Haier LCD-24K50-W, LCD-24K50R, LCD-24K50 User Manual

INSTRUCTION MANUAL
LCD TV
LCD-24K50 LCD-24K50(R) LCD-24K50(W)
IMPORTANT INFORMATION
If a television is not positioned in a sufficiently stable location, it can be potentially
taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer of the television.
Only using furniture that can safely support the television.
Ensuring the television is not overhanging the edge of the supporting furniture.
Not placing the television on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television to a suitable
support.
Not standing the televisions on cloth or other materials placed between the
television and supporting furniture.
Educating children about the dangers of climbing on furniture to reach the
television or its controls.
Warning:
To prevent the spread of fire, keep candles or other open flames away from this product at all times.
2
TO THE OWNER
Before operating this LCD TV, read this manual thoroughly and operate the LCD TV properly. This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your LCD TV seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section on page 25 of this booklet. If the problem still persists, contact the dealer where you purchased the LCD TV or the service center.
Safety Precaution
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Install the LCD TV in a proper position. If not, it may result in a fire
hazard.
Provide appropriate space on the top, sides and rear of the LCD
TV cabinet for allowing air circulation and cooling the LCD TV. Minimum clearance must be maintained. If the LCD TV is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Do not cover the ventilation slot on the LCD TV. Heat build-up can reduce the service life of your LCD TV, and can also be dangerous.
If the LCD TV is not to be used for an extended time, unplug the
LCD TV from the power outlet.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.
10 cm
SIDE and TOP
10 cm
10 cm
REAR
6 cm
Caution In Installing
Handle the
carefully when installing it and do not drop.
LCD TV
Locate set away from heat, excessive dust, and direct sunlight.
For correct installation and mounting it is strongly recommended to use a trained, authorized dealer.
Failure to follow correct mounting procedures could result in damage to the equipment or injury to the installer.
NOTE :
When LCD TV is not used for a long period of time, unlighted dots may be observed. This is caused by characteristic of the LCD TV. If this occurs, turn the LCD TV on and leave it on about 1 hour. These dots will gradually disappear.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.
3
SAFETY INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this LCD TV from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the LCD TV.
For added protection to the LCD TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may cause hazards.
Do not place this LCD TV on an unstable cart, stand, or table. The LCD TV may fall, causing serious injury to a child or adult, and serious damage to the LCD TV. Use only with a cart or stand recommended by the manufacturer, or sold with the LCD TV. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided for ventilation, to insure reliable operation of the equipment and to protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the LCD TV on a rug, or other similar surface. This LCD TV should never be placed near or over a radiator or heat register.
This LCD TV should not be placed in a built-in installation such as a book case unless proper ventilation is provided.
Never push objects of any kind into this LCD TV through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the LCD TV.
Do not place items such as vases containing liquid on top of the LCD TV.
Do not install the LCD TV near the ventilation duct of air-conditioning equipment.
This LCD TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this LCD TV where the cord may be damaged by persons walking on it.
Do not attempt to service this LCD TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this LCD TV from wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the LCD TV. c.
If the LCD TV has been exposed to rain or water.
d.
If the LCD TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the LCD TV to normal operation. e. If the LCD TV has been dropped or the cabinet has been damaged. f. When the LCD TV exhibits a distinct change in performance-this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this LCD TV, ask the service technician to perform routine safety checks to determine that the LCD TV is in safe operating condition.
