HWM70-1203D
7kg
HWM70-1203D
Arial Regular，18pt ,100%black colour
S
1000
1200
800
400
RPMC
Mixed
90
IntenseExtra Rinse Start/Pause
Spin Speed
Wash Temp.
Spin/Drain
HIGH SPEED
1200rpm
AUTOMATIC FRONT LOADING WASHING MACHINE
USER MANUAL
HWM70-1203D
HWM80-1403D
tAbLe oF contents
03 - 09
10 - 15
16- 20
beFore use using the AppLiAnce MAINTENANCE
COMPONENTS> ................................03
PREPARATION................................0> 4
SAFETY INSTRUCTIONS> ....................05
INSTALLATION> .................................06
CONTROL PANEL> .............................08
LEGEND
Yes
No
Optional
For your safety, any instructions in this manual with this "Warning" sign must be followed strictly.
IMPORTANT DISPOSAL INSTRUCTIONS
As a responsible manufacturer we care about the environment. As such we urge you to follow the
correct disposal procedure for your product and packaging materials.
PROGRAM SELECTION> ......................10
CONSUMPTION AND TECHNICAL DATA> .....
WASHING METHODS> .......................12
CLEANING & CARE> ...........................16
DISPLAY CODES> ...............................18
TROUBLESHOOTING........................1> 9
11
IMPORTANT SAFETY INFORMATION.. .....20 >
This will help conserve natural resources and ensure that it is recycled in a manner that protects health
and the environment.
You must dispose of this product and its packaging according to local laws and regulations. Because
this product contains electronic components, the product and its accessories must be disposed of separately from household
waste when the product reaches its end of life.
Contact your local authority to learn about disposal and recycling. The product and packaging should be taken to your local
collection point for recycling. We apologise for any inconvenience caused by minor inconsistencies in these instructions,
which may occur as a result of product improvement and development.
03
Before use
8kg
HWM80-1403D
Arial Regular，18pt ,100%black colour
S
1000
1400
800
400
RPM
C
Mixed
90
IntenseExtra RinseStart/Pause
Spin Speed
Wash Temp.
Spin/Drain
HIGH SPEED
1400rpm
components
Manufacturer’s Warranty
Please read this warranty card carefully. Attach your purchase receipt to this warranty card and keep in
a safe place. You must produce both warranty card and proo f of purchase in the event of a warranty
repair being required.
When you purchase any new Haier Product you automatically receive a two year Manufacturer's
Warranty covering parts and labour for servicing.
The Manufacturer undertakes to:
Repair or, at its option, rep lace without cost to the owner eith er for material or labour any part of the
Product, the serial number of which appears on the Product, which is found to be defec tive within TWO
YEARS from the
date of purchase.
This warranty DOES NOT cover:
A Service calls which are not related to any defect in the Product. The cost of a service call will be
charged if the problem is not found to be a Product related fault. For example:
1. Correct the insta llation of the product.
2. Provide Instr uction on use of the product o r change the setup of the pro duct.
3. Replace ho use fuses or correct house wiring.
4. Correc ting fault(s) caused by the us er.
5. Noise or vibration that is considered normal.
6. Water on the fl oor due to incorrect loading or excessive suds.
7. Blocked pumps, r emoval of foreign objects/subst an
ces from the machine, including the pump
and inlet house filters.
8. Correcting damage caused by pests, eg. rats, cockroaches etc.
9. Correct corrosion or disco louration due to chemical attack.
10. Power outages or surges.
B Defects caused by factors other than:
1. Normal domestic use or
2. Use in accordance with the Produ ct’s User Guide.
C Defects to the Product caused by accident, neglect, misuse or ‘Act of God’.
D The cost of repairs car ried out by non-authorised repairers or the cost of c orrecting such
unauthorised repairs.
E Normal recommended maintenance as set out in the Product’s User Guide.
F Repairs when the appliance has been
dismantled, repaired or serviced by othe r than an
AUTHORISED CUSTOMER SERVICE CENTRE or the selling dealer.
G Pick up and delivery.
H Transportation or travelling costs involved in the repair when the product is ins talled outside the
AUTHORISED CUSTOMER SERVICE CENTRE’S normal service area.
This product has been designed for use in a normal domestic environment. It is not intended for
commercial use. Doing so may affect product warranty.
Service under this warranty must be provided by an Authorised Ser vice Repairer (refe r to the Customer
Care section for contact details). Such service shall be provided duri
ng normal business hours. This
warranty certificate should be shown when making any claim.
