

Teletext is ONLY operated on Full Picture mode.

BASIC OPERATION

REMOTE CONTROL

WIDE button

FULL

ZOOM

ZOOM[CAPTION-IN]

NORMAL

*

FULL

Provides image to fit width of screen by expanding image
width uniformly. This function can be used for enjoying a
squeezed video signal with wide video aspect ratio of 16 : 9
screen. When your video equipment (such as DVD) has 16 : 9
output mode, select 16 : 9 and select "Full" to provide better
quality.

ZOOM

Provides image to fit screen size (16 : 9 aspect ratio) by
expanding image width and height uniformly. This function
can be used for enjoying a letter box mode picture (4 : 3
aspect picture with black bar on top and bottom edges) with
wide video aspect of 16 : 9 screen.

ZOOM[CAPTION-IN]

Provides the image that is expanded as "ZOOM" mode and
moved

up to show more image to include captions. This
function can be used for enjoying a letter box picture with
captions.

NORMAL

Provides real 4 : 3 image on 16 : 9 screen.

NATURAL

Provides image to fit width of screen by expanding up/down/
left right of image. This function is suitable to enjoy a normal
video signal (4 : 3 aspect ratio) with wide video aspect ratio
of 16 : 9 screen.

NATURAL

21

LCD-K40.indd 21 1/21/2010 10:47:18 AM

BASIC OPERATION

SPORTS MODE

Select SPORTS mode "OFF", "FOOTBALL", "WINTER
SPORTS", "MARINE SPORTS" and "INDOOR SPORTS"
by pressing SPORTS button repeatly on Remote Control.

OFF

Turn off the sport mode to return to normal picture.

FOOTBALL

Use to watch football program, golf program or etc.

WINTER SPORTS

Use to watch skiing program or etc.

MARINE SPORTS

Use to watch swimming program, diving program or etc.

INDOOR SPORTS

Use to watch basketball program, badminton program or etc.

Note:
Press SOUND, SURROUND and BASS buttons in SPORTS mode, only current SPORTS mode is
displayed.

OFF TIMER

To set OFF TIMER by pressing TIMER button on Remote
Control. The timer dialogue box will appear on the screen
for a short while.
To select "OFF", "30 MIN", "60 MIN", "90 MIN" or "120 MIN"
with TIMER buttons.

REMOTE CONTROL

OFF

FOOTBALL

WINTER SPORTS

MARINE SPORTS

INDOOR SPORTS

REMOTE CONTROL

SPORTS
button

TIMER button

22

LCD-K40.indd 22 1/21/2010 10:47:18 AM

GAME MODE

Game mode will reduce time lug of LCD-TV to display picture
from game console.

Press GAME button to display OPTION menu.

1

Press POINT ◄► buttons to select "GAME MODE ON".

Press POINT ▲▼ buttons to select GAME INPUT SELECT,

2

then press POINT ◄► buttons to select AV1, AV2(S-VIDEO),
AV3(DVD), HDMI1, HDMI2, HDMI3, HDMI4 or PC mode.
Press BACK button to return to the previous menu.

You can select the GAME INPUT by pressing GAME button

3

once or pressing INPUT button repeatedly where GAME
appears. (For example: If you set AV1 as GAME INPUT, GAME
button or INPUT button switches input to AV1 as figure A.)

When you select the GAME INPUT (example: AV1) which is

4

set in GAME INPUT SELECT menu, the counter starts for
counting elapsed time. When 30min, 60min, 90min, 120min,
150min and 180 min is elapsed, the time will be displayed as
shown in the figure B. Over 180 min will not have time display.

Note:
Counter for the GAME INPUT will be reset when the power
is turned off / stand-by and input change.

To exit GAME MODE, select "GAME MODE OFF" in SETUP

5

menu.

Please pay more attention to following points when GAME MODE
is ON.

●

While watching the input for the game mode, press INFO button

to display the counting elapsed time. (see Figure C.)

● You can select picture menu and audio menu.

● You can adjust colour, contrast, brightness, sharpness and

tint but you cannot adjust other items related to picture
improvement.

SPORTS MODE / STILL / TELETEXT/ PIP/POP will be disabled.

●

●

Picture size shall be fixed to FULL, WIDE button will be disabled.

● HDMI4 is only for model LCD-42K40/A-HD.

BASIC OPERATION

REMOTE CONTROL

GAME
button

SETUP

SETUP

ON
ON

SENSOR

ON

ON

OFF

HDMI1

:

BACK EXIT

ON
ON

SENSOR

ON
ON

ON

HDMI1

:

BACK EXIT

AV1

AUTO
GAME

:

:

CHILD LOCK
AUTO SHUT OFF
ECO
DYNAMIC AI
ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

CHILD LOCK
AUTO SHUT OFF
ECO
DYNAMIC AI
ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

Figure A.

Figure B.

ADJUST

ADJUST

GAME 30min

Figure C.

AV1

AUTO
GAME

GAME 12min

23

LCD-K40.indd 23 1/21/2010 10:47:19 AM

BASIC OPERATION

PIP/POP OPERATION

Using PIP/POP function, you can enjoy a TV program and an
image such as HDMI input from a side terminal at the same
time.
Only the sound on the main picture is heard from the TV
speaker or the headphone jack. The sound on the sub-picture
cannot be heard.

Note:

● PIP/POP function only work in "FULL" mode.

● PIP/POP will prohibited during 1080p mode, warning message "OUT OF RANGE" will be displayed.

● When PIP/POP is ON, MENU has restriction as follows:

- SEARCH can not be selected in CHANNEL menu.

- PICTURE menu for Sub picture is not available.

- PC screen menu for Sub picture can not be selected when Sub picture has PC source.

REMOTE CONTROL

PIP button P-INPUT button

POP button

P-SWAP
button

PIP ON/OFF

Confirm the each screen size (TV, AV1, AV2-S, DVD, HDMI or PC) is “FULL” mode. PIP can be
set only in “Full” mode. For example, set the screen size of HDMI and TV to “Full” mode
respectively when you combine picture of HDMI with the picture of TV.

Press PIP button to display sub picture.

1

Each time PIP button is pressed, the location of sub picture is changed as follows.

2

During PIP mode, pressing the P-SWAP button will switch main and sub picture.

3

The sound on the main picture and the sub picture also changes at the same time.

Press P-INPUT button in PIP mode can switch input source in Sub picture. (Refer to this page

4

"PIP Combination".)

Press BACK or POWER ON/OFF buttons to exit PIP mode.

5

Sub Picture

Main Picture

(PIP OFF)

Switching of the Main picture and Sub picture

During PIP mode, pressing the P-SWAP button will switch main and sub picture.
The sound on the main picture and the sub picture also changes at the same time.

Note:
PIP mode can be cancelled by BACK button except that On-Screen menu is being operated.

24

LCD-K40.indd 24 1/21/2010 10:47:20 AM

BASIC OPERATION

POP ON/OFF

Press POP button to display two pictures. The left picture is main picture, the right one is sub

1

picture.

During POP mode, press P-SWAP button to switch main and sub picture.

2

The sound on the main picture and the sub picture also changes at the same time.

Each time POP button is pressed, the location of sub picture is changed as follows.

3

Press any of POP, BACK or POWER ON/OFF buttons to exit POP mode.

4

Note:
POP mode can be cancelled by BACK button except that On-Screen menu is being operated.

Combination of the Main picture and Sub picture

The following combination (Main and Sub picture) in the PIP and POP mode, " " indicates that it is possible

for combination, and "X" indicates that it is impossible for combination.

MAIN

TV

SUB

TV

AV1

AV2(S-VIDEO)

AV3(DVD)

HDMI1

HDMI2

HDMI3

HDMI4

PC

Note:

HDMI4 is only for model LCD-42K40/A-HD.

