Haier HWM55-0528 User Manual

Double-drive automatic washing machine	User's manual

This manual is for

HWM55-0528

Please read this manual carefully before using. Retain it for future reference.

Contents

Names of the parts

Safety precautions

Installation and adjustment

Usage of the drain hose

Installation the water inlet hose Preparation before washing

Put in the laundries

Usage of the detergent

Close the top lid

Use the operation buttons Finish washing

Disposal after washing Trouble shooting *Answer to question

Packing list *Specification

Names of the parts

Top lid component Inner cover component Detergent box

Control panel seat Outer tub cover Lint filter(2 pieces) Balance ring Inner tub Filter cover(2 pieces)

Pulsator

Attachment block(2 pieces) Front control board Cabinet

Fixed leg (3 pieces)

Adjustable leg

Water inlet valve

Round cover

Water absorption cushion

Power cord

Cabinet handle

Drain hose

Back cover	Jacket of
	drain hose

Adjustable foot seam

Meaning and description of the symbols

		Contents marked with that symbol are related
	Warning sign	to the safety of the product and the personal
		safety of	the users. Please operate in strict
		conformity to the contents, otherwise it may
		cause damageof the machine or injure the
		personal safety of the user.
	Forbidding sign	Contents marked with that symbol are actions
		forbidden to perform. Performing of those
		actions	may result in damage of the machine
		or injure the personal safety of the user.

Please check if the power receptacle has good earthing condition before using to guarantee your safety.

Safety precautions

Please insert the power cord into special receptacle with rated voltage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector.

When the machine is normally using, please put the power plug at the location easily to be inserted and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle.

If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean.

	Do not put the machine at damp						Do not use water hotter than 50 C .
	place like			the bathroom . Never
	wash it			with water. Do not place
	wet laundries on the control panel.

In case the washing machine								is in-	Do not wash water-proof laundries like
stalled on ground with carpet,								do not	the raincoat, bike covers etc. to avoid
block the ventilation hole with carpet.									abnormal vibrations in spinning.
							The ventilation holes
							at the bottom

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.