Haier HWM90-D0658 User Manual

Computerized Automatic

Saving Water Washing Machine

User's manual

This manual is for

HWM90-D0658

Please read this manual carefully before using. Retain it for future reference.

W

0030806966A

 

CONTENTS

Names of the parts

1

Safety precautions

2

Installation and adjustment

4

Install the water inlet hose

5

 

Preparation

before washing

7

Put in the laundries

8

Put in the detergent

8

Close the top lid

9

Use the operation buttons

9

Finish washing

12

Disposal after washing

14

Trouble-Shooting *Answer to question

15

Packing list

*Specification

16

Na es of the parts

Wash tub cover

 

 

Control panel seat

Top lid

 

 

 

Tub

Back control board

 

Lint filter Installed by user)

Power cord hook

Control panel film

 

Water absorption gasket

Pulsator

Lint Filter

 

 

Water inlet valve

 

Inner tub

Cabinet

Hook of fixing the drain hose

 

 

Cabinet handle

Drain hose

 

 

Back cover

 

Pulsator

Power cord

 

Decoration label

Base frame

 

 

Meaning and description of the symbols

Warning sign Contents marked with that symbol are related to the safety

of the product and the personal safety of

the users.

Please

operate in strict conformity to the contents, otherwise

it may

cause damage of the machine or injure

the personal safety

of the user.

 

 

Forbidden sign Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user.

1

Safety precautions

Please plug the plug on special 220V AC receptacle. Be sure to use single-phase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible.

In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hang. Be sure to pull the plug off and close the water faucet when occurring power failure, delivering the machine, setting the machine idle or cleaning the machine, do not plug or pull the power plug with wet hand.

Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp it with heavy items. If the power cord and power plug are bad, or the receptacle is loose, be sure to have it replaced by the technicians of our special shop or our agent, or the after-sales service department to avoid any risk. Keep the prong of the power plug clean. If dust is found on the power plug, please wipe it off with dry cloth.

In case the washing machine is installed on ground Do not use water with temperature higher than 50 with carpet, be careful not to block the ventilation hole

with carpet.

The ventilation

 

holes at the bottom

Soft items

 

Do not put the machine at damp place like the bathroom. Never wash it with water. Do not

put wet laundries on the front control panel board.

Do not wash water-proof laundry like the raincoat, bike-covers, down textiles etc. To avoid abnormal vibrations in spinning and damages to the laundries-

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

21

Haier HWM90-D0658 User Manual

Safety precautions

·Do not put hand into the rotating tub. It is dangerous

· Do not decompose, repair or alter the machine by

even if the rotation speed is slow. Take special care of

yourself.

the children. Keep children away from the washing

 

machine to avoid them climbing on.

 

·Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine.

·Do not wash laundry with volatile materials

(such as thinner, petrol etc.).

Petro

l

 

Thinner

·The Handicappedor ChildrenWithoutCareShall Not

use the machine.

Please keep the lint filter in good condition, and install it to proper position during washing. If the lint filter is lost or damaged, please contact the local after-sales service department of our company.

·Keep the machine away from direct sunlight and heat source like the heater.

To protect your laundries and washing machine, please take out all of the coins, buttons, sand, hairpin and other foreign materials before washing.

dismantle

install

·Please check if the water faucet is open, and if the

 

 

connection of the water inlet pipe is proper.

 

 

·It is suggested to use foamless washing powder.

3

Installation and adjust ent

Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.

Install the lint filter

After opening the package, please take out the lint filter from the document bag, install it to the overflow

filter of the wash tub. See to the figure.

Overflow filter

Lint filter

Install the bottom plate

After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with five screws by a cross screw driver, then lift the machine up gently. See to the figure:

Front

Back

Screw Bottom plate

Soft items

Usage the drain hose

The drainage shall be smooth with the drain hose.

1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid

way.

2.Do not step on or press the drain hose.

<10cm

4.If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m.

>30mm

<1.5m

3. If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly.

5.If the extra hose is too long, cut it either at A or at B point.

AB

4

Loading...
+ 12 hidden pages