AV1

(S-VIDEO)

X

X

X

X

X

X

AV2

X

X

X

AV3

(DVD)

X

X

X

X

X

X

HDMI1 HDMI2

XXXX

XXXX

X

X

X

XXXX

HDMI3

X

X

X

HDMI4

X

X

X

PC

X

X

X

X

X

X

X

X

X

25

LCD-K40.indd 25 1/21/2010 10:47:21 AM

BASIC OPERATION

XACTI LINK

This is a system control function by which, through an HDMI cable,
devices and the operation of multiple devices is coordinated.
correctly only when the
VPC-WH1

1

2

is connected to a SANYO TV that incorporates the

Select HDMI SETTING in SETUP menu. Then press
buttons to enter HDMI SETTING menu.
"XACTI LINK ON" by pressing ◄► buttons. (
for operation, please refer to "SETUP" on page 38.)

S

elect "

HDMI-CEC ON
( For the details, please refer to "TV OUTPUT SETTING
on the INSTRUCTIONS MANUAL(Xacti).)

Make sure that HDMI input is connected to Xacti if Xacti

3

button is pressed. (The connecting way, please
"Connecting to the HDMI terminal" on the INSTRUCTIONS
MANUAL(Xacti).) After connecting the Xacti to the
television, switch the TV input to the terminal which the
Xacti is connected.

Press Xacti button to enter DISPLAY mode.(Figure C.)

4

Press ▲▼ buttons to select any picture. Press OK button
to display selected picture. And you can operate the
selected picture by following buttons on Remote Control.
(Note: For the details, please refer to
MANUAL(Xacti).)

●RED(W) button:

toward the [W] side.

●GREEN(T) button:

toward the [T]side

●

YELLOW button:

●BLUE(MENU) button: Open or close the Xacti menu.

Press Xacti button or RED button to return to the DISPLAY

5

mode.

To exit Xacti mode, select

6

LINK menu. (
"SETUP" on page 38.)

Xacti whose model is VPC-HD1010, VPC-HD2000, VPC-FH1, VPC-TH1 or

(

" in Xacti menu as

Figure A.)

Figure B.

The

Select

details

refer to

INSTRUCTIONS

Works the same as pushing zoom switch

Works the same as pushing zoom switch

It operates as a preservation button to

the animation edit.

The details for operation, please refer to

"XACTI LINK OFF" in HDMI

a control signal is output to electronic

The HDMI-CEC function will operate

HDMI-CEC function.

◄►

REMOTE CONTROL

"

Figure A.

XACTI LINK

XACTI POWER ON

XACTI POWER OFF

SETUP

HDMI LINK

::

SELECT

Figure B.

ADJUST

OK button

POINT

▲/▼

ON

OFF

ON

:

BACK EXIT

/◄/►

:

buttons

Xacti button
RED(W) button

GREEN(T) button
BLUE(MENU) button

YELLOW button

Note:

When "XACTI POWER OFF" is set to "ON", the power supply

●

of Xacti will switch to off if you turn off the television.

When "XACTI POWER ON" is set to "ON", the power

●

supply of television will switch to on if you turn on the Xacti.

● The menu of Xacti will not open when open the television

menu.

● Message of

connect it." will display on the screen when in the Xacti

"Please switch Xacti to the PLAY mode and

OFF

Figure C.

REC mode.

●

Only SANYO Xacti camera with HDMI-CEC that corresponding

to this LCD TV (please refer to SANYO Xacti camera model

with HDMI-CEC on page 48)

.

26

LCD-K40.indd 26 1/21/2010 10:47:22 AM

BASIC OPERATION

USB

After Flash disk, Mobile Hard Disk or other USB devices are inserted the USB terminal, you can read photos.
The USB system only supports JPEG format.

Note:

● Do not pull in/out USB device frequently. If you pull out USB device when it is being played, maybe it would
result physical deterioration for USB device or LCD TV.

● If USB device cannot be read, please check if it is correctly connected and check your USB.

● Please switch to other modes when you find USB mode is abnormal, then restart USB mode again.

When USB device has been inserted the USB terminal, press INPUT button to enter INPUT menu, and press

1

SIDE CONTROLS

Note:

HDMI4 is only for model LCD-42K40/A-HD.

2

3

4

5

▲▼

POINT

buttons to select USB.

REMOTE CONTROL

INPUT
button

BACK
button

OK

OK button

POINT
▲/▼

/◄/►

USB Terminal

Press POINT ▲▼ buttons to select JPEG folder or any

Press POINT ► button to enter into JPEG folder

buttons

picture.

or any picture.

To begin AUTO PLAY, press OK button. During AUTO PLAY,
press POINT ▲▼ buttons to switch to the next or the previous
picture. Press OK button to play or pause the picture displaying.

Press BACK button to end picture viewing and to return to
previous level.

INPUT

1. TV

2.

AV1

3. AV2 -S

4. AV3

5. HDMI1

6. HDMI2

7. HDMI3

8. HDMI4

9. PC

0. USB

0. USB

: SELECT : EXIT

0~9

C : \

JPEG
PICTURE

JPG

001 . JPG

JPG

002 . JPG

JPG

003 . JPG

DIRECTORY

: SELECT

C : \

JPEG

MUSIC

JPG

001 . JPG

JPG

002 . JPG

JPG

003 . JPG

BACK

JPEG

: NEXT

JPEG

Note:
The system only supports JPEG Baseline format.

DIRECTORY

: SELECT

: NEXT

BACK

: BACK

Non-standard types of JPEG image files are not supported.

JPEG

C : \

....

JPG

001 . JPG

JPG

002 . JPG

JPG

003 . JPG

JPG

004 . JPG

PRESS RIGHT KEY TO SHOW IMAGE
WIDTH : 1024 HEIGHT : 768

2009 / 12 / 08 15 : 47 : 35 55KB

: SELECT

OK

: AUTO PLAY

BACK

: BACK

27

LCD-K40.indd 27 1/21/2010 10:47:23 AM

BASIC OPERATION

OPERATION OF REMOTE CONTROL (IN TEXT MODE)

POWER ON/OFF button

TEXT REVEAL button

TEXT HOLD button

NUMERIC buttons

TEXT SUBCODE button

VOLUME (-) button

VOLUME (+) button

TXT/TV button

TEXT RED button

TEXT GREEN button

MUTE button

TEXT CANCEL button

TEXT INDEX button

TEXT SIZE button

PAGE UP (▲) button

PAGE DOWN (▼) button

TEXT BLUE button

TEXT YELLOW button

Note:

● In different mode, some buttons have different functions. (For details, please refer to page 12.)

● Teletext is ONLY operated on Full Picture mode.

28

LCD-K40.indd 28 1/21/2010 10:47:24 AM

BASIC OPERATION

TEXT/ TV

Press TXT/TV button to select teletext. Press this button again will display:

■ TV mode: TV -> TEXT mode -> MIX mode -> TV

■ AV mode: AV -> TEXT mode -> MIX mode -> AV
Note:

■ TEXT mode: TEXT screen is displayed.

■ MIX mode: TV/AV (broadcast image) screen and the contents of TEXT(it superimposed) are

displayed simultaneously.

■ CANCEL mode: TEXT/MIX MODE is canceled temporarily and broadcast image is displayed.

However, the available key are the same as TEXT mode.

■ In the following state, the TXT/TV button is invalid.

■ RF non-signal (Auto shut off)

■ AV non-signal (Blue back)

■ When the TXT/TV button is pressed during the CANCEL mode, the CANCEL mode will be canceled,

and the TEXT screen is displayed.

TEXT REVEAL

■ Press REVEAL button to reveal hidden items on the text page.

Some pages such as quiz pages have the answers hidden. The REVEAL button may have to be held to

■
keep the answer on the screen, or press it again to remove the answer.

