Disposal after washing .......................................................................................15
Trouble shootingAnswer to questions.............................................................16
Packing list .........................................................................................................17
Specifications
Water level/Water
quantity ( )
Water inlet pressure
Rated washing /
spinning capacity(kg)
L
1/172/203/234/275/30
6/337/378/419/4410/47
0.03MPa-0.78MPa
5.0 (weight of standard dry cloth)
Names of the parts
Top lid
Detergent box
Control panel seat
Location for
up lint filter
Down lint filter
Access for
liquid bleacher
Inner tub
Pulsator
Control panel film
Cabinet
Fixed foot
Adjustable foot
Handle
Adjustable foot label
Water inlet valve
Water absorption
cushion
Block cover
(do not dismantle)
Power cord
Drain hose hanging hole
Drain hose
Back cover
Meaning and description of the symbols
Warning sign
Forbidden sign
Contents marked with that symbol are related to the safety
of the product and the personal safety of the users. Please
operate in strict conformity to the contents, otherwise it may
cause damage of the machine or injure the personal safety
of the user.
Contents marked with that symbol are actions forbidden to
perform. Performing of those actions may result in damage
of the machine or injure the personal safety of the user.
1
Safety precautions
Please plug the plug on special 220V AC
receptacle. Be sure to use single-phase
tow pins receptacle. Ensurethe earthing
prong of the power receptacle is earthed
reliably. Use leakage protector if possible.
Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press
or nip it with weight. If the power cord or the power plug is bad, or the power plug
becomes flexible, to avoid risk it is required to have it replaced by
the technicians of our special shop or the after-sale
service department. Keep the pin of the power plug
clean, if the power plug is polluted with dust, please
wipe with dry cloth carefully.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
The power cord plug should be convenient
to be plugged in or plugged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use wet hand to insert or pull out the power plug.
Do not use water hotter above 50 C .
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
The ventilation holes
at the bottom
Carpet
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
2
Safety precautions
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children. Do not let the children
climb the washing machine.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not decompose, repair or alter the
machine by yourself.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
l
Petro
nner
Thi
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
3
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the bottom plate
After you open the package, please lean the
washing machine gently down on soft items
( like the towel cloth, blanket, etc. ). Install the
bottom plate to the bottom of the machine with
the eight screws by a cross screwdriver,
then lift the machine up gently. See to the figure:
Adjust the installation position
The largest allowed slope of the
shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
2.Fasten the nut after adjustment.
Loosen
High
Screw
Low
Back
Front
Soft items
Bottom plate
adjustable nut
Fasten
adjustable foot
4
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.