Haier HWM80-0626S User Manual

Twin-tub Washing Machine

This manual is for

HWM80-0626S
HWM80-0626SH

User's manual

Please read this manual
carefully before using.
Retain it for future reference.

0030807884

Contents

Names of the parts

Safety precautions
Installation and adjustment

Preparation before washing

The musts in washing

Usage of the detergent

Washing sequence

Disposal after washing

Trouble-Shooting *Answer to question

Packing list *Specification

Names of the parts

Wash tub cover

Drain selector

Program selector

Wash timer

Control panel seat

Water-filling entrance

Control panel

Plate support (left)

Water filling control handle

Bypass channel

Water level adjust lever

Overflow filter

Lint filter

Drain hose

Cabinet handle

Wash tub

Cabinet

Base frame

Notes: All illustrations in this Manual are given for reference only. Your products and
accessories may show differences from these illustrations due to our
continuous improvement.

Meaning and description of the symbols

Outer cover of the spin tub
Inner cover of the spin tub

Spin timer

Plate support(right)

Spin tub frame
Spin tub

Front door

Power cord

Pulsator

Warning sign

to the safety of the product and the personal
safety of the users. Please operate in strict
conformity to the contents, otherwise it may
cause damage of the machine or injure the
personal safety of the user.

Contents marked with that symbol are related

Forbidding sign

Contents marked with that symbol are actions
forbidden to perform. Performing of those
actions may result in damage of the machine
or injure the personal safety of he user.

Please check if the power receptacle has good earthing condition
before using to guarantee your safety.

1

Safety precautions

Please insert the power cord into special
receptacle with rated voltage. Be sure to
use single-phase three pins receptacle.
The earthing terminal of the receptacle
must be earthed reliably. If possible,
please adopt electric leakage protector.

When the machine is normally using,
please put the power plug at the
location easily to be inserted and
extracted by hand. Be sure to pull the
plug off when there's power failure, or
the machine is being moved, cleaned
or when it is idle.

Do not bend ,extend, twist, bind by force. Do not press or nip it with weight.
Keep the pin of the power plug clean, if the power plug is polluted with dust,
please wipe with dry cloth carefully.
If the power cord or the power plug is bad, to avoid risk it is required to have

it replaced by the technicians of our special shop or the after-sale service
department.

Do not put the machine at damp
place like the bathroom . Never wash
it with water. Do not place wet laundries
on the control panel.

Do not use water hotter than 50 C .

In case the washing machine is installed
on ground with carpet , do not block the
ventilation hole with carpet.

Ventilation hole at
the bottom of the
washing machine

Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.

Do not wash water-proof laundries like
the raincoat, bike covers etc, to avoid
abnormal vibrations in spinning.

2

Safety precautions

Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.

Do not put any hot or heavy items
( such as the kettle with hot water )
on the washing machine.

Handicapped or children without care
shall not use the machine.

Do not decompose, repair or alter the
machine by yourself.

Do not wash laundries with volatile
materials (such as thinner, petrol etc.).

ol

ner

Petr

in

h

T

Keep the machine away from direct
sunlight and heat source like the
heater.

Please keep the lint filter in good condition, and
install it to proper position during washing. If the
lint filter is lost or damaged, please contact the local
after-sale service department of our company.

3

Dismantle

Install

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is

very important to your security and correct operating the machine.

Usage of the drain hose

The drain hose shall drain smoothly

1.The height of the drain hose shall be

less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.

2.Do not ramp or press the drain hose.

3.If the drain hose is too long, cut it at mid

point. To make smooth drainage, cut the
front end of the hose slantingly.

<10cm

4.If extra drain hose is needed, please

make separate purchase. The inner
diameter of the extra hose shall not
less than 40mm, and the length shall
not exceed 1.5m.

If the extra hose is too long, cut it
either at A or at B point.

> 30mm

<1.5m

BA

4