Haier HWR12XC5, ESA3125L, ESA3125, ESA312, ESA3105 Owner’s Manual

0010551962

TEMP/TIME

MODE SPEED TIMER

ON/OFF

HWR12XC5,ESA3105,ESA3125,HWR18VC7

(ESA3105/ESA3125 Only)

1

English

2

English

3

1
1
2
4
4
5
5

6-7

8-12

8

8-12

13-18

14
14

15-18

19-20

20-21

22

English

4

English

5

English

6

English

1.Thermostat

This allows you to adjust the temperature of
the air--the lower the setting,the cooler the air
temperature. With this you can set the
temperature to your desired comfort level. You
can set the temperature between 61oF and
86o F.

2.Fan Speed

With this you can control the fan speed as well
as the A/C (cooling) speed.
You have 3 levels of A/C Speed to set at your
desired level. LO will circulate air at the lowest
velocity, MED at medium velocity and HIGH
will circulate at the maximum, velocity. You
have 3 levels of Fan Speed to set at your
desired comfort level: HIGH, MED and LOW.

3. Function

Your air conditioner has 4 Functions.
a) COOL
Here the air conditioner will operate the
compressor and the desired fan speed set to
give you cold air for your comfort.
b) FAN
You can run the fan without the AC function
on cooler days. The fan can be set to run at
3 speeds as desired.

c) DEHUMIDIFY
This enables your air conditioner to operate
as a dehumidifier as well. It will remove the
excess moisture from the air to keep your room
at a comfortable, dry stage. You can use this
feature alone in case you do not wish to use
the air conditioner.
d) ENERGY SAVER
When this feature is "On" , the fan will shut
off three minutes after the compressor cycles
off. This will reduce energy consumption and
noise. When the compressor turns back on,
the fan will turn on at the same time. In the
"Off" position, the fan will not shut off when
the compressor cycles off.

4.Timer

Your air conditioner can be set to go on or off
at your desire. This can be programmed up
to 24 hours in advance.

5.4-Way Air Flow

The air directional louvers let you control the
direction of the airflow to the desired direction.
The airflow can be directed up-down-right
side-left side.