HWMP55-918
Automatic Washing Machine User manual
This manual is for
HWMP55-918
HWMP65-918
Please read this manual
carefully before using.
Retain for future
reference.
CONTENTS
Product Overview
Safety Precautions 2-3
Installation and Adjustment 4
Installation 5
Installation water inlet hose 6
Before washing 7
Loading your laundry 8
Detergent
Operation & Wash Cycles
Maintenance 1
Trouble-shooting 15
Packing list 17
Specifications 18
of drainage hose
of
usage guide
8
9-13
1
4
Product Overview
Top lid
Detergent box
Lint filter
(HWMP55-918)
Balance ring
Inner tub
Pulsator
Control panel
Cabinet
Fixed leg
Adjustable leg
Description of symbols
Contents marked with this symbol are related to the
Warning sign
safe use of the product and the personal safety of the
user. Please operate in accordance to the contents of
this manual, to avoid harm to the user or damage to the
machine itself.
Cold water valve
Power cord
Lint filter
(HWMP65-918)
Back
cover
Drain connector
Back cover
Hot water valve
Handle
Drainage
hose
Forbidden sign
Contents marked with this symbol indicate operations
or actions that should not be undertaken by the user.
Performing of such actions may result in injury to the
user or damage to machine itself, and void warranty.
SAFETY WARNING
Please check power socket condition to ensure it has been earthed
correctly prior to installation to ensure your safety
1
Safety Precautions
A separate, earthed power socket is
required for the power supply. Hold the
plug - NOT the electric cable - when
unplugging the washing machine. Do
not insert or remove the power plug
with wet hands.After installation of the
washing machine, the power plug
should be accessible.
If power cord or other parts of this
machine become damaged or
faulty, please contact a technician
to have it repaired. DO NOT
attempt repairs yourself as this
may cause personal harm or
void warranty.
Do not install this appliance in a damp
or wet environment. Do not leave wet
laundry on the Control Panel or spray
water directly on to this appliance, as
this may cause the washer to
malfunction
or cause an
electrical
fault.
Ensure the plug is removed and the
taps turned off in the following cases:
Power failure, cleaning, moving,
installation and when not in use.
Do not connect to hot water higher
than 50 C temperature
o
Do not block the ventilation holes with
carpet. Ensure carpet does not obstruct
the opening under the base of the
cabinet
Back
Front
The ventilation
holes at the bottom
Soft object
Do not wash water-proof clothing
as this may affect load balance
during spin cycle(s)
If you are using an extension cord or a portable
electrical outlet device (not recommended),
ensure that it is positioned so that it does not
come into contact with water or moisture
Safety precautions
Do not attempt to move washing or
place hands inside washing machine
while in operation. Please ensure
children are supervised around
machine to avoid harm.
Do not leave hot or heavy items on lid
or control panel as this may cause
damage to the washer or make the
washer
unsafe to
operate
This clothes washer is not intended for use
by children and persons with reduced
physical,sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
If power cord or other parts of this machine become damaged or faulty, please
contact a technician to have it repaired. DO NOT attempt repairs yourself as
this may cause personal harm or void warranty.
Please remove items such as coins,
buttons, sand and other solid materials
from clothing before washing.
Do not wash laundry with chemicals
or other volatile materials (such as
petrol, solvents or thinners) as this
may cause damage
to the machine.
Keep washer away from heat
sources such as heaters, stoves or
direct sunlight.
Check that water faucets are open
after connection to machine, prior
to operation and that pipes are
connected correctly.
Please use low suds/High
Efficiency washing powder.
3
Installation & Adjustment
Please install and adjust the machine according to the directions contained
in this manual. It is very important to follow these directions for the safe
operation of the machine, and to ensure your machine operates correctly.
Install the lint filter
After removing washer from outer packaging, take
out the lint filter from the document bag, install it to
the inner tub. See the figure opposite
Please ensure the lint filter is installed correctly and
maintained in good condition to ensure the water outlet is
not blocked or the flow altered. If the lint filter is lost or
damaged, contact Customer Care.
Install the bottom plate
The purpose of the bottom plate is to suppress noise
from the washing machine during operation.
Steps:
1. Lay the washer on its back, on a non-abrasive
surface.
2. Place the plate on to the bottom of the machine.
3. Use a screwdriver to tighten the screws ( in
accessory bag) securing the panel to bottom of
the washer.
4. Once all screws are tight and the panel is
secure, return the washer to its standing
position.
Front
Back
Cparpet
Model HWMP55-918
Inner tub
Model HWMP65-918
Install
Up
Dismantle
Down
Two fasteners
Bottom plate
Lint filter
Screw
Balance washing machine
Do not install this machine on an incline greater than 2° . Installing machine on an
angle or on rough ground will result in unstable running or stoppage of the
machine. Please adjust it by the following method:
1.Confirm it is level£»
2.Lift up the side of the leg slightly and twist the adjustable leg.
Note:The distance between the washing machine
and wall:at least 20 mm.
20mm
High
Low
4
20mm
Loading...