Please read this manual carefully
before using this TV set and keep it
for future reference.
WARNING AND CAUTION
CAUTION
!!
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.FOR
ANY PROBLEM, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE:
THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE.
IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY
INSIDE PART OF THIS PRODUCT.
THERE IS A EXCALMATION MARK IN THE TRIANGLE: THIS
SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING. OPERATION AND MAINTENANCE HAS BEEN
INCLUDED WITH THIS PRODUCT.
RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK
DO NOT OPENDO NOT OPEN
!!
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE,
DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY.
DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY
SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT
WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORIZED
AND COULD LEAD TO INJURY OR PRODUCT DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8) Do not install near any hear sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purposes of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10) Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11) Only use the attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long
periods of time.
14) Refer all serving to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
To users:
Thank you for our LCD-TV. purchasing
Before connecting the LCD-TV and turning on the power, please
read this book carefully. Please keep this book for later use.
If the unit is disabled by an electrostatic discharge, please turn off
the power to the unit and turn it back on to reset.
Incorrect usage may cause fire or electric shock.
required when you are installing, using and cleaning this machine. To insure your
safety and extend the life-span of LCD-TV, please read the following items
carefully before using:
l Please read and understand all the instructions before operation;
l
Please keep this manual for later use;
l
Please comply strictly with the warning instructions on the machine and
in this book;
l Please comply with the instructions provided;
l Please do not use additional devices that are not recommended by
manufacturer:
l
Before operation, please make sure that the operating voltage of your unit is
correct;
l Do not place the unit on unstable, dusty and humid places;
l Never put the unit in direct sunlight or near heat sources;
l Allow enough space for proper ventilation;
l Please keep water away from the LCD-TV . If water comes in contact with the
LCD-TV, disconnect the power cord from the power source, then wipe the set
with a dry soft cloth;
l
Do not remove the back cover. If service is needed, please contact an
Authorized service technician.
To prevent this, please do as
Front Panel Controls
L1510A
L2310A
2345
TV/AV MENU VOL- VOL+ CH- CH+ POWER
7
6
1
4
5
2
L1910A
6
7
4
5
3
167
Control Panel Function
1. Power supply switch
2.TV/AV PC/COMPONENT/AV/SV/TV
3. MENU Press to select the main menu
4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item/Press to enter
5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
6. Power indicator
Illuminates red in standby mode, illuminates green when the
display is turned on
7.Remote Sensor
Selects the input signals:
/blue
Receives the signals from the remote control
Connection Options
L1510A/L1910A
ANT IN
PC AUDIO IN
R
AUDIO IN
L
VIDEO IN
V
S-VIDEO
Pr Y
COMPONENT IN
Pb
VGA IN
The figure is just for reference, please see the actual unit. )
AV /S-VIDEO/COMPONENT Audio Input
Connect audio
output from an external
device to this jack
Earphone port
DVD/DTV Input
Connect a component video/audio
device to these jacks
ANT IN
PC Audio Input
Connect the PC output
connector from a PC to
the audio input port
Antenna Input
Connect cable or
antenna signals to
the TV, either direcÂtly or through your
cable box.
PC AUDIO IN
R
L
AUDIO IN
V
VIDEO IN
S-VIDEO
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
Video Input
Connect video
output from an external
device to this jack
Pb
Pr Y
COMPONENT IN
VGA Input
Connect to the VGA
15PIN analog output
connector of the PC
display card for PC
display purpose
VGA IN
Connection Options
L2310A
Pb
Pr Y
COMPONENT IN
(The figure is just for referrence, please see actual unit. AC power supply switch button is on the back )
PC AUDIO IN
VGA IN
AV /S-VIDEO/COMPONENT Audio Input
Connect audio
output from an external
device to these jacks
DVD/DTV Input
Connect a component video/audio
device to these jacks
L
AUDIO IN
R
V
VIDEO IN
S-VIDEO
ANT IN
Antenna Input
Connect cable or
antenna signals to
the TV, either direcÂtly or through your
cable box.
Pb
COMPONENT IN
Pr Y
VGA IN
PC AUDIO IN
PC Audio Input
Connect the PC output
connector from a PC to
the audio input port
VGA Input
Connect to the VGA
15PIN analog output
connector of the PC
display card for PC
display purpose
R
L
AUDIO IN
V
VIDEO IN
S-VIDEO
Earphone port
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
Video Input
Connect video
output from an external
device to this jack
ANT IN
Remote Control Key Functions
When using the remote control, aim it towards the remote sensor on the TV
12
34
5
78
910
12
1314
15
MUTE
RECALL DISPLAY EXIT
123
456
789
MTS/SAPP.STD
0
MENUTV/AV
CH+
VOL
-
CCDSLEEP SCAN
CH-
VOL
+
Illustration of the keys on the remote control:
1. MUTE
2.
3. RECALL
4. EXIT
MUTE
Power supply switch
Quick TV channel switch(return to the last channel)
Menu exit
6
11
5. DISPLAY
6. 0-9
7. MTS/SAP
8. P.STD
9. MENU
10. TV/AV
11. CH+/CH-
12. VOL+
Display current input signal information
TV channel number select
Select MONO,STEREO, SAP in NTSC system
Select picture mode: PERSONAL/STANDARD/MILD/FRESH
To display/exit the main menu
Select PC/COMPONENT/AV/SV/TV
TV channel up/down or select the item of the menu
Volume up / to select the main menu/ to adjust the item/ to
enter the submenu.
VOL-
13. CCD
14. SCAN
15. SLEEP
Volume down / to select the main menu/ to adjust the item
Closed caption on/off
Channel scan
TV sleep button
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.