■ In REVEAL OFF, this indication is not given.

■ REVEAL button does not work except a text function. (The RECALL button usually operates.)

TEXT CANCEL

■

When pressing the TEXT CANCEL button in TEXT or MIX mode, the TV picture appears on the screen.

■ CANCEL mode will be canceled if the TEXT CANCEL button pressed once again.
CANCEL mode is also canceled by pressing the TXT/TV button.

■ In CANCEL mode, page number is always displayed on upper left of the screen.

TEXT INDEX

Press the INDEX button to select the teletext index page in TEXT, MIX, CANCEL mode.

TEXT SUBCODE

1 Press TEXT SUBCODE button, “110/. . . .” will be displayed (e.g. the current page is 110).

2 Press the NUMERIC buttons(0-9) to enter the sub page. For example, to select sub page 4,
press NUMERIC buttons 0-0-0-4, and "110/0004" will be displayed.

29

LCD-K40.indd 29 1/21/2010 10:47:24 AM

BASIC OPERATION

TEXT SIZE

Press TEXT SIZE button to enlarge the top half of the text page.
Press TEXT SIZE button again to enlarge the bottom half of the text page.
Press TEXT SIZE button again to return to the normal size page.

Normal -> top half enlargement -> bottom half enlargement -> normal

Note:

■ During the top half enlargement or the bottom half enlargement mode, if a page request is performed by
[0] - [9] button and the TEXT INDEX button, it will become the normal mode and a page will be requested.

If HOLD ON / OFF is performed during the top half enlargement mode, it will still at the top half enlargement

■
mode. (A HOLD symbol display )

■ If HOLD ON / OFF is performed during the bottom half enlargement mode, it will still at the bottom half
enlargement mode. (A HOLD symbol not display )

TEXT HOLD

Press TEXT HOLD button to stop page request and updating .

■ HOLD ON: The symbol
Update of TELETEXT is forbidden. It stops on the TEXT screen display now.

■ HOLD OFF: A status display will be page number display.

■ TELETEXT page data is updated.

■ The present page is re-requested. (header roll)

■ A screen is updated by reception of the UPDATE signal.

■ A screen is eliminated by reception of an ERASE signal.

■ TEXT HOLD button does not work except a text function.

will appear instead of the page number.

TEXT RED

The page of a red prompt is required. (also cancel mode)

TEXT GREEN

The page of a green prompt is required. (also cancel mode)

TEXT YELLOW

The page of a yellow prompt is required. (also cancel mode)

TEXT BLUE

The page of a blue prompt is required. (also cancel mode)

30

LCD-K40.indd 30 1/21/2010 10:47:24 AM

MENU OPERATION (TV/AV/HDMI mode)

CHANNEL

Press MENU button and the main menu will appear. Whenever

1

MAIN MENU is accessed initially, CHANNEL will be the default
selection.

Press POINT ▼ button to enter into CHANNEL menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to adjust the item.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

Note:

● "CHANNEL" doesn't work in HDMI mode, AV3(DVD) mode
and PC mode.

●

"COLOUR SYSTEM" in "CHANNEL" menu is only active in TV,

AV1 and AV2(S-VIDEO) mode.

●

The settings for "SOUND SYSTEM", "COLOUR SYSTEM" or "SKIP"

automatically memorized in the programme position.

are

CHANNEL MENU

AUTO SEARCH
SEMI-AUTO SEARCH

MANUAL SEARCH

COLOUR SYSTEM

SOUND SYSTEM

SKIP
CHANNEL SWAP

AUTO SEARCH

SEMI-AUTO SEARCH

MANUAL SEARCH

COLOUR SYSTEM

SOUND SYSTEM

SKIP

CHANNEL SWAP

CHANNEL

::

SELECT

ADJUST

CHANNEL

AUTO

B/G

OFF

:

BACK EXIT

AUTO

B/G

OFF

:

AUTO SEARCH

All receivable channels are automatically tuned in and memorized
in consecutive programme position.

● The Automatic Tuning operation can be cancelled at any time
by pressing BACK button or MENU button.

● After all receivable channels have been found and stored,
the TV set will automatically return to programme position “1”.

SEMI-AUTO SEARCH

Use to preset a receivable channel in any desired programme
position, e.g. the position with the same number as the channel.

Select channel “15”.

1

Enter into CHANNEL menu, press POINT ▲▼ buttons to

2

select "SEMI-AUTO SEARCH". Press POINT ◄► buttons
to enter into the SEMI-AUTO SEARCH menu.

Press POINT ▲▼ buttons to select "SEARCH". Press POINT

3

◄► buttons to start the channel searching.

Press POINT ► button and the tuning will go to the higher

4

frequencies. Press POINT ◄ button and the tuning will go to
the lower frequencies.
Use POINT ◄orPOINT ► button to search for required TV
station. Once a station is located, searching will automatically
stop. Continue till desired channel is located.

■ Press BACK button to return to the previous menu.

■ Press MENU button to exit menu operation.

::

SELECT

AUTO SEARCH MENU

AUTO SEARCHING, PLEASE WAIT…

55.25 MHZ CH 2

EXIT

SEMI-AUTO SEARCH MENU

SEMI-AUTO SEARCHING

CHANNEL 15

SEARCH

::

SELECT

SEMI-AUTO SEARCH

CHANNEL 15

SEARCH

::

SELECT

ADJUST

ADJUST

ADJUST

:

BACK EXIT

BACK

55.25 MHZ

:

BACK

55.25 MHZ

:

BACK

:

31

LCD-K40.indd 31 1/21/2010 10:47:25 AM

MENU OPERATION (TV/AV/HDMI mode)

MANUAL SEARCH

Manual search a channel if it cannot be automatically tuned, such
as when the signal is poor.

Select channel “15”.

1

Enter into CHANNEL menu, press POINT ▲▼ buttons to

2

select "MANUAL SEARCH". Press POINT ◄► buttons to
enter into the MANUAL SEARCH menu.

Press POINT ▲▼ buttons to select "SEARCH".

3

◄► buttons

Press and hold POINT ◄ or POINT ► button to search for

4

required TV station. Press OK button to save desirable station.

start the channel searching.

to

Press POINT

■ Press BACK button to return to the previous menu.

■ Press MENU button to exit menu operation.

COLOUR SYSTEM

The setting for colour system is only active in TV or AV mode.
Usually, the colour system is set to the position of "AUTO". In case
of abnormal colour, repeatedly press POINT ◄► buttons to select
"AUTO", "PAL", "SECAM", "NTSC" or "NTSC4.43" until the best
colour effect is reached.

SOUND SYSTEM

The setting for sound system is only active in TV mode.
Usually, the sound system is set to the position of "B/G". In case
of abnormal sound, repeatedly press POINT ◄► buttons to select
"I", "D/K", "M" or "B/G" until the best sound effect is reached.

SKIP

This feature is used to remove unwanted channels from the
channel scanning memory.
You can skip the unused or undesired channels when you are
selecting a channel using CHANNEL UP/DOWN (▲▼) buttons.
This function is only active in TV mode.

CHANNEL SWAP

To swap the channels between two stored programme positions.

Press MENU button to display the main menu.

1

Enter into "CHANNEL" menu, press POINT ▲▼ buttons to

2

select CHANNEL SWAP.

Press POINT ◄► buttons to enter into the Channel Swap

3

menu. Press POINT ▲▼ buttons to select the CURRENT
CHANNEL or TARGET CHANNEL, then press POINT ◄►
buttons to set the swap channel. And then press POINT ▲▼
buttons to select SWAPPING item, then press POINT ◄►
buttons to select "OK".

