TFT-LCD TV High Brightness & Contrast NICAM/A2 Stereo Sound
Please read this manual carefully before
using your television and keep this manual
in a safe place for future reference.
MODEL:TOM1003
To users:
Thank you for using our LCD-TV. After unpacking, please check that you
have the following items: Operating instructions, Remote control, AC/DC
adapter, AC Mains lead, and Batteries.
Before connecting the LCD-TV and turning the power on, please read
this book carefully. Please keep this book for later use. If the Tv stops
working it may be because of Electrostatic charge. Turn the set off
completely and wait a few moments before turning it on again.
The crossed out " Wheelie bin" is intended to show that this
appliance must no be placed with ordinary house hold waste.
When this appliance has reached the end of its useful life. It
must be disposed of in accordance with local by-laws. Consult
your local waste disposed authority.(WEEE Directive)
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
"DO NOT LEAVE YOUR TV IN STAND-BY OR OPERATING WHEN YOU LEAVE THE HOUSE”
RISK OF ELECTRIC SHOCK
Incorrect use may cause fire or electric shock. To prevent this, please do as
required when you are installing, using and cleaning this machine. To insure
your safety and extend the life-span of LCD-TV, please read the following items
carefully before using:
Please read and understand all the instructions before operation;
l
Please keep the book in a safe place for later use;
l
Please comply with the warning instructions on the Tv and in this book strictly;
l
Please do not use additional devices that are not recommended by
l
manufacturer:
Before operation, please make sure that the mains supply corresponds to the
l
operating voltage of your Tv.
Do not allow the DC lead to become damaged or trapped, place it so that it
l
cannot be tripped over or stepped on.
Do not place the unit on an unstable surface.
l
Do not allow to get dusty or wet.
l
Never put the unit in direct sunlight or near heat sources;
l
Allow enough space for proper ventilation;
Please keep water away from the appliance. If water comes into contact with
l
the LCD-TV, disconnect the power cord from the power source, then wipe the set
with a dry soft cloth; DO NOT OPERATE UNTIL CHECKED BY AN AUTHORISED
TECHNICIAN
Do not remove the back cover. There are NO user serviceable parts inside.
l
The warranty will be invalid if the back cover is removed. If serviceis required,
please refer to a qualified technician.
Main Functions
1- May be connected to an analog RGB PC Output (VGA)
2- May be connected with CVBS,S-VIDEO , and SCART (CVBS/RGB)
inputs
3- Receives Terrestrial Analog TV signals
Front Panel Controls
12345
TV/AV MENU VOL- VOL+ CH- CH+ POWER
7
6
Control Panel Functions
1.TV/AV Select the input signals: SCART/PC-RGB/AV/S-VIDEO/TV
2. MENU Press to select the main menu
3. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL + Volume up / Right orientation to adjust the item/Press to
enter the submenu.
4. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
5. Power supply switch
6. Power indicator
Illuminates red in standby mode, illuminates green when the display is
turned on
7.Remote Sensor Receiving remote control signals from the
Remote Control Handset
Connection Options
The figure is just for referrence, please see the real.)
D-SUB Input
Connect to the D-SUB
15PIN analog output
connector of the PC
display card for PC
display purpose
Earphone port
DC IN
PC AUDIO IN
PC Audio Input
Connect the PC output
connector from a PC to
the audio input port
DC Power Cord Socket
This TV operates on DC power.
The voltage is indicated on the
Specifications page . Never
attempt to operate the TV on AC
power.
SCART Input
Connect to the DVD/
VCR/broadcasting
receiver or other
equipment
SCARTD-SUB IN
S-VIDEOHEADPHONE
S-Video Input
Connect S-Video output
from an S-Video device
to the jacks.
AV Audio Input
Connect audio/video
output from an external
device to these jacks
L
R
AUDIOVIDEO
ANT
Antenna Input
Connect cable or
antenna signals to
the TV, either directly or through your
cable box.
Remote Control Key Functions
When using the remote control, aim it towards the remote sensor on the TV
SLEEP DISPLAY MUTE POWER
NICAM PC AUTO AD TV/AV
PSM.SSM
OKQ.VIEW
P+
V-V+
MENU
P-
INDEXTEXT
SUBTITLE MIX
TIME HOLD SIZE REVEAL
Illustration of the keys on the remote control:
POWER
1.
2. MUTE
3. DISPLAY
4. 0-9
5. SLEEP
6. NICAM
7. OK
8. Q.VIEW
9. V-
V+
10. P+/P-
Power supply switch
MUTE
Display current input signal information
TV channel number select
Set time to change the TV into the standby status after a
period of preset time.(time is 240/180/120/90/60/45/30/15/0)
NICAM/A2 Stereo select
EXIT
Quick TV channel switch (return to the last channel)
Volume down / Left orientation to adjust the item in the OSD
Volume up / Right orientation to adjust the item/Press to
enter the submenu.