Haier HWM65VA, HWM68VA User Manual

(If there's breakdown, please pull off the power plug before checking) The following

phenomena are not breakdowns sometimes. Please confirm again before sending
it to repair. If there are real breakdowns, please come to the special maintenance

department or after-sale service department of our company. Do not repair it by yourself.

Safety precautions
Installation and adjustment

Preparation before washing

Usage of the detergent

Washing sequence

Names of the parts

Packing list

Trouble-Shooting Answers to question
Specification

SEMI AUTO WASHING MACHINE

HWM65VA

USER

Manual

WASHING MACHINE

CONTENTS

Maintenance

Do s and don ts

Trouble-shooting Answers to question

14

°

Specification

Water level Water quantity estimated (L)

Maximum/48 Medium/39 Minimum/33

6.5(HWM65VA) 6.8(HWM68VA)

Injection pressure(MPa)

0.02~0.2

Standard spinning capacity(kg)

4.5

Largest washing capacity(kg)

Standard washing capacity(kg)

6.0

Rated voltage frenquency

220V-240 50Hz

Phenomena

Use it when the power is on.
Insert the power plug tightly.
Remove the foreign materials?

Put down the drain hose?
Remove the foreign material?

Please contact the after-sales
service department.

Level the machine properly.

Pressed the gland evenly

Remove the laundries
Remove a little laundries

The reason

How to settle

The machine does

not function.

Is there power failure?
Is the power plug loose?
Is the pulsator twisted by

foreign materials?

Has the drain hose being
laid down?
Is the drain hose blocked
by foreign material?
Are there any laundries
trapped at the outer side
of the spin tub?

There's abnormal
sound during

washing

Remove the hair pin, coins or
metal items

Are there hair pin, coins
or metal items brought
inside the tub?

Is the machine slanting?
Is the gland pressed evenly?

Are the laundries in spin tub over
loaded?

Are there any laundries trapped
at the outer side of the spin tub?

There's abnormal
sound and violent
vibration during
spinning

The draining does

not function

Specifications may be subject to change
without prior notice

*

HWM68VA

0030807643

Water inlet hose

Gland

Lint filter

Packing list

Semi Auto washing machine

Name

Quantity

User's manual

One piece

One piece

One piece

One piece

One set

Warranty card

One piece

3.install the
after cleaning, install it as origin assure it reliable

protective cover

Cleaning the

protective cover

2.cleaning dirty under the
take out the sundries using the plier or other wiry

protective cover

Wipe the complete unit with soft

cloth twisted dry.

Wipe with neutral detergent if too dirty

Do not wash it directly by water

After washing, dismount the water inlet
hose.
Do not store water in the tub for long
period. Discharge the water immediately
after each using.
Pull off the power plug and hang up the
power cord.
Hang up the drain hose.
Wipe off the water drops on the surface
and inside the tub with clean soft cloth.
Open the cover of the wash tub and the
inner/outer cover of the spin tub for
some time (about one hour), then close
them.

Disposal of the complete unit

Thinner

Alcohol

Petrol

If the laundries fall to the outer side of the spin tub,
Please contact the after-sales service department.

If the laundries fall to the outer side of the spin tub

Trouble-shooting Answers to question

13

Cleaning the overflow filter

2. Take off the corrugation pipe.
Dismantle the upper part of the
corrugation pipe inside the
overflow filter (

).

3. Cleaning the overflow filter
Clean the lint around the filter
and flush with tap water.

4. Install the filter.
(1).Install the corrugation pipe.

Insert the mounting plate at
the bottom of the into
the valve cover.

Hang up the hook at the left
upper side.

Push the upper part in as

indicated in Figure 2.

as indicated in

Figure 1

overflow

(2).

filter

(3).

(4).

Corrugation

Pipe

Hook

Figure 1

Figure 2

Water level
adjusting lever

Push

Cleaning the protective cover

Cleaning method:

1.Push as the figure ,take down the protective
cover as the arrowhead way

During washing clothes,must use
Finished washing everytime ,please clean lint on the
surface
Please clean lint under the termly

protective cover

protective cover

Down

Meaning and description of the symbols

Warning sign

Forbidding sign

Contents marked with that symbol are related

to the safety of the product and the personal
safety of the users. Please operate in strict

conformity to the contents, otherwise it may

cause damage of the machine or injure the

personal safety of the user.

Contents marked with that symbol are actions

forbidden to perform. Performing of those
actions may result in damage of the machine
or injure the personal safety of the user.

Please check if the power receptacle has good earthing
condition before using to guarantee your safety.

Names of the parts

Outer cover of the spin tub

Inner cover of the spin tub

Spin tub

Cabinet

Power cord

Base frame

Wash selector

Wash timer

Control panel
Overflow filter

Water level adjusting lever

Lint filter(Installed by user)

Pulsator

Wash tub
Drain hose

Wash tub cover

Water inlet

Major frame

protective cover

Valve cover

12 1