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

MANUAL SEARCH MENU

MANUAL SEARCH

CHANNEL 15

SEARCH

::

SELECT

MANUAL SEARCH

CHANNEL 15

SEARCH

::

SELECT

AUTO SEARCH
SEMI-AUTO SEARCH

MANUAL SEARCH

COLOUR SYSTEM

SOUND SYSTEM

SKIP

CHANNEL SWAP

::

SELECT

CURRENT CHANNEL

TARGET CHANNEL

SWAPPING

::

SELECT

CURRENT CHANNEL

TARGET CHANNEL

SWAPPING OK

OK

ADJUST

OK

ADJUST

CHANNEL

ADJUST

CHANNEL

CHANNEL SWAP

ADJUST

CHANNEL

CHANNEL SWAP

:

STORE

:

STORE

AUTO

:

BACK EXIT

:

BACK EXIT

55.25 MHZ

:

BACK

55.25 MHZ

:

BACK

B/G

OFF

12

16

12

16

:

:

::

SELECT

ADJUST

:

BACK EXIT

:

32

LCD-K40.indd 32 1/21/2010 10:47:26 AM

MENU OPERATION (TV/AV/HDMI mode)

PICTURE

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select "PICTURE", and will
display PICTURE menu.

Press POINT ▼ button to enter into PICTURE menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to adjust the item.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

Note:

●

"TINT" cannot be selected except for NTSC/ NTSC4.43

system.

● 3D NR will prohibited during 1080p mode.

PICTURE MODE

Select "DYNAMIC", "STANDARD", "VIVID", "SOFT" or
"PERSONAL" by pressing POINT ◄► buttons.

DYNAMIC:

Bright and dynamic picture. It is suitable for nice

playback, such as DVD program.

STANDARD:

Natural and splendid picture level preset on LCD

TV.

VIVID: Present colourful and lively picture level.
SOFT: Inhibit strong contrast and colour, it is beneficial for eye

protection.

PERSONAL:

User presets picture adjustment in PICTURE MODE.

CONTRAST

Press POINT ◄ button to decrease contrast, and POINT ►
button to increase contrast. (0~100)

BRIGHTNESS

Press POINT ◄ button to adjust image darken, and POINT ►
button to adjust image brighten. (0~100)

COLOUR

Press POINT ◄ button to lighten colour, and POINT ► button to
darken colour. (0~100)

TINT

Press POINT ◄► buttons to obtain proper colour. (0~100)

SHARPNESS

Press POINT ◄ button to soften the image, and POINT ►
button to sharpen the image. (0~100)

COLOUR TONE

This function is used for selecting colour temperature. Select
"NORMAL", "WARM" or "COOL" with POINT◄► buttons.

3D NR

This function is used for reducing noise interference on the screen.
Select "LOW", "MID", "HIGH" or "OFF" with POINT ◄► buttons.

MPEG NR

Select "LOW", "HIGH" or "OFF" with POINT ◄► buttons.
Removes unwanted ringing and block noise from images that have
undergone MPEG or JPEG compression and decompression.

FILM MODE

Performed on material which
to video.

underwent technologic conversion

PICTURE MENU

PICTURE MODE

CONTRAST

BRIGHTNESS
COLOUR

TINT

SHARPNESS

COLOUR TONE
3D NR
MPEG NR
FILM MODE

PICTURE MODE

CONTRAST

BRIGHTNESS
COLOUR

TINT

SHARPNESS

COLOUR TONE
3D NR
MPEG NR
FILM MODE

::

PICTURE

::

SELECT

ADJUST

PICTURE

SELECT

ADJUST

STANDARD

NORMAL

MID

HIGH

OFF

:

BACK EXIT

STANDARD

NORMAL

MID

HIGH

OFF

:

BACK EXIT

:

:

33

LCD-K40.indd 33 1/21/2010 10:47:26 AM

MENU OPERATION (TV/AV/HDMI mode)

SOUND

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select "SOUND", and will
display SOUND menu.

Press POINT ▼ buttons to enter into SOUND menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to enter the item selected.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

SOUND MODE

Press POINT ◄► buttons to select "STANDARD", "NEWS",
"MUSIC" or "PERSONAL".

EQUALIZER

Select different frequency ranges of sound separately by pressing
POINT ◄► buttons.
Adjust values of "120 Hz", "500 Hz", "1.5 KHz", "5KHz", "10KHz"
by pressing POINT ◄► buttons.

BALANCE

Adjust the balance of the left and right channels. (-15~15)

SURROUND

Switch Surround ON or OFF.

BASS EXPANDER

Switch Bass Expander ON or OFF.

SOUND MENU

SOUND MODE

EQUALIZER

BALANCE

SURROUND

BASS EXPANDER

AUTO VOLUME

::

SELECT

SOUND MODE

EQUALIZER

BALANCE

SURROUND

BASS EXPANDER

AUTO VOLUME

::

SELECT

SOUND MODE

EQUALIZER

BALANCE

SURROUND

BASS EXPANDER

AUTO VOLUME

ADJUST

ADJUST

SOUND

SOUND

SOUND

STANDARD

OFF
OFF

OFF

:

BACK EXIT

STANDARD

OFF
OFF

OFF

:

BACK EXIT

STANDARD

OFF
OFF

OFF

:

:

AUTO VOLUME

Switch Auto Volume ON or OFF.

Note:
SOUND MODE, EQUALIZER, SURROUND BASS EXPANDER

is disabled when SPORTS mode is ON.

SELECT

ADJUST

SOUND

120 Hz

500 Hz

1.5K Hz

5K Hz

10K Hz

EQUALIZER

::

SELECT

ADJUST

BACK

:

BACK EXIT

EXIT

:

34

LCD-K40.indd 34 1/21/2010 10:47:27 AM

MENU OPERATION (TV/AV/HDMI mode)

TIMER

TIMER MENU

OFF TIMER

ON TIMER - - : - -

ON TIMER CH

::

SELECT

OFF TIMER

ON TIMER - - : - -

ON TIMER CH

::

SELECT

OFF TIMER

ON TIMER 12 : 30

ON TIMER CH

::

SELECT

0~9

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select TIMER.

Press POINT ▼ buttons to enter into TIMER menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to enter the item selected.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

OFF TIMER

Once OFF TIMER has been set, when the set time is reached,
the TV will shift to stand-by status.

To select "OFF", "30 MIN", "60 MIN", "90 MIN" or "120 MIN" with
POINT ▲▼ buttons or TIMER button.

To cancel "OFF TIMER ", you can choose any option by the following
ways.

- Setting "OFF" in OFF TIMER menu.

- Pressing POWER ON/OFF button on Side Control.

- Pressing POWER ON/OFF button on Remote Control.

ON TIMER

Once ON TIMER has been set, you won't miss any opportunity
to watch the program you like.

To set channel position, you can use NUMERIC buttons or DIGIT
button. (Please refer to "DIRECT SELECTION" on page 18.)
After ON TIMER has been set, ON TIMER INDICATOR will be
light.

To cancel "ON TIMER MODE", you can choose any option by the
following ways.

- Setting "00 : 00" in ON TIMER.

- Disconnecting the AC power cord.

ADJUST

ADJUST

ADJUST

TIMER

TIMER

TIMER

OFF

16

:

BACK EXIT

OFF

16

:

BACK EXIT

OFF

16

:

BACK EXIT

:

:

:

ON TIMER CH

This function is only active that ON TIMER has been set. When
the set time in ON TIMER is reach, the TV will turn on and enter

OFF TIMER

ON TIMER - - : - -

ON TIMER CH

TIMER

OFF

16

the channel position you set directly .

To set channel position, you can use NUMERIC buttons or DIGIT
button. (Please refer to "DIRECT SELECTION" on page 18.)

::

SELECT

ADJUST

0~9

:

BACK EXIT

:

Note:

●

OFF TIMER and ON TIMER will be automatically cancelled
during searching channels.

