Thank you for using our LCD-TV. After unpacking, please check that you
have the following items: Operating instructions, Remote control, ACDC adapter, AC wire, and Batteries.
Before connecting the LCD-TV and turning the power on, please
read this book carefully. Please keep this book for later use. When it
was loss of function by electrostatic shock, please switch the on/off
button for restoring the function.
Incorrect usage will cause fire or electric shock. To prevent this, please do
as required when you are installing, using and cleaning this machine. To insure
your safety and extend the life-span of LCD-TV, please read the following items
carefully before using:
l Please read and understand all the instructions before operation;
l Please keep the book for later use;
l Please comply with the warning instructions on the machine and in this book
strictly;
l Please comply with the instructions provided;
l Please do not use additional devices that are not recommended by
manufacturer:
l Before operation, please make sure that the operating voltage of your unit is
normal;
l Do not place the unit on unstable, dusty and humid places;
l Never put the unit in direct sunlight or near heat sources;
l Allow enough space for proper ventilation;
l Please keep water away from the LCD-TV . If water comes in contact with the
LCD-TV, disconnect the power cord from the power source, then wipe the set
with a dry soft cloth;
l Do not remove the back cover. If services were need, please refer to qualified
Personnel
Main Functions
1-Can be connected with analog RGB input
2-Can be connected with CVBS,S-VIDEO , and SCART (CVBS/RGB)
input
3-Can receive TV signal
Front Panel Controls
7
6
12
43
675
5
1243
6
MENU PRVOL
5
12
G1 seriesD2 series
41235
TV/AV MENU VOL- VOL+ CH- CH+ POWER
Note: These buttons are on the top of the sets on these two series.
7
3
4
7
6
3
41235
TV/AV MENU VOL- VOL+ CH- CH+ POWER
7
6
7
6
TV/AV
2
4
Control Panel Function
1. MENU Press to select the main menu
2. VOL (V-/VOL-) Volume down / Left orientation to adjust the item in the OSD
VOL (V+/VOL+) Volume up / Right orientation to adjust the item/Press to
enter the submenu.
3. PR (P-/CH-) TV channel down / to select the item in the menu
PR (P+/CH+) TV channel up / to select the item in the menu
4.TV/AV Select the input signals: SCART/PC-RGB/AV/S-VIDEO/TV
5. Power supply switch
6. Power indicator
Illuminates red in standby mode, illuminates green when the display is
turned on
7.Remote Sensor Receiving remote control sends the infrared remote
signal.
Connection Options
The figure is just for referrence, please see the real.)
D-SUB Input
Connect to the D-SUB
15PIN analog output
connector of the PC
display card for PC
display purpose
Earphone port
DC IN
PC AUDIO IN
PC Audio Input
Connect the PC output
connector from a PC to
the audio input port
DC Power Cord Socket
This TV operates on DC power.
The voltage is indicated on the
Specifications page . Never
attempt to operate the TV on AC
power.
SCART Input
Connect to the DVD/
VCR/broadcasting
receiver or other
equipment
SCARTD-SUB IN
S-VIDEOHEADPHONE
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
AV Audio Input
Connect audio/video
output from an external
device to these jacks
L
R
AUDIOVIDEO
ANT
Antenna Input
Connect cable or
antenna signals to
the TV, either directly or through your
cable box.
Remote Control Key Functions
When using the remote control, aim it towards the remote sensor on the TV
SLEEP DISPLAY MUTE POWER
NICAM PC AUTO AD TV/AV
PSM.SSM
OKQ.VIEW
P+
V-V+
MENU
P-
INDEXTEXT
SUBCODE MIX
TIME HOLD SIZE REVEAL
Illustration of the keys on the remote control:
POWER
1.
2. MUTE
3. DISPLAY
4. 0-9
5. SLEEP
6. NICAM
7. OK
8.Q.VIEW
9. V-
V+
10. P+/P-
Power supply switch
MUTE
Display current input signal information
TV channel number select
Set time to change the TV into the standby status after a
period of preset time.(time is 240/180/120/90/60/45/30/15/0)
NICAM/A2 Stereo select
EXIT
Quick TV channel switch(return to the last channel)
Volume down / Left orientation to adjust the item in the OSD
Volume up / Right orientation to adjust the item/Press to
enter the submenu.
TV channel up/down or select the item of the menu
11. TV/AV
12. PSM
Select SCART/PC-RGB/AV/S-VIDEO/TV
Select picture mode: PERSONAL/STANDARD/MILD/FRESH
Remote Control Key Functions
13. PC
14. SS
M
28. AUTO AD
15. RED
PC-RGB system select
Select sound mode:VOICE/MUSIC/THEATRE/PERSONAL
Auto adjust (PC mode)
Correspond to the differently colored subjects
16. CYAN
17. GREEN
T
E
18.YELLOW
L
19. TEXT
E
T
E
20. HOLD
X
T
21. MIX
22.INDEX
23.SIZE
24.SUBCODE
25.TIME
Switch to the Teletext with text mode/turn off Teletext and
switch to TV mode
Hold on or off for current page display
Switch to the Teletext with mix mode
Request index page
Change display size
Sub coded page access
While in normal TV mode only, pressing the button TIME will
display the teletext time in the top right corner for a few
seconds.
26.REVEAL
27. MENU
Note:
The buttons instruction for the operation just take remote controller for example in this
manual . Buttons( MENU , V+/- or VOL or VOL+/-, P+/- or PR or CH+/-,
TV/AV,POWER or ) on the TV panel is corresponding with buttons ( MENU, V+/- , P+/- ,
TV/AV , POWER ) on the remote controller.
Reveal or hidden the hidden words
Press to select the main menu
Installing Batteries
1.Slide open the cover of the battery compartment on the back of the remote
control.
2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
1
2
3
Connection Instructions
Grounding
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gas pipes.
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
RF coaxial wire (75 ohm)
VHF antenna
UHF antenna
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
If the antenna needs to be split for two
TV s, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
NOTE: All cables shown are not included with the TV
Be careful not to bend the bronze
wire when connecting the antenna.
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.