Haier HWM60-728 User Manual
User's manual
This manual is for
HWM60-728
Please read this manual
carefully before using.
Retain it for future reference.
Fully automatic washing machine
0030808120
Packing list Specification
Installation and adjustment
Preparation before washing
Put in the laundries
Usage of the detergent
Close the top lid
Disposal after washing
Finish washing
Contents
Names of the parts
Safety precautions
Meaning and description of the symbols
Use the operation buttons
Trouble shooting Answer to question
1
Please check if the power receptacle has good earthing condition before
using to guarantee your safety.
Warning sign
Forbidden sign
Contents marked with that symbol are related
to the safety of the product and the personal
safety of the users. Please operate in strict
conformity to the contents, otherwise it may
cause damage of the machine or injure the
personal safety of the user.
Contents marked with that symbol are actions
forbidden to perform. Performing of those
actions may result in damage of the machine
or injure the personal safety of the user.
Control panel seat
Lint filter
Inner tub
Cabinet
Fixed foot
(3 pieces)
Adjustable foot
Top lid component
Pulsator
Water inlet valve
Control panel film
Back cover
Power line
Adjustable foot film
Drain hose
Hanging hole
of drain hose
Handle
Liquid whitener inlet
Notes: All illustrations in this Manual are given for reference only. Your products
and accessories may show differences from these illustrations due to our
continuous improvement.
Names of the parts
Meaning and description of the symbols
Filter cover
Drain outlet
protecting cover
Water absorption cushion
Prain hose bushing
2
Safety precautions
Please plug the power plug on special
220V/10A receptacle. Be sure to use
single-phase three pins receptacle.
Ensure the earthing prong of the
power receptacle is earthed reliably.
Use leakage protector if possible.
The power cord plug should be convenient to be pluged in or pluged out with
hand while the washing machine runs
normally.Be sure to pull the plug out
and close the water tap when the machine is idle,when moving the machine,
or when cleaning the machine.Do not
use wet hand to insert or pull out the
power plug.
Do not damage the power cord,bend,extend,twist,bind or alter it by force.Do not press
or nip it with weight.If the power cord or the power plug is bad,or the power plug
becomes flexible,to avoid risk it is required to
have it replaced by the technicians of
our special shop or the after-sale service
department.Keep the pin of the power plug
clean,if the power plug is polluted with dust,
please wipe with dry cloth carefully.
Do not put the machine at damp
place like the bathroom . Never
wash it with water. Do not place
wet laundries on the control panel.
Do not use water hotter than 50 C .
In case the washing machine is installed on ground with carpet, do not
block the ventilation hole with carpet.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.
Earth
3
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
Safety precautions
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.Dot not let the children climb
the washing mechine.
Pe
tr
o
l
Thin
ne
r
Please check if the water faucet is open, and if the connection of the water inlet
pipe is proper.
It is suggested to use low-foaming washing powder.
Please don t use the washer in the environment below 0 ; if the washer has
been stored below 0 , please be sure to ensure the washer is placed under the
room temperature for 2 4 hours and then use otherwise the washing effects may
be lowered or the washer may be damaged.
To change the direction of drain pipe, please contact the customer care agent of
our company.
4
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Soft items
Back
Front
Bottom plate
Screw
Install the bottom plate
After opening the package, please lean the washing machine gently down
on soft items (like towel cloth,blanket, etc.). Install the bottom plate to the
bottom of the machine with screws by a cross screwdriver, then lift the
machine up gently. See to the figure:
Adjust the Installation position
The washing machine away from wall should be overrun 20mm. The largest
allowable slope of the shank base of the machine is 2 .The slanting or rough
ground will result in unstable running or stoppage of the machine.
Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is horizontal.
Fasten
Loosen
High
Low
the adjustable nut
the adjustable foot
Adjust the adjustable foot:
1 .To twist the adjustable foot, please first lift up the side of the foot slightly, loosen
the adjustable nut, and twist the foot.
2 . After adjustment, fasten the nut.
Loading...