Haier L24F6, L24F6c, L24F6d User Manual

Ŀ ¼

TABLE OF CONTENTS

Important Safety Instructions 1
Product Introduction 3

General information 3
Features 4
listing 7

& Connection 8
Panel Control Keys 15
Remote control 16
Basic Operation Instruction 18

Power On 18
Standby 18
Signal Source Selection 18
Menu Operation Instruction 19
PICTURE 19
SOUND 21
OSD 22
ADVANCE 23
TV 24

Simple troubleshooting 28

Installation

1

Important Safety Instructions

Thank you to choose the LCD TV monitor made by our company, a valuable product with excellent quality and multiple
functions. This machine will bring you more audiovisual enjoyment. Its design can insure user's safety. All machine are
strictly tested before leaving factory. But incorrect use can lead to electric shock or fire. In order to insure safety and
extend its life, please read below regulations carefully before using it and comply with the following safety instructions.

1 Read the manual and marking label before using the machine, and keep the user manual for later use.
2 There is high voltage inside the machine, follow all the warnings and instructions strictly on the manual.
3 Don't use the attachments which are not recommended by the machine manufacturer as they may cause hazards.
4 The power cord must be placed correctly so as to avoid be trample or crush.
5 Please do not make the power socket overloaded or the power cord extended. Otherwise it will cause fire or electrical
shock.
6 If you are going to pull out the power cord from this product, please dry your hands, pull the cord by grasping the plug.
Never pull the cord itself.
7 If you will not use the machine for a long time, please pull out the power cord. Do not keep the sleeping mode for too
long time.
8 Please put this machine in the place of well ventilation instead of extremely hot, cool or moist, and direct sunshine.
9 The slots on the case is designed to release heat so as to assure that all inside components will not reach an extra
high temperature and can work normally for a long time. Please do not cover the holes while place it. Don't place the
machine near or over heat source or place in built-in installation.
10 The power cord must be taken off before you clean the machine. Don't use the liquid cleanser or aerosol cleanser. It
is recommended to use a wet soft cloth to clean the machine. Don't use the alcohol, impregnant or ammoniac liquid
to wipe the screen.
11 Please don't place it on an unstable position so as to avoid falling off.
12 Don't place the LCD TV near water source, like a bathtub, pool, washing machine, or moist cellar and similar
environment.
13 The LCD panel is fragile and expensive. The surface of the panel is easy to be scratched. Please don't use the hard
thing to knock, press, score the panel. Otherwise it will be harmful for the panel. The exchange cost is very high.

2

14 There is high voltage inside the machine but no parts which can be repaired by users themselves. In order to assure
the people's safety, please don't open the case to repair it by yourself. If it is needed to repair, please contact
qualified engineer to repair.
15 All cables can be connected or pull out only after power supply is turned off.
16 During a thunder rain weather, do not touch the power cord and antenna cable.
17 When the following troubles occur, please pull out the plug and call the professional engineers to repair.
A. The cable or plug is damaged.
B. The product was fallen down or the case is damaged.
C. Obvious abnormal situation occurs. In spite of correct operation according to the user manual but it still can't work
normally.
D. Some abnormal substances or liquid fall into it.
E. Unusual sound or smell sends out.
18 When the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.

19) The machine should not suffer from waterdrop or watersplash, do not place the vessel with water (or other liquids) on
it, for like this it is possibly to cause fire or electric shock.

20) The attaching plug should be inserted into the power point completely, otherwise it may cause spark to bring fire.

21) Please do not put candle, ash-tray, incense, inflammables or explosive nearby this machine.

22) Please do not stretch into any sharp object, metal or liquid, or touch the signal attachment or the inner of radiation
hole, in order to avoid short circuit and product damage, or possibly causing electric shock. Especially pay attention
when there are children on the spot.

23) Please don't use the machine immediately when moving the machine from low temperature place to high temperature
one, or install and use at the place of facing air conditioning, otherwise it may cause the condensation in the machine,
to cause fault.

24) Must be careful when moving this machine, avoiding being struck, especially pay attention to protect the screen part.
In addition, if using handcart, must note the injury as the product is overturned from the handcart because of hard
braking, overexerting and uneven ground.

