Haier HWM60-20B User Manual

Full Automatic Washing Machine

This manual is for

HWM60-20B

User's manual

Please read this manual
carefully before using.
Retain it for future reference.

0030507862

Contents

Specifications.....................................................................................the 2ndcover

Names of the parts................................................................................................1

Safety precautions .............................................................................................2

Installation and adjustment ...................................................................................4

Preparation before washing .................................................................................8

Put in the laundries ..............................................................................................9

Usage of the detergent ........................................................................................9

Use the operation buttons ..................................................................................10

Close the top lid .................................................................................................13

Finish washing ....................................................................................................13

Disposal after washing .......................................................................................14

Trouble shooting Answer to question.............................................................15

Packing list .........................................................................................................16

Specification

Water level/Water
quantity (about)

Water inlet pressure MPa

Rated washing /
spinning capacity kg

1/15L 2/18L 3/23L 4/26L 5/28L

6/31L 7/33L 8/35L 9/38L 10/42L

0.03-0.78

6.0/6.0

Names of the parts

Top lid

Detergent box

Control panel

Liquid detergent
inlet

Lint filter
(Installed by user)

Filter cover
Inner tub

Pulsator

Control panel
film

Cabinet

Notes: All illustrations in this Manual are given for reference only. Your products and
accessories may show differences from these illustrations due to our
continuous improvement.

Water valve

Water absorption
cushion

Power line

Hanging hole
for the drain
hose

Adjustable foot
stick

Adjustable foot

Fixed foot (3)

Cabinet handle

Drain hose

ack cover

Meaning and description of the symbols

Warning sign

Forbidden sign

Please check if the power receptacle has good earthing
condition before using to guarantee your safety.

Contents marked with that symbol are related to the safety
of the product and the personal safety of the users. Please
operate in strict conformity to the contents, otherwise it may
cause damage of the machine or injure the personal safety
of the user.

Contents marked with that symbol are actions forbidden to
perform. Performing of those actions may result in damage
of the machine or injure the personal safety of the user.

1

Safety precautions

Please plug the plug on special receptacle
with rated voltage. Be sure to use single­phase three pins receptacle. Ensure the
earthing prong of the power receptacle is
earthed reliably. Use leakage protector if
possible.

Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or
nip it with weight. If the power cord or the power plug is bad, or the power plug becomes
flexible, to avoid risk it is required to have it replaced by
the technicians of our special shop or the after-sale
service department. Keep the pin of the power plug
clean, if the power plug is polluted with dust, please
wipe with dry cloth carefully.

In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.

The ventilation holes

at the bottom

soft items

The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use wet hand to insert
or pull out the power plug.

Do not use water hotter above 50 C .

Do not put the machine at damp place like
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.

Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.

2

Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.

Safety precautions

Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children. Do not let the children
climb the washing machine.

Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.

The handicapped or children without
care shall not use the machine.

Do not decompose, repair or alter the
machine by yourself.

Do not wash laundries with volatile
materials (such as thinner, petrol etc.)

Petrol

nner

Thi

Keep the machine away from direct
sunlight and heat source like the heater.

To prevent the lint inside the tub from blocking
the cascade outlet during washing, please
keep the lint filter in good condition, and
install it to proper position. If the lint filter
is lost or damaged, please contact the local
after-sales service department of our company.

Dismantle

Install

To protect your laundries and wash­ing machine, please take out all of the
coins, buttons, sand, hairpin and
other foreign materials before washing.

Please check if the water faucet is open,
and if the connection of the water inlet
pipe is proper.
It is suggested to use foamless washing
powder.

3

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.

Install the lint filter

Push the lint filter downward to
location for lint filter.

Install the bottom plate

After you open the package, please lean
the washing machine gently down on soft
items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of the
machine with the eight screws by a cross
screwdriver, then lift the machine up gently.
See to the figure:

Adjust the installation position

The largest allowed slope of the
shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:

Dismantle

Install

Bottom plate

Back

Front

Screw

Soft items

Adjust the adjustable foot:

1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.

2.Fasten the nut after adjustment.

4

Loosen

High

adjustable nut

Fasten

adjustable foot

Low