DISPOSAL PRECAUTIONS
CONTAINS MERCURY LAMPS, DISPOSE OF PROPERLY
4
TABLE
FEATURE AND DESIGN.......................................6
PREPARATION........................................7
PART NAMES AND FUNCTIONS 7
CONNECTING LCD TV......................8
INSTALLING & UNINSTALLING
STAND BASE 8
CONNECTING AC POWER CORD 9
CONNECTING A COMPUTER 9
CONNECTING VIDEO EQUIPMENT &
AERIAL 10
BEFORE OPERATION..........................11
OPERATION OF REMOTE CONTROL 11
REMOTE CONTROL BATTERIES
INSTALLATION 11
BASIC OPERATION..............................12
TURNING ON/OFF LCD TV 12
PLUG & PLAY
SELECTING INPUT SOURCE 13
CHANNEL RECALL 13
CHANNEL SELECTION 13
INFO 13
VOLUME CONTROL 14
MUTE 14
STEREO/MONO 14
SOUND MODE 14
PICTURE MODE 14
SPORT MODE 14
OFF TIMER 15
WIDE 15
12
MENU OPERATION (TV/AV/HDMI MODE)............16
CHANNEL
PICTURE
SOUND
TIMER
OSD 19
SETUP 20
MENU OPERATION(PC MODE)
SETUP 21
DEALER MODE
APPENDIX..............................................................24
CLEANING LCD TV 24
FUNCTION OF PRODUCT SAFETY FEATURE
TROUBLESHOOTING 25
TECHNICAL SPECIFICATIONS 26
SIGNAL MODE COLUMN (Recommended) 27
16-17
18
18
19
............................21
22-23
24
is registered trademarks of HDMI Licensing, LLC.
TRADEMARKS
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.
IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
Each name of corporations or products in the owner's manual is a trademark or a registered trademark
of its respective corporation.
5
Feature and Design
¡ Picture
High Definition LCD Panel
1366 x 768 pixel HD LCD Panel with high contrast ratio and wide viewing angle.
VIZON Engine
VIZON Engine, SANYO High Quality Image Processing Technology reproduces clear, dynamic, natural and realistic picture along with HD LCD Panel Technology.
Dynamic AI
The AI (Automatic Image Control) circuit compensates picture contrast and brightness level dynamically and reproduces bright and high-contrast picture.
¡ Sound
NICAM/A2 Stereo
It's the Stereo Sound PAL Color TV Broadcasting System upgrading mono-sound TV service to stereo or dual-language sound.
Bass Expander
Bass Expander reinforces bass effect to improve overall sound quality.
¡ Feature
Sport Mode
Just by pressing the button, sport mode optimizes picture and sound settings suitable for each sport program.
OFF
Normal setting.
Football
Use to watch football progarm, golf progarm
or etc.
Winter Sport
Suitable setting for Skiing
Marine Sport
Suitable setting for Swimming, Diving
progarm or etc.
Indoor Sport
Suitable setting for Basketball, Badminton progarm or etc.
progarm or etc.
¡ Compatibilty
Full Multi System
PAL, PAL 60Hz, SECAM, NTSC, NTSC 4.43 system can be connected.
HD-Ready
1080p, 1080i, 720, High Definition signals are receivable.
HDMI
HDMI provides complete transmission of digital image and sound signals without any quality deterioration. DVI can be connected to HDMI.
PC Input
Personal Computer/Laptop can be connected with automatic resolution adjustment.
Terminals
HDMI for BluRay Player etc. D-SUB 15-pin for PC input etc. Component Video for DVD
¡ Others
Wall Mounting
It's designed for VESA Standard wall hanging bracket.
Light Commercial Mode
By entering Dealer mode, Volume Lock, Tuning Lock, Start Mode, OSD, RC, AC Power Mode, Start Volume Level, Music Mode and Reset can be selected. Convenient for placing in Hotel, Hospital, School, Store, Bank etc.
SHOP Mode
Picture mode will be Dynamic and ECO mode will be OFF in SHOP
MODE.
6
PREPARATION
PART NAMES AND FUNCTIONS
FRONT
Side Control
Power/Timer
Indicator
CARE FOR USING LCD TV
Do not bump or scratch the panel surface as this causes flaws on the surface of the screen.
There may be some tiny black points and/or bright points on the SCREEN. These points are normal.
SIDE CONTROL
Each button on the control panel has the same function with its counterpart on the remote control.
-Used to turn the LCD TV on or off.
-Open or close the On-Screen Menu.
-
Used to select input source: TV/AV1/ AV2(DVD)
-Used to confirm the selected item on On-Screen Menu.
-Used to adjust the volume.
-Used to adjust the value of the selected item on On-Screen Menu.
-Used to execute the selected item on On-Screen Menu.
-Used to Change channels.