●

The settings for OFF TIMER and ON TIMER will be automatically
cancelled after the settings has been operated for one time.

● In case you left TV without any operation for 2 hours after power

on by ON timer, TV will automatically power off itself.

35

LCD-K40.indd 35 1/21/2010 10:47:27 AM

MENU OPERATION (TV/AV/HDMI mode)

OSD

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select OSD.

Press POINT ▼ buttons to enter into OSD menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to enter the item selected.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

LANGUAGE

Press POINT ◄► buttons to choose ENGLISH, ARABIC or
PERSIAN.

H-POSITION

OSD moves to the left side when POINT ◄ button is pressed.
OSD moves to the right side when POINT ► button is pressed.
(0~100)

V-POSITION

OSD moves up when POINT ◄ button is pressed. OSD moves
down when POINT ► button is pressed. (0~100)

DURATION

Use this function to set the display time of the MENU when there
is no operation on the TV. Press POINT ◄ button to decrease
time, press POINT► button to increase time. (5~60 seconds)

TRANSPARENCY

The background of OSD darkens when POINT ◄ button is
pressed. The background of OSD lightens when POINT ► button is
pressed. (0~100)

TEXT LANGUAGE

Press POINT ◄► buttons to choose WESTERN, EASTERN,
ARABIC or FARSI for Language display in Teletext mode.

INPUT LABEL

This submenu is to give INPUT source tag name which is will be
displayed on INPUT menu. Press POINT ◄► buttons to select
"OFF"(blank), VCR, DVD, AUX, STB, GAME.

OSD MENU

LANGUAGE

H - POSITION

V - POSITION

DURATION

TRANSPARENCY

TEXT LANGUAGE
INPUT LABEL

::

SELECT

LANGUAGE

H - POSITION

V - POSITION

DURATION

TRANSPARENCY

TEXT LANGUAGE
INPUT LABEL

::

SELECT

LANGUAGE

H - POSITION

V - POSITION

DURATION

TRANSPARENCY

TEXT LANGUAGE

INPUT LABEL

SELECT

AV1

AV2- S

AV3

HDMI1

HDMI2

HDMI3

HDMI4

::

SELECT

ADJUST

ADJUST

ADJUST

INPUT LABEL

ADJUST

OSD

OSD

OSD

OSD

ENGLISH

5 SEC

WESTERN

:

BACK EXIT

ENGLISH

5 SEC

WESTERN

:

BACK EXIT

ENGLISH

5 SEC

WESTERN

BACK

OFF

DVD
OFF

HD

OFF

OFF
OFF

:

BACK EXIT

:

:

EXIT

:

Note:

HDMI4 is only for model LCD-42K40/A-HD.

36

LCD-K40.indd 36 1/21/2010 10:47:28 AM

MENU OPERATION (TV/AV/HDMI mode)

SETUP

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select SETUP.

Press POINT ▼ buttons to enter into SETUP menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to enter the item selected.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

Note:
"PC ADJUST" can not be selected except for PC mode.

SETUP MENU

CHILD LOCK

ECO

DYNAMIC AI

ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

ADJUST

SETUP

ON

SENSOR

ON
ON

OFF

HDMI1

:

BACK EXIT

:

CHILD LOCK

When CHILD LOCK is set "ON", the Side Control buttons will be
locked except for POWER ON/OFF button .

ECO

This function can automatically adjust panel's brightness by
ambient brightness.
Press POINT ◄► buttons to set "OFF", "ON" or "SENSOR".

DYNAMIC AI

Used to adjust contrast and color parameters until the display
looks good. Set it ON or OFF by pressing POINT ◄► buttons.

ACTIVE CONTRAST

Used to improved picture contrast by panel's backlight. Set it
ON or OFF by pressing POINT ◄► buttons.

GAME MODE

Switch GAME MODE ON or OFF.

GAME INPUT SELECT

Press POINT ◄► buttons to select "AV1", "AV2", "AV3",

"HDMI1", "HDMI2", "HDMI3" , "HDMI4" or "PC".

Note:

● When "GAME MODE" set to "OFF", "GAME INPUT SELECT"
is in gray and can not be selected.

● HDMI4 is only for model LCD-42K40/A-HD.

CHILD LOCK

ECO

DYNAMIC AI

ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

SETUP

ADJUST

ON

SENSOR

ON
ON

OFF

HDMI1

:

BACK EXIT

:

37

LCD-K40.indd 37 1/21/2010 10:47:28 AM

MENU OPERATION (TV/AV/HDMI mode)

HDMI LINK

XACTI LINK: Press POINT ◄► buttons to open link connection

for Xacti.

XACTI POWER ON: Press POINT ◄► buttons to select "ON",
The TV will turn on, but the Xacti will keep
the same status.
(Note: TV will turn on automatically when
the Xacti is turned on.)

XACTI POWER OFF:

the same status.

the TV is turned off.)

Note:

● When "XACTI LINK" set to "OFF", "XACTI POWER ON" and

Press POINT

The Xacti will turn off, but the TV will keep

(Note: Xacti will turn off automatically when

"XACTI POWER OFF" is in gray and cannot select.

● "HDMI LINK" doesn't work expect for Xacti connection.

● "HDMI LINK" doesn't work if no HDMI input signal.

(refer to "Duration" on MENU SETUP menu) to exit menu operation.

◄►

buttons to select "ON",

SHOP MODE

Press POINT ▲▼ buttons to select SHOP MODE.

1

Press POINT ◄► buttons to enter into SHOP MODE menu.

2

Press POINT ◄► buttons to choose HOME MODE or SHOP

3

MODE. Press OK button to enter into HOME MODE or SHOP
MODE.

HOME MODE

In this mode, the adjustments you have set of "Picture mode" and
"ECO" will be stored as the last memory automatically. ( The initial
settings are "DYNAMIC" and "OFF".)

SHOP MODE

In this mode, 30 minutes later after you made some adjustments
of "Picture mode" and "ECO" and no other operation on the LCD
TV, the initial setting will be recalled. ( The initial settings are
"DYNAMIC" and "OFF".) The message of "INITIAL SETTING
RECALLED FOR DEMO" will appear on the screen for 3 seconds.

CHILD LOCK

ECO

DYNAMIC AI

ACTIVE CONTRAST

GAME MODE

GAME INPUT SELECT

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

XACTI LINK

XACTI POWER ON

XACTI POWER OFF

::

SELECT

CHILD LOCK

ECO

DYNAMIC AI

ACTIVE CONTRAST

GAME MODE

GAME INPUT SELECT

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

PLEASE SELECT AND PRESS OK BUTTON

HOME MODE SHOP MODE

: SELECT

ADJUST

ADJUST

ADJUST

SETUP

SETUP

HDMI LINK

SETUP

ON

SENSOR

ON
ON

ON

HDMI1

:

BACK EXIT

ON

OFF

ON

:

BACK EXIT

ON

SENSOR

ON
ON

OFF

HDMI1

:

BACK EXIT

: ENTER

OK

:

:

:

Note:

●

Shop mode setting will be continued even after power off /on

by Remote

INITIAL SETTING RECALLED FOR DEMO

control, LCD TV or AC power plug.

At the first power on and just after plug and play channel set-up,

●
MODE menu will appear. Press POINT ◄► buttons to
OK button for SHOP MODE or HOME MODE.

Then the pop up menu

SHOP

select and press

disappears.

38

LCD-K40.indd 38 1/21/2010 10:47:29 AM

MENU OPERATION (PC mode)

PICTURE

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select "PICTURE", and will
display PICTURE menu.

Press POINT ▼ button to enter into PICTURE menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to adjust the item.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

Note:
"CHANNEL MENU"

doesn't work in PC mode.

