Haier HWM90-23BS, XPB90-23BS User Manual

Twin-tub Washing Machine

User's manual

This manual is for

HWM90-23BS

Special number:

0030502925

Please read this manual
carefully before using.
Retain it for future reference.

Contents

Safety precautions

Installation and adjustment

Preparation before washing

The musts in washing

Usage of the detergent

Washing sequence

Disposal after washing

Packing list *Specification

Names of the parts

Trouble-Shooting Answer to question

Installation of the major function

1

Meaning and description of the symbols

Warning sign

Forbidding sign

Contents marked with that symbol are related
to the safety of the product and the personal
safety of the users. Please operate in strict
conformity to the contents, otherwise it may
cause damage of the machine or injure the
personal safety of the user.

Contents marked with that symbol are actions
forbidden to perform. Performing of those
actions may result in damage of the machine
or injure the personal safety of he user.

Please check if the power receptacle has good earthing
condition before using to guarantee your safety.

Names of the parts

Water-filling entrance

Wash tub cover

Outer cover of the spin tub

Spin tub frame

Spin tub

Cabinet

Wash selector

Wash timer

Control panel

Filter frame

Chassis

Cascade outlet

Water-filling entrance cover

Water-filling entrance

Spin timer

Power cord

Water inlet selector handle

Inner cover of the spin tub

Waterproof cover

2

Safety precautions

Please insert the power cord into
special receptacle with rated vol­tage.Be sure to use single-phase
three pins receptacle.The earthing
terminal of the receptacle must be
earthed reliably.If possible,please
adopt electric leakage protector.

When the machine is normally
using, please put the power plug
at the location easily to be insert­ed and extracted by hand. Be sure
to pull the plug off when there's
power failure, or the machine is
being moved, cleaned orwhen it
is idle.

If the power cord is bad, to avoid risk it is required to replace it by the
technicians ofour special shop or the after-sale service department.
Keep the pin of the power plug clean.

Earth

Do not put the machine at damp
place like the bathroom . Never
wash it with water. Do not place
wet laundries on the control panel.

Do not use water hotter than 50 C .

In case the washing machine is installed
on ground with carpet , do not block the
ventilation hole with carpet.

Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.

Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.

Ventilation hole at
the bottom of the
washing machine

3

Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.

Safety precautions

Do not put any hot or heavy items
( such as the kettle with hot water )
on the washing machine.

Do not decompose, repair or alter the
machine by yourself.

Handicapped or children without care
shall not use the machine.

Keep the machine away from direct
sunlight and heat source like the
heater.

Do not wash laundries with volatile
materials (such as thinner, petrol etc.).

P

etrol

Th

inner

To protect your laundries and wash­ing machine, please take out all of the
coins, buttons, sand, hairpin and
other foreign materials before washing.

Please check if the water faucet is open,
and if the connection of the water inlet
pipe is proper.
It is suggested to use foamless washing
powder.

4

Installation and adjustment

Please install and adjust the machine according to the requirement of
the manual. It is very important to your security and correct operating
the machine.

Install the water inlet hose; Select the water level

Use the new water inlet hose provided with the
machine to connect to the water faucet.
Old hose sets should not be reused.

Usage of the drain hose

Water inlet hose

Water-filling
entrance

Maximum

Max

(About 79L)

Medium

(about 66L)

Minimum

(About 48L)

Medium

Min

Water-filling
entrance cover

The drainage shall be smooth with the drain hose.

4.If extra drain hose is needed , the inner
diameter of the extra hose shall not less
than 30mm, and the length shall not exceed

1.5m.

<10cm

> 30mm

<1.5m

1.The height of the drain hose shall be
less than 10cm , or the drainage will
not be smooth enough and cause
incomplete drainage.

2.Do not step on or press the drain hose.

3 If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.

Attention:
In water filling, do not exceed
the"Maximum" water level. Otherwise
the water may overflow out of the
washing machine.

Select water level according to the
quantity of the laundries.

Insert the water inlet hose into the water-filling
entrance on the control panel directly. (pull it
out to dismantle it)

Install the lint filter

After openning the package,please take out the lint
filter from the document bag,install it to the filter frame
of the cabinet.See to the figure.

Filter frame

Lint filter