Haier HWM60-918NZP User Manual
User’s Manual
Fully Automatic Washing Machine
Index
Safety precautions ...............2
Packing list ...........................4
Names of the parts ...............4
Installation and
adjustment............................5
Preparation before
washing................................9
This manual is for
HWM60-918NZP
Please read this manual carefully before using.
Retain it for future reference.
Use the operation buttons ....
Disposal after washing .......
Trouble-shooting Answer
to question..........................
Specification .......................
0030809305
11
13
15
16
Safety precautions
Meaning and description of the symbols
Contents marked with that symbol are related to the safety
of the product and the personal safety of the users. Please
operate in strict conformity to the contents, otherwise it may
Warning sign
Forbidden sign
Please check if the power receptacle has good earthing condition before using to guarantee
your safety.
Please check if the water faucet is open, and if the connection of the water inlet pipe is
proper.
It is suggested to use foamless washing powder.
Please don’t use the washer in the environment below 0 °C; if the washer has been stored
below 0°C, please be sure to ensure the washer is placed under the room temperature
for 2~4 hours and then use otherwise the washing effects may be lowered or the
washer may be damaged.
cause damage of the machine or injure the personal safety
of the user.
Contents marked with that symbol are actions forbidden to
perform. Performing of those actions may result in damage
of the machine or injure the personal safety of the user.
Please inser t the power cord into special receptacle with rated voltage.
Be sure to use single-phase three pins receptacle.The earthing terminal of
the receptacle must be earthed reliably. If possible,please adopt electric
leakage protector.
The washing machine must be positioned so that the plug is accessible. Be
sure to pull the plug off and close the water faucet in following cases: power
failure, delivering the machine, setting the machine idle or cleaning the
machine.
Do not plug or pull the power plug with wet hand.
Do not bend ,extend, twist, bind or alter the power cord by force. Do not press
or nip it with weight.
Keep the pin of the power plug clean, if the power plug is polluted with dust,
please wipe with dry cloth carefully.
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
Do not let the machine share one receptacle with other
electric appliances. If the plugging into the receptacles
loose, do not use the plug any more.
2
In case the washing machine is installed on ground
with carpet, do not block the ventilation hole
with carpet.
Do not put the machine at damp place like the
bathroom. Never wash it with water. Do not put wet
laundries on the control panel.
Do not wash water-proof laundries like the raincoat,
bike covers etc. to avoid abnormal vibrations
in spinning. Wash the clothes that can float
on the water surface easily, please be careful
especially,for fear damage.
Do not stretch hands into the working machine. It is
dangerous even if the rotation is slow. Take special
care of the children.
Do not put any hot or heavy items (such as the
kettle with hot water ) on the washing machine.
Do not wash laundries with volatile materials (such
as thinner, petrol etc.)
The children shall not approach the working
washing machine.
Keep the machine away from direct sunlight and
heat source like the heater.
Do not decompose, repair or alter the machine by
yourself.
Do not use water hotter than 50 °C.
3
Packing list
Fully automatic
washing machine
Water inlet hose Bottom plate Tapp i ng s c rew s
Names of the parts
Pulsator
Hanging hole
Drain hose
Upper cabinet
Cabinet handle
Screw cover(right)
Fixed foot(3 pieces)
Water absorption cushion
(One Package)
Top lid component
Control panel seat
Adjustable foot
Trundle control handle
User’s manual
Warranty card
Liquid whitener inlet
Balance ring
Outer tub cover
Filter cover
Lint filter A
Detergent inlet
Control panel film
Inner tub
Lint filter B
Adjustable foot film
Water inlet valve
The lint filter B which is opposite to
the lint filter A can be used as
detergent box.
All illustrations in this Manual are
given for reference only. Your
products and accessories may
show differences from these
illustrations due to our continuous
improvement.
4
Screw cover(left)
Power line
Back cover
Lower cabinet
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is very important
to your security and correct operating the machine.
1. move the control handle of trundle to
the point 1 and the control handle fix on
the second reference column; then insert
the base panel from the side and fix it in
the suitable site which aim to the hool of bolt.
the control handle of trundle
the second
reference colunm
Bottom plate
The washing machine away from wall should be overrun 20mm. The largest allowable slope
of the shank base of the machine is 2°. The slanting or rough ground will result in unstable
running or stoppage of the machine. Please adjust it with following methods:
Confirm
Hang the lead line to check if it is horizontal.
it's horizontal:
the frist reference colunm
pullback spring
the operation of trundle
figure 1 figure 2
2.Caste hit the control handle position
shown in the figure ,the control will be
fixed by the frist reference columns to
install the screw into the bottom of the
washing machine with a screwdriver,
then gently propped.
the adjustable foot
Screw
Front
Back
CarpetCarpet
Adjust the adjustable foot:
To twist the adjustable foot, please fi rst lift up the side of the leg slightly, loosen the
1.
adjustable nut, and twist the foot. Please make sure to keep the washing machine
in balance.
After adjustment, fasten the nut.
2.
The adjustable foot
5
Loading...