PICTURE MODE

Select "DYNAMIC", "STANDARD", "VIVID", "SOFT" or
"PERSONAL" by pressing POINT ◄► buttons.

DYNAMIC:

Bright and dynamic picture. It is suitable for nice

playback, such as DVD program.

STANDARD:

Natural and splendid picture level preset on LCD

TV.

VIVID: Present colourful and lively picture level.
SOFT: Inhibit strong contrast and colour, it is beneficial for eye

protection.

PERSONAL:

User presets picture adjustment in PICTURE MODE.

CONTRAST

Press POINT ◄ button to decrease contrast, and POINT ►
button to increase contrast. (0~100)

BRIGHTNESS

Press POINT ◄ button to adjust image darken, and POINT ►
button to adjust image brighten. (0~100)

COLOUR TONE

This function is used for selecting colour temperature. Select
"PERSONAL", "NORMAL", "WARM" or "COOL" with POINT ◄►
buttons.

COLOUR-R

Press POINT ◄ button to lighten red tone, and POINT ► button
to deepen red tone. (0~100)

COLOUR-G

Press POINT ◄ button to lighten green tone, and POINT ►
button to deepen green tone. (0~100)

COLOUR-B

Press POINT ◄ button to lighten blue tone, and POINT ►
button to deepen blue tone. (0~100)

PICTURE MENU

PICTURE MODE

CONTRAST

BRIGHTNESS

COLOUR TONE

COLOUR - R

COLOUR - G

COLOUR - B

PICTURE MODE

CONTRAST

BRIGHTNESS
COLOUR TONE

COLOUR - R

COLOUR - G
COLOUR - B

::

PICTURE

::

SELECT

ADJUST

PICTURE

SELECT

ADJUST

STANDARD

NORMAL

:

BACK EXIT

STANDARD

NORMAL

:

BACK EXIT

:

:

39

LCD-K40.indd 39 1/21/2010 10:47:29 AM

MENU OPERATION (PC mode)

SOUND

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select "SOUND", and will displa
SOUND menu.

Press POINT ▼ buttons to enter into SOUND menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to enter the item selected.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

Note:

For the details, please refer to "SOUND" on page 34.

TIMER

y

SOUND MENU

SOUND MODE

EQUALIZER

BALANCE

SURROUND

BASS EXPANDER

AUTO VOLUME

::

SELECT

ADJUST

SOUND

STANDARD

OFF
OFF

OFF

:

BACK EXIT

:

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select TIMER.

Press POINT ▼ buttons to enter into TIMER menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to enter the item selected.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

Note:

For the details, please refer to "TIMER" on page 35.

OSD

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select OSD.

Press POINT ▼ buttons to enter into OSD menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to enter the item selected.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

Note:

For the details, please refer to "OSD" on pages 36.

TIMER MENU

OFF TIMER

ON TIMER - - : - -

ON TIMER CH

::

SELECT

TIMER

ADJUST

OSD MENU

LANGUAGE

H - POSITION

V - POSITION

DURATION

TRANSPARENCY

TEXT LANGUAGE
INPUT LABEL

::

SELECT

OSD

ADJUST

OFF

16

:

BACK EXIT

ENGLISH

5 SEC

WESTERN

:

BACK EXIT

:

:

40

LCD-K40.indd 40 1/21/2010 10:47:29 AM

MENU OPERATION (PC mode)

SETUP

Press MENU button and the main menu will appear.

1

Press POINT ◄► buttons to select SETUP.

Press POINT ▼ buttons to enter into SETUP menu.

2

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to enter the item selected.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait for 5~60 seconds (refer to

"DURATION" on page 36) to exit menu operation.

Note:
For the details, please refer to "SETUP" on pages 37-38.

PC ADJUST

This function is used to adjust the position of image displayed on
screen. It can be selected when the LCD TV could be received
PC signal and in PC mode. (Refer to "SIGNAL MODE COLUMN"
on page 47.)

Press POINT ◄► buttons to enter PC SCREEN menu. It can
be select "AUTO ADJUST", "H-POSITION", "V-POSITION",
"PHASE", "CLOCK" or "AUTO SHUT DOWN" to adjust.

AUTO ADJUST

Press POINT ◄► buttons, and the TV automatically detects
incoming signal, and adjust itself to optimize its performance.
If the image is not displayed properly, a manual adjustment is
required (Refer to following adjustments).

H-POSITION

The horizontal picture position will be moved to the left side by
pressing POINT ◄ button. And it will be moved to the right side by
pressing POINT ► button. (0~100)

V-POSITION

The vertical picture position will be moved down side by pressing
POINT ◄ button. And it will be moved up side by pressing POINT
► button. (0~100)

PHASE

Eliminate disorder from the image. Press POINT ◄► buttons to
adjust PHASE. (0~100)

CLOCK

Eliminate flicker from the image. Press POINT ◄► buttons to
adjust CLOCK. (0~100)

AUTO SHUT DOWN

Press POINT ◄► buttons to set AUTO SHUT DOWN ON or OFF.
When PC is switched Off, ''NO SIGNAL'' appears for 30 seconds,
TV will be automatically switched to Backlight off mode.
During Backlight Off Mode within 10 minutes, TV will be switched
to On Mode if PC is switched On.
After Backlight Mode continues for 10 minutes, it will be switched
to Standby Mode. During Standby mode, TV will not be switched
to On mode even if PC is switched On.
To switch on TV, press Power button on Remote Control or TV.

Note:
This function is for PC mode (full screen) only. It is not applicable
for PIP/POP dual pictures.

SETUP MENU

CHILD LOCK

ECO

DYNAMIC AI

ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

CHILD LOCK

ECO

DYNAMIC AI

ACTIVE CONTRAST

GAME MODE

GAME INPUT SEL

HDMI LINK

PC ADJUST

SHOP MODE

::

SELECT

AUTO ADJUST

H - POSITION

V - POSITION

PHASE

CLOCK

AUTO SHUT DOWN

::

SELECT

SETUP

ADJUST

SETUP

ADJUST

SETUP

PC ADJUST

ADJUST

AUTO ADJUST

ON

SENSOR

ON
ON

OFF

HDMI1

:

BACK EXIT

ON

SENSOR

ON
ON

OFF

HDMI1

:

BACK EXIT

ON

:

BACK EXIT

:

:

:

41

LCD-K40.indd 41 1/21/2010 10:47:30 AM

DEALER MODE

DEALER MODE

TO DISPLAY DEALER MODE:
Press INFO button on remote control while holding MENU button on Side control to display Dealer mode menu.

The Dealer Mode has 9 different modes: VOLUME LOCK,
TUNING LOCK, START MODE, OSD, RC, AC POWER MODE,
START VOLUME LEVEL, MUSIC MODE SETUP and RESET.

Take the way of setting VOLUME LOCK for example:

Press POINT ◄► buttons to select a maximal volume.

1

Press INFO button on remote control while holding MENU

2

button on Side control to display Dealer mode menu.

VOLUME LOCK will be the default selection. (When you

3

adjust others, press POINT ▲▼ buttons to select the item
desired.)

Press POINT ◄► buttons to select "ON". (The maximal

4

volume is the set value by step 1.)

Press menu button to exit menu operation.

5

VOLUME LOCK

This function is used to limit the maximal volume.

TUNING LOCK

The way to prevent user from executing the Tuning function.

START MODE

The LCD TV will automatically enter to the setting mode while
being turned on. You can select OFF, TV(0-10), AV1, AV2(S-VIDEO),
AV3(DVD), HDMI1, HDMI2, HDMI3 , HDMI4 or PC in START
MODE. When it is set "OFF", it will keep the mode before being
turning off.

Note:

HDMI4 is only for model LCD-42K40/A-HD.

OSD

When it is set "OFF", Corresponding OSD cannot display on the
screen while operating.