Product Introduction

General information

Having inter high quality sound boxes, which will give you purely audiovisual enjoyment and save your table
place.
Having many ideal connectors, you may directly connect your DVD, vidicon etc. its disport components of
input connector let you enjoy beautiful image effect. The product can be used as a computer monitor with
VGA or HDMI connectors. Also it can be used as a TV machine when you insert the antenna.
Much faster response time will completely eliminate shadow of picture. seeing film and playing game may
be more fluent.
Enough colours can reach 16.7 millions kinds .
Wider viewing angle, higher brightness, higher contrast, lower consumption.
Intelligent image mode and sound mode can offer you intelligent audiovisual effect.
Built-in the latest digital comb filter, which makes image more clear. The internal 3D De-Interlace technique
can totally eliminate the screen dithering caused by interlace signals.
Own perfect timing functions, you can set time to turn off. It will be turned off in state of no signals, too.
Automatically operated convenient with telecontrol device.
Auto-setup function help you set the image to best performance in several seconds in PC mode.
Auto color balance adjustment technology takes your machine to the best color setting for all different kinds
of display adapters in PC mode.
Automatic denoise technique can greatly eliminate background noise caused by menu interference and the
noise caused by weak signals so as to make the picture on the screen clear.
Support USB interface, you can look through picture of JPG format and play music files of Mp3 format.

3

Features

interface specification:

4

Working Environment:

Atmosphere pressure: 86kPa 104kPa Temperature: 5 40 Humidity: 10% 85%

Storage Environment:

Atmosphere pressure: 86kPa 104kPa Temperature: -20 55 Humidity: 5% 95%

VGA

HDMI

CVBS Input/Output

S-VIDEO Input

YCbCr/Ypbpr

Audio Input/Output

TV(RF)

Earphone

Interface

Specification

DB-15, 75 0.5~0.7Vp-p H/V:TTL Level (Support mode refer to VGA Input Mode )

Video signal: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i

Audio: LPCM

48KHz, 44.1KHz, 32KHz, 24Bit, 20Bit, 16Bit

75 1Vp-p (PAL/NTSC/SECAM)

Y: 75 1Vp-p; C: 75 0.286Vp-p

Y: 75 1Vp-p; Cb/Cr: 75 0.7Vp-p

Signal mode: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i

20K , 0.5Vp-p

75 Imbalance

16~300 100mW+100mW

5

The Technical Specifications for Final Product The Technical Specifications for Final Product

Panel size

Max. Resolution

Best resolution

Pixel pitch

Active area

Color

Surface treatments

Power adapter

Volume

TV receive system

Unpacking Dimension(LHW)

Packing Dimension(LHW)

Net weight

Gross weight

Remote control range

Storage channels

23"

1920 1080

1920 1080@60Hz

0.2655mm 0.2655mm

509.76mm 286.74mm

Anti-glare

100-240V 60/50Hz

3W+3W

PAL+NTSC

557 396 64.5

115

16.7M

8m 30

199

/PAL+SECAM

mm

618 445 mm

5.5Kg

7.0Kg

VGA input mode

6

1

2

3

4

5

6

7

8

9

10

70

60

60

60

60

60

60

60

60

60

VGA

XGA

SXGA

WXGA

SVGA

WUXGA

720 400

640 480

800 600

1024 768

1280 960

1280 720

1280 1024

1360 768

1600 900

1920 1080

S/N

Mode Resolution

Refresh(Hz)

Note: Recommended mode: @60Hz1920 1080

Power supply: Comply with EPA standard,compatible with VESA DPMS standard.

Note: This specification is subject to change without notices. If there are differences between manual and real
operation, please do according to real operation.

Power LED indicator

Off

On

Mode

On

Standby

Power consumption

Listing

Please make sure that all of the following items are complete
LCD TV MONITOR (Include base)
User manual
Power cord
Remote control
If any of above listed items is missing, please contact your dealer or our service department.

Power cord

65W

1W

7

Installation & Connection

Power Connection

Plug one end of the power cord into the input port of the machine's power supply and then insert the other end into the
socket of the electrical source (

Notes:

1. When connecting the power cord, be sure to turn off the machine and other equipment's power.

2. If a long time at leisure, please disconnect it from power supply.

AC 100V-240V, 60/50Hz).

8

To power socket AC 100V-240V, 60/50Hz

Power switch