Disposal after washing .......................................................................................14
Trouble shooting· Answer to question.............................................................15
Packing list Specification...................................................................................16
Names of the parts
Top lid component
Control pannel
Filter frame
Balance ring
Lint filter
Inner tub
Pulsater
Front control board
Cabinet
Water absorption
cushion
Detergent box
Handle
Adjustable leg
film
Adjustable leg
(2 pieces)
Water inlet valve
Meaning and description of the symbols
Warning sign
Contents marked with that symbol are related to the safety
of the product and the personal safety of the users. Please
operate in strict conformity to the contents, otherwise it may
cause damage of the machine or injure the personal
of the user.
Back cover
Drain bushing
Fixed leg
(2 pieces)
safety
Forbidden sign
Contents marked with that symbol are actions forbidden to
perform. Performing of those actions may result in damage
of the machine or injure the personal safety of the user.
1
Safety precautions
Please plug the plug on special receptacle
with rated voltage. Be sure to use singlephase three pins receptacle. Ensure the
earthing prong of the power receptacle is
earthed reliably. Use leakage protector if
possible.
Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or
nip it with weight. If the power cord or the power plug is bad, or the power plug becomes
flexible, to avoid risk it is required to have it replaced by
the technicians of our special shop or the after-sale
service department. Keep the pin of the power plug
clean, if the power plug is polluted with dust, please
wipe with dry cloth carefully.
Do not put the machine at damp place like
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use
or pull out the power plug.
wet hand to insert
Do not use water hotter above 50 C .
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
0 C
5
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
The ventilation
holes at the bottom
Soft object
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.
2
Safety precautions
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children. Do not let the children
climb the washing machine.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
The handicapped or children
without
care shall not use the machine.
Do not decompose, repair or alter the
machine by yourself.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
etrol
r
e
P
n
hi n
T
Keep the machine away from direct
sunlight and heat source like the heater.
Please keep the lint filter in good condition, and
install it to proper position during washing. If the
lint filter is lost or damaged, please contact the local
customer care agent.
Install
The co ver of li nt filter
lint filter
Dismantle
Dismantle
li nt filter
The back cover of lint filter
Install
To protect your laundries and washing machine, please take out all of the
coins, buttons, sand, hairpin and
other foreign materials before washing.
Please check if the water faucet is open,
and if the connection of the water inlet
pipe is proper.
It is suggested to use foamless washing
powder.
3
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the bottom plate
After you open the package, please lean
the washing machine gently downon soft items
( like the towel cloth,blanket, etc. ). Install the
bottom plate from front to back,then lift the
machine up gently. See to the figure:
Front
B
ak
c
Bottom plate
Soft items
Adjust the Installation position
The largest allowable slope of the shank base of the machine is 2.The slanting or rough ground
will result in unstable running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is
horizontal.
<2
Adjust the adjustable leg:
Your washer has 2 adjustable legs,which are located
on the front bottom conners.After properly placing your
washer in its final position,you can adjust your washer .
The adjustable legs can be adjusted by turning them
counterclockclockwise to raise your washer or turning
them clockwise to lower your washer.See to the figure
Warn ing:Leveling of washer is very important to
prevent vibration during spin.
High
the adjustable leg
Low
4
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.