RC

You can set "NORMAL", "PROHIBIT" or "SEPARATE" in RC
MODE.Use this feature to set Remote Control Function including
Power ON/OFF function.

● NORMAL

- Set Remote Control to normal function.

● PROHIBIT

-

Set buttons on the Remote Control to prohibit to use except

for Power button.

● SEPARATE

- Power button still can be functioned to Power ON/OFF.

-

Red button to Power OFF in all modes including Teletext mode.

-

Green button to Power ON in all mode including Teletext mode.

- Yellow button inactive in all modes.

- Blue button inactive in all mode.

42

REMOTE CONTROL

SIDE CONTROLS

OK

DEALER MODE MENU

VOLUME LOCK

TUNING LOCK

START MODE

OSD

RC

AC POWER MODE

START VOLUME LEVEL

MUSIC MODE SETUP

RESET

: SELECT

POINT
▲/▼
buttons

INFO button

MENU button

DEALER MODE

: ADJUST

: BACK

/◄/►

OFF

OFF

OFF

OFF

NORMAL

STAND

OFF

: EXIT

LCD-K40.indd 42 1/21/2010 10:47:31 AM

DEALER MODE

AC POWER MODE

You can set "STAND", "ON" or "LAST" in AC POWER MODE.
Use this feature to set TV condition when AC cord plug-in.

● STAND

- When AC cord plug-in, LCD TV always STAND-BY.

● ON

- When AC cord plug-in, LCD TV always ON.

● LAST

- When AC cord plug-in, the LCD TV will depend on last TV
condition. (ON or Stand-by)

START VOLUME LEVEL

You can select "OFF" or "1-100" in START VOLUME LEVEL.
Use this feature to set volume bar level position every time
TV turned on.

MUSIC MODE SETUP

MUSIC mode is used to block picture on channel program.
Use this feature to set Music Mode condition in set 5 Position
Channel.

Press and hold Menu button on Side Controls, and press

1

INFO button on remote control to display Dealer mode menu.
Press POINT ▲▼ buttons to select MUSIC MODE SETUP.

Press POINT ◄► buttons to enter into MUSIC MODE

2

SETUP menu.

Press POINT ▲▼ buttons to select the item desired.

3

Press POINT ◄► buttons to enter the item selected.

4

■ Press BACK button to return to the previous menu.

■ Press MENU button or wait to exit menu operation.

Note:

When the channel set with Music mode is selected, Eco mode is ON, and

press ECO button,screen display ECO ON.

VOLUME LOCK

TUNING LOCK
START MODE

OSD

RC

AC POWER MODE

START VOLUME LEVEL

MUSIC MODE SETUP

RESET

: SELECT

: ADJUST

MUSIC MODE SETUP

MUSIC MODE POS1

MUSIC MODE POS2
MUSIC MODE POS3

MUSIC MODE POS4

MUSIC MODE POS5

: SELECT

: ADJUST

DEALER MODE

: BACK

: BACK

OFF

OFF

OFF

OFF

NORMAL

STAND

OFF

1

255

255

255

255

: EXIT

: EXIT

RESET

This function returns all setting values to the factory default
settings.

43

LCD-K40.indd 43 1/21/2010 10:47:31 AM

APPENDIX

CLEANING LCD TV

Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV.
Clean your LCD TV as follows:

● Gently wipe the screen and cabinet with dry soft cloth.

● The screen is likely to be damaged if it is not maintained properly. Do not use hard objects

like a hard cloth or paper. Do not use solvents or abrasions.

CAUTION :

Do not use benzene, thinner, or any volatile substances to clean the LCD TV. These

chemicals may damage the cabinet finish.

FUNCTION OF PRODUCT SAFETY FEATURE

For protecting product safety, protection feature provided inside LCD TV. Refer to the
following please.

AUTO POWER OFF

When a trouble is detected in the LCD TV, the protection function works and turn the LCD TV
OFF automatically. When the LCD TV is turned OFF with this function, the POWER indicator
becomes red and LCD TV's power cannot be turned ON.
Disconnect Power cord and contact sales dealer where you purchased the LCD TV or the
service center.

To turn on LCD TV again for checking:

1) Disconnect Power cord from AC outlet and plug it on again.

2) Refer to "TURNING ON/OFF LCD TV" on Page 15 to attempt to turn on LCD TV.

If LCD TV is not turned on, disconnect Power cord and contact to service center.

44

LCD-K40.indd 44 1/21/2010 10:47:31 AM

APPENDIX

TROUBLE SHOOTING

Before calling your dealer or service center for assistance, check the matters below once again.

Make sure you have connected LCD TV to your equipment as described in the section "CONNECTING

1.
LCD TV" .

Check cable connection. Verify that all external equipment and power cords are properly connected.

2.

3. Verify that all power is switched on.

4. If LCD TV still does not produce an image, re-start the external equipment.
If the image still does not appear, unplug LCD TV from the external equipment and check the external

5.

equipment. The problem may be with your graphics controller rather than with LCD TV. (When you

reconnect LCD TV, remember to turn the external equipment and TV off before you power up LCD TV.

Power the equipment back on in order of : LCD TV and external equipment.)

6. If the problem still exists, check the following chart.

Problem:

NO

POWER

Remote

Control

does not

work

No image

No sound

There are
tiny black
points
and/or
bright
point on
the TV

Abnormal
colour of
image

WARNING :
High voltages are used to operate this LCD TV. Do not attempt to open the cabinet.

● Plug this LCD TV into the AC outlet.

●

Press ON/STAND-BY button on SIDE Control or on Remote Control to

● Check POWER Indicator. If this indicator flashes, LCD TV has any trouble.

● Check the batteries.

●

Make sure nothing is between the Remote Receiver and the

● Make sure you are not too far from LCD TV when using Remote Control.

Maximum operating range is 16.4' (5m).

● Is direct sunlight or strong artificial light shining on LCD TV's Infrared Remote

Receiver? Eliminate the light by closing curtains, pointing the light in a different
direction, etc.

● Check the connection between the external equipment and LCD TV.

● When turning LCD TV on, it takes a few seconds to display the image.

● Check the system that you select is corresponding with the external equipment or the video

equipment.

● Make sure the temperature is not out of the Operating Temperature (0°C ~ 40°C).

● Turn off power, then turn on again, re-start LCD TV.

● Check Audio cable connection from Audio input source.

● Adjust the Audio source.

● Press VOLUME (+) button.

● Press MUTE button.

● Dark or bright points of light (red, green, or blue) may appear on the screen. This is a

characteristic of the LCD panels, not a malfunction of the LCD TV.

● Adjust the value of colour.

● Select different colour system.

Try these Solutions

open this LCD TV.

Remote Control.

If the problem still persists after following all operating instructions, contact the sales dealer where you
purchased LCD TV or the service center. Give the model number and explain the difficulty. We will
advise you how to obtain service.