Note:
This Warranty is an extra benefit and does not affect your legal rights and applies o nly to product
purchased in New Zealand and Australia. Please keep this Warranty Card in a safe place.
For Australian customers:
Our goods come with guarantees that cannot be excluded under the Austr alian Consumer
Law. You are entitled to a replacement or refund for a major f ailure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired o r replaced if
the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
THANKS FOR PURCHASING A HAIER PRODUCT
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you
get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the
new owner can become familiar with the appliance and safety warnings.
ACCESSORIES
Check the accessories and literature in accordance with this list:
1x Inlet hose assembly
1x User manual
1x Warranty card
1x Drain hose bracket
HWM80-1403D
4x Blanking plugs
04
BEFORE USE
7kg
HWM70-1203D
Arial Regular，18pt ,100%black colour
S
1000
1200
800
400
RPMC
Mixed
90
Intense Extra Rinse Start/Pause
Spin Speed
Wash Temp.
Spin/Drain
HIGH SPEED
1200rpm
T1
T2
T3
S1
S2
S4
S3
T4
PREPARATION
PREPARING THE MACHINE
Remove all the packing materials prior to use, including the polystyrene base. Upon opening the
package, water drops may be seen on the plastic bag and the porthole. This is normal phenomenon
resulting from water tests in the factory.
DESCRIPTION
This diagram may differ slightly from the layout of the washing machine you have just purchased due
to technical improvements.
05
Before use
sAFety instructions
BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME
DO ...
... Make sure that the transport bolts are removed.
... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable when
unplugging the power supply.
... Make sure that the fuses in the power circuit are rated
for 15A.
... Keep away from heat sources and direct sun light to
prevent plastic and rubber components from aging.
... Make sure that the power cord is not caught under or
in the appliance and avoid damage to the power cable.
... Check that hose joints and connections are firm and no
water can leak. If joints are loose or there is leakage, turn off the
water supply and refix. Do not use the washing machine until the
hoses are properly fixed.
DURING DAILY USE OF THE APPLIANCE
DO ...
... Pull up zips and fix loose threads to prevent the items
from being entangled. If necessary, put small items into a laundry
bag to avoid damage.
... Turn off the machine after each wash program and
switch it off at the mains to save electricity and for safety. Wipe
clean the lower part of the porthole.
... Keep the door slightly open when the washing machine
is not in use to prevent formation of odours.
... The power cord must be replaced by the manufacturer,
service agent or qualified persons, if it is damaged.
... Ensure that the appliance is not used by persons
with reduced physical, sensory or mental capabilities, lack of
experience and knowledge without supervision or instruction by a
person responsible for their safety.
... Supervise children to ensure that they do not play with
the appliance.
DO NOT ...
... Touch or use the appliance when barefoot or with wet
or damp hands or feet.
... Use flammable detergent or dry cleaning agent.
... Use any flammable sprays in close vicinity to the
appliance.
... Remove or insert the plug in the presence of flammable
gas.
... Allow children or infirm persons to play with the appliance
or packing materials.
... Install the appliance outdoors in a damp place, or in an
area which may be prone to water leaks such as under or near a
sink unit. In the event of a water leak allow the machine to dry
naturally.
... Place the washing machine directly on a carpet, or close
to a wall or furniture.
DO NOT ...
... Touch the washer door during the washing process - it gets
hot!
...Place heavy objects or sources of heat or damp on top of
the appliance.
... Hot wash foam rubber or sponge-like materials.
... Open the detergent distribution drawer during the wash
cycle.
... Force the washer door open. The door is fitted with a
self-lock device and will open shortly after the washing procedure is
ended.
... Open the washer door if the water level is visibly over the
porthole.
... Cover the washing machine with a cover that may keep
dampness in.
06
Before use
3.
1.
2.
4.
instALLAtion
5.
REMOVING THE TRANSPORTATION BOLTS
The transportation bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Remove the back cover.1.
Remove the four bolts on the rear side and take out the synthetic 2.
stabilisers from within the machine.
Replace the back cover.3.
Fill the holes left by the bolts with blanking plugs.4.
Note:
1.When replacing the back cover, ensure convex surface is
facing outwards, and insert the back cover between he gap
as shown in Fig. 5.
2.Keep the transportation bolts and synthetic stabilisers
in a safe place for later use.
ADJUSTING THE WASHING MACHINE
There are adjustable feet under the bottom of the washing machine. Before use, they should be
adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will also
reduce wear and tear. We recommend using a spirit level to level the appliance.The floor should be as
stable and flat as possible.
Loading...