-Used to select items on On-Screen Menu.
POWER ON/ OFF button
MENU button
INPUT MODE button
VOLUME
CHANNEL UP/DOWN (▲/▼)
(+/-)
buttons
/HDMI(DVI)/PC.
buttons
Infrared Remote
Receiver
BACK TERMINAL
HDMI Input Terminal
Connect video and audio outputs from video equipment.
PC Input Terminals
Connect computer outputs to these terminals.
RGB (D-SUB)
AV1 Terminals
Connect video and audio outputs from video equipment.
Video (RCA type)
Audio L and R (RCA type)
Monitor Output Terminals
Connect a television, video recorder or external audio amplifier to these jacks.
Video (RCA type)
Audio L and R (RCA type)
Audio (L/R)
AV2 Terminals
Connect video and audio outputs
video equipment.
from
DVD component (RCA type)
Audio L and R (RCA type)
Connect the cable with a plug from aerial jack to the aerial socket on the cabinet back.
Aerial Jack
Panel
7
CONNECTING LCD TV
INSTALLING & UNINSTALLING STAND BASE
Please according to the following procedure to install stand.
Be careful of the panel. Suggest to put down the panel side on the cushion or other soft material before
1
installing the stand.
To align the corresponding pilot holes and fix the stand by screws.
2
Screws A for LCD-24K50/(R)/(W): 2 pcs Screws B for LCD-24K50/(R)/(W): 2 pcs
Installing of stand is completed.
3
Model LCD-24K50/(R)/(W):
A
B
CAUTION IN UNINSTALLING STAND BASE
● Through in uninstalling work, handling with more than two people is recommended.
When holding (moving or lifting) the LCD Display, hold the display's body.
TV by holding the attached accessory parts (speakers), otherwise it may result in damage. Before uninstalling, provide a desk (or a part of it) which is strong enough to support the weight of
the LCD TV and this stand. The desk must be larger than the LCD surface must be flat and maintained with surface. Before putting the LCD Display on the desk, make sure there is no object on it. Leaving any object
under the screen may cause damage on the screen.
The LCD TV with this stand should be uninstalled on an non flat, unlevel or unstable cart or stand. The display may fall,
to the products but serious injury to a person.
soft material (such as a blanket) for protecting the screen
flat and level place. Do not place on such as
Do not handle the LCD
Display screen size. The desk's
causing not only serious damage
SAFETY NOTE
For correct installing, mounting and uninstalling LCD TV Stand, it is strongly recommended to use a trained, authorized dealer. Failure to follow correct procedures could result in damage to the equipment or injury to the installer.
8
CONNECTING AC POWER CORD
This LCD TV uses nominal input voltages of 110-240V AC. This LCD TV automatically selects the correct input voltage. It is designed to work with single­phase power systems. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the LCD TV with all peripheral equipment before turning the LCD TV on.
CAUTION
For safety, unplug AC power cord when the LCD TV is not in use.
CONNECTING A COMPUTER
Cables used for connection (These cables are not supplied with this LCD TV.)
PC/VGA Cable (D-SUB 15pin)
HDMI Cable: HDMI Input
MAC Adapter (in the case of connecting Macintosh
computer)
Audio Cable [Mini Plug (L/R)]
CONNECTING LCD TV
AC POWER CORD
To the AC Outlet (110
- 240V AC). AC power cord out from the LCD TV. outlet must be near this equipment and must be easily accessible.
NOTE:
When connecting the cables, AC Power Cords of both LCD TV and external equipment should be disconnected from AC outlet. Turn LCD TV and peripheral equipment on before your computer is switched on.
Pulls the
The AC
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA )
Digital AV Equipment
Desktop
type
HDMI Output
Audio Output
(stereo)
Laptop
type
HDMI Input
Audio Input (stereo)
Monitor Output
MAC
Adapter
PC Input
Note:
1. You can connect the DVI source to HDMI input terminal by using the DVI to HDMI converter.
2. When inputting 1080p signal to HDMI terminal, please use High Speed HDMI Cables to avoid picture/ sound noise and no picture/sound.
9
Loading...
+ 19 hidden pages