Haier HWM8000 User Manual

Fuzzy Computerized Automatic
Washing Machine

This manual is for

HWM8000

User's manual

Please read this manual
carefully before using.
Retain it for future reference.

0030805704B

Contents

Names of the parts
Safety precautions

Installation and adjustment

Usage of the drain hose

Installation the water inlet hose
Preparation before washing

Put in the laundries

Add the detergent and softener

Use the operation knobs and buttons

Close the top lid

Finish washing
Disposal after washing

Trouble shooting * Answer to question

Packing list Specification

*

Names of the parts

Top lid A

Top lid B

Detergent box

Control panel

Level meter

Lint filter(Installed by user)

Filter cover

Control panel
film

Front control
board

Pulsator

Cabinet

Adjustable foot

Drier outlet
cover

Power line

Inner tub

hanging hole
for the drain
hose

back cover

Adjustable foot
seam

Meaning and description of the symbols

Contents marked with that symbol are related

Warning sign

to the safety of the product and the personal
safety of the users. Please operate in strict
conformity to the contents, otherwise it may
cause damageof the machine or injure the
personal safety of the user.

Cool water valve

Warm water valve

Back faceplate

Cabinet handle

Drain hose

Front fixed
foot

Rear fixed foot

Forbidding sign

Contents marked with that symbol are actions
forbidden to perform. Performing of those
actions may result in damage of the machine
or injure the personal safety of the user.

Please check if the power receptacle has good earthing condition
before using to guarantee your safety.

1

Safety precautions

Please insert the power cord into special
receptacle with rated voltage.Be sure to
use single-phase three pins receptacle.
The earthing terminal must be earthed
reliably.If possible,please adopt electric
leakage protector.

Do not bend, stretch, twist, bind the power cord by force,
or reform it. Do not press or clamp it with heavy items. If the
power cord and power plug are bad, or the receptacle is loose,
be sure to have it replaced by the technicians of our special shop
or our agent, or the after-sale service department for the sake
of avoiding any risk. Keep the prong of the power plug clean.
If dust is found on the power plug, please wipe it off with dry cloth.

In case the washing machine is installed on
ground with carpet, be careful not to block the
ventilation hole with carpet.

The ventilation
holes at the
bottom

In normal usage of the washing machine,
the power plug shall be ready to be pulled
or plugged with hand. Be sure to pull the
plug off and close the water faucet in
following cases: power failure, delivering
the machine, setting the machine idle or
cleaning the machine. Do not plug
or pull the power plug with wet hand.

Do not use water with temperature
higher than 50 inside the tub.

Do not set the machine at damp place
like the bathroom. Never wash it with water.
Do not put wet laundries on the control
panel coating.

Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or the
plugging into the receptacle is loose, do not use it any
more.

Do not wash water-proof laundries like
the raincoat, bike covers, down textiles etc.
to avoid abnormal vibrations in spinning and
damaging the laundries.

2

Safety precautions

Do not put hand into the rotating tub. It is
dangerous even if the rotation speed is slow.
Take special care of the children. Keep
children away from the washing machine
to avoid them climbing on it.

Do not put any hot or heavy items
(such as the kettle with hot water) on the
washing machine.

The handicapped or children shall not
use the machine without care.

Do not decompose, repair or alter
the machine by yourself.

Do not wash laundries with volatile
materials (such as thinner, petrol etc.).

Keep the machine away from direct
sunlight and heat source like the heater.

To prevent the lint in the tub from blocking
the cascade outlet and influencing the
cascade effect, please keep the lint filter
in good condition, and install it to proper
position during washing. If the lint filter is
lost or damaged, please contact the local
after-sale service department of our
company.

To protect your laundries and washing
machine, please take out all of the coins,
buttons, sand, hairpin and other foreign
materials before washing.

Please check if the water faucet is open, and if
the connection of the water inlet pipe is proper.
It is suggested to use foamless washing powder.

3

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual, which is very
important for you to operate the machine safely and properly.

Install the bottom plate

After opening the package, please lean the

washing machine gently down on soft items

(like towel cloth, blanket, etc.). Install the

bottom plate to the bottom of the machine

with eight screws by a cross screwdriver,

then lift the machine up gently. See to the

figure:

Adjust the installation position

The largest allowable slope of the shank base
of the machine is 2 . The slanting or rough
ground will result in unstable running or
stoppage of the machine. Please adjust it with
following methods:

Bottom plate

Screw

Back

Front

Soft item

Confirm it's horizontal:

If the bulb of the level meter at the balance display
position is inside the standard circle, it indicates that
the machine is horizontal. Otherwise you need to
adjust the adjustable leg of the machine.

Adjust the adjustable leg:

1.To twist the adjustable leg, please first lift up the
leg side slightly, loosen the adjustable nut, and
then twist the leg.

2.After adjustment, fasten the nut.

4

Air bubble

Suitable Not suitable

Standard circle

Loosen

High

Fasten

Low

Adjustable nut

Adjustable leg