Haier HWM65-1128NZP, HWM75-1128NZP User Manual
Double Drive
Fully Automatic Washing Machine
User’s manual
HWM65-1128NZP
HWM75-1128NZP
Please read this manual carefully before using.
Retain it for future reference.
2
Names of the parts ...................................................................3
Safety precautions ....................................................................4
Installation and adjustment .......................................................6
Install the water inlet hose ........................................................9
Preparation before washing ....................................................11
Put in the laundries .................................................................12
Use the operation buttons .......................................................13
Disposal after washing ............................................................17
Trouble-shooting answer to question ......................................18
Packing List ............................................................................19
Specifications .........................................................................19
Contents
3
Names of the parts
Meaning and description of the symbols
Water absorption gasket
Power cord
Back cover
Fixed foot
Cabinet handle
Drain hose
Top lid component
Inner cover
Detergent box
Inner tub
Outer tub cover
Balance ring
Control panel seat
Hook
Filter cover
Pulsator
Lint lter
Front control board
Adjustable foot
Cabinet
Adjustable foot label(2 pieces)
Base frame
Water inlet valve
Warning sign Contents marked with that symbol are related to the safety of the
product and the personal safety of the users. Please operate in
strict conformity to the contents, otherwise it may cause damage
of the machine or injure the personal safety of the user.
Forbidden sign
Contents marked with that symbol are actions forbidden to
perform. Performing of those actions may result in damage of the
machine or injure the personal safety of the user.
4
Safety precautions
Please plug the plug on special
receptacle
with rated voltage. Be sure to use
singlephase three pins receptacle.
Ensure the earthing prong of the power
receptacle is earthed reliably. Use
leakage protector if possible.
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle, when
moving the machine, or when cleaning the
machine. Do not use wet hand to insert or
pull out the power plug.
Do not bend ,extend, twist, bind by force. Do not press or nip it with weight. ●
Keep the pin of the power plug clean, if the power plug is polluted with dust, ●
please wipe with dry cloth carefully.
If the power cord or the power plug is bad, to avoid risk it is required to have ●
it replaced by the technicians of our special shop or our customer care agent.
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Carpet
The ventilation holes
at the bottom
Do not use water hotter than 50 °C .
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.
5
Please keep the lint lter in good condition,
and install it to proper position during
washing. If the lint lter is lost or damaged,
please contact the customer
care agent of our company.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
To protect your laundries and washing
machine, please take out all of the
coins, buttons, sand, hairpin and
other foreign materials before
washing.
Please check if the water faucet is open, and if the connection of the water inlet pipe is
proper.
It is suggested to use foamless washing powder.
To change the direction of drain pipe, please contact the customer care agent of our
company.
Please don’t use the washer in the environment below 0°C; if the washer has been
stored below 0°C, please be sure to ensure the washer is placed under the room
temperature for 2~4 hours and then use otherwise the washing effects may be
lowered or the washer may be damaged.
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such as
the kettle with hot water) on the washing
machine.
Petrol
Thinner
Install
Dismantle
Do not put hand into the rotating tub. It is
dangerous even if the rotation speed is slow.
Take special care of the children. Keep
children away from the washing machine to
avoid them climbing on.
This appliance is not intended for
use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge,
unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
6
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
1. Open the top lid of the washing machine.
2. Put the inner cover component on the outer tub cover, aiming the inner cover shaft to
the installation hole of the corresponding outer tub cover shaft groove.
3. Firstly insert the inner cover shaft of one side into the corresponding outer tub cover
shaft groove, then push the another inner cover shaft into the corresponding outer
tub cover shaft groove. Please install to designated position to guarantee there are
no dropping or abnormal sound in opening and closing of the inner cover, and the
operation shall be smooth. Do not dismount the inner cover component after washing.
After you open the package, please lean the washing machine gently down on soft items
(like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of the machine with the eight screws by a cross
screwdriver, then lift the machine up gently. See to the figure:
Install the inner cover component
Install the bottom plate
Outer tub cover
Inner cover shaf t
Inner cover shaf t
Outer tub cover shaft groove
Outer tub cover shaft groove
Inner cover component
I enlarged view
II enlarged view
Figure 1 Figure 2
Bottom plate
Soft items
Front
Back
Two claws at the bottom
cover shall be inserted in
two bar-shaped holes in
the stand. Make sure the
claws are firmly in place.
Fasten the bottom plate
to base frame with one
screw.
Loading...