45

LCD-K40.indd 45 1/21/2010 10:47:31 AM

APPENDIX

TECHNICAL SPECIFICATIONS

Model LCD-32K40/A , LCD-42K40/A-HD
Maximum Visible Range LCD-32K40/A: 81cm ; LCD-42K40/A-HD: 106cm (Screen Diagonal Size)
Picture Resolution LCD-32K40/A: 1366(H) x 768(V) ; LCD-42K40/A-HD: 1920(H) x 1080(V)
Definition RF Analog Signals: Horizontal≥300; Vertical≥400
Voltage AC110-240V 50/60Hz
Power Consumption LCD-32K40/A: 100W ; LCD-42K40/A-HD: 179W
Power Management VESA DPMS
Colour System PAL/SECAM/NTSC/NTSC4.43
Sound System D/K, I, M, B/G
Channel Coverage - VHF: E2-E12, R1-R12, K1-K9, J1-J12, A2-A13

- UHF: 21-69, A14-A69, J13-J62

- CATV: S1-S41, X, Y, Z, Z+1, Z+2
Aerial input impedance 75Ω
Speaker Size Mains: 4.6cm x 15.4cm x 2pcs
Sound speciality Maximum Output Power is 10W+10W
Total Harmonic Distortion(THD)≤10%
Input and Output terminals
AV1 Input Video Input: Composite video Input (RCA Jack) x1
Audio Input: L/R Stereo Input (RCA Jack) x 1 set
AV2 Input Video Input: Composite video Input (RCA Jack) x1
Audio Input: L/R Stereo Input (RCA Jack) x 1 set
S-Video Input: DIN 4-pin Jack x1
AV3 Video Input: Component Y (combined with composite video input),
CB, CR Input (RCA Jack) x1 set
Audio: L/R Stereo Input (RCA Jack) x 1 set
HDMI Input Model LCD-32K40/A: HDMI Terminal 19 pin x3
Model LCD-42K40/A-HD: HDMI Terminal 19 pin x4
PC Input Video Input: D-SUB 15 pin x1
Audio Input: Mini stereo jack x 1
Output Terminals Video Monitor Output: RCA jack x 1
Audio Monitor Output: L/R Stereo Output (RCA jack) x 1 set
Headphone Jack: Mini stereo jack x1
Dimensions
(Width x Height x Depth) LCD-32K40/A: 789 x 551 x 272 mm
(Including Stand) LCD-42K40/A-HD: 1010 x 675 x 272 mm
Net Weight
(Including Stand ) LCD-32K40/A: 12.5 KG ; LCD-42K40/A-HD: 18.5 KG

Operating Environment
Operating Temperature 0ºC~40ºC（32ºF~104ºF
Operating Humidity 20~80%
Storage Temperature -10ºC~50ºC（14ºF~122ºF
Storage Humidity 20~80%

Note:

Specifications are subject to change without notice.

■

The On-Screen Menu and figures in this manual may diffrer slightly from the product.

■

）

）

46

LCD-K40.indd 46 1/21/2010 10:47:31 AM

APPENDIX

CONFIGURATIONS OF VGA TERMINALS

VGA IN (D-SUB)

Terminal : D-SUB15 PIN
Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When
connecting Macintosh computer, the MAC Adapter (not supplied) is required.

Pin Configuration

Set slide switches as shown in the table below depending on RESOLUTION MODE that you
want to use before you turn on LCD TV and computer.

Slide Switches (1-6)

ON

OFF

This LCD TV can correspond to the signals below. After connecting with the computer, LCD TV
can automatically recognize the signal from the connected PC( computer)/ HDMI.

PC SIGNAL MODE COLUMN (recommended)

TERMINAL

Red Input

1

Green Input

2

Blue Input

2

1

5

34

10

9 678

15

1112

14 13

3

Sense 2

4

Ground (Horiz.sync.)

5

Ground (Red)

6

Ground (Green)

7

Ground (Blue)

8

No Connect

9

Ground (Vert.sync.)

10

Sense 0

11

Sense 1

12

Horiz. sync.

13

Vert. sync.

14

Reserved

15

MAC ADAPTER (Not Supplied)

3

4

ON

1

2 3 4 5 6

1

2

DIP

13" Mode (640x480)

16" Mode (832x624)

19" Mode (1024x768)

ON

OFF

OFF

ON

ON

ON

OFF

OFF

ON

OFF

ON

OFF

OFF

OFF

OFF

6

5

OFF

OFF

OFF

SIGNAL MODE COLUMN (Recommended)

Note:

● In case LCD TV can not display properly due to the connecting cable or the graphic hardware,

please make adjustments about phase, clock and so on.

● In principle, LCD TV can not display the signal mode which not described in the above column.

But sometimes it can display a signal very similar with one of the signal described.

● If you want to change the definition and colour of PC, please select one from the column.

It is not the trouble of LCD TV if interference appears on the picture while switching the signal mode.

●

●

It is different from CRT Monitor that it is no blink of the picture when the V-Freq. of the signal s 60Hz.
It is recommended to select 60Hz V-Freq. of your computer to display better pictures.

● The Dot Clock of the computer's signal must be less than 100 MHz.

● Specifications are subject to change without notice.

In case of the following things, some messages will display on the screen.

● When the input signal from PC is out of the display range, "OUT OF RANGE" will display.

47

LCD-K40.indd 47 1/21/2010 10:47:32 AM

APPENDIX

When input signal is digital from DVD terminal, refer to the chart below.

When input signal is digital from HDMI terminal, refer to the chart below.

ResolutionNO.

EIA1920×1080i@60

EIA1920×1080p@60

EIA1920×1080i@50

EIA1920×1080p@50

EIA1280×720p@60

EIA1280×720p@50

EIA720x480p(w)@60

EIA720x576p(w)@50

Audio Freq. Format :

TM

HDMI (V.1.3 with Deep Color）

33.750

67.500

28.125

56.250

45.000

37.500

31.500

31.250

Frame
Frequency

Xacti camera models with HDMI-CEC:

VPC-HD2000
VPC-FH1
VPC-FH11
VPC-TH1
VPC-WH1
VPC-CS1
VPC-SH1
VPC-CG100
VPC-CG200
VPC-CH1
VPC-CA100

60.00H

60.00HZ

50.00HZ

50.00HZ

60.00HZ

50.00HZ

60.00HZ

50.00HZ

Z

48

LCD-K40.indd 48 1/21/2010 10:47:32 AM

APPENDIX

UNINSTALLING STAND BASE

CAUTION IN UNINSTALLING STAND BASE

● Through in uninstalling work, handling with more than two people is recommended.

When holding (moving or lifting) the LCD Display, hold the display's body.

●

TV by holding the attached accessory parts (speakers), otherwise it may result in damage.
Before uninstalling, provide a desk (or a part of it) which is strong enough to support the weight of

●

the LCD TV and this stand. The desk must be larger than the LCD
surface must be flat and maintained with
surface.
Before putting the LCD Display on the desk, make sure there is no object on it. Leaving any object

●
under the screen may cause damage on the screen.

●

The LCD TV with this stand should be uninstalled on

an non flat, unlevel or unstable cart or stand. The display may fall,

to the products but serious injury to a person.

soft material (such as a blanket) for protecting the screen

flat and level place. Do not place on such as

SAFETY NOTE

For correct installing, mounting and uninstalling LCD TV Stand, it is strongly recommended to use
a trained, authorized dealer. Failure to follow correct procedures could result in damage to the
equipment or injury to the installer.

Uninstalling Stand Base

Place the LCD TV screen facing down on a flat surface place where maintained with soft

1

materials (such as a blanket) for protecting the display screen.

Do not handle the LCD

Display screen size. The desk's

causing not only serious damage

Release screw in 4 holes with screw driver.

2

49

LCD-K40.indd 49 1/21/2010 10:47:36 AM

APPENDIX

Uninstalling Stand Base

Note: For model LCD-42K40/A-HD,

Pull the stand base out from the cabinet after all screws already removed.

3

release screw in 6 holes with screw driver.

50

LCD-K40.indd 50 1/21/2010 10:47:40 AM

APPENDIX

Uninstalling Stand Base

Cover the holes where you remove the stand base from the dust etc. by paste the deck label

4

(supplied) to these holes.

1pcs (Model LCD-32K40/A)

or

1pcs (Model LCD-42K40/A-HD)

Uninstalling the stand base is completed

5

now.

51

LCD-K40.indd 51 1/21/2010 10:47:43 AM

Part No. 1AA6P1P5823-- N7TK (UE6-A

LCD-K40.indd 52 1/21/2010 10:47:44 AM

)

SANYO Electric